cvv20131231_10k.htm

UNITED STATES SECURITIES AND EXCHANGE COMMISSION

Washington, D.C. 20549

________________

Form 10-K

 

(Mark One)

 

ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934.

   
 

For the fiscal year ended December 31, 2013

   

TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(d) OF THE SECURITIES EXCHANGE ACT OF 1934.

   
For the transition period from ____ to _____

 

Commission file number: 1-16525

 

CVD EQUIPMENT CORPORATION

(Exact name of registrant as specified in its charter)

 

New York

11-2621692

(State or Other Jurisdiction of
Incorporation or Organization)

(I.R.S. Employer Identification No.)

355 South Technology Drive

Central Islip, New York 11722

(Address including zip code of registrant’s Principal Executive Offices)

 

(631) 981-7081
(Registrant’s Telephone Number, Including Area Code)

 

Securities registered under Section 12(b) of the Act:

 

Title of each class

Name of each exchange on which registered

   

Common Stock, Par value $0.01

NASDAQ Capital Market

 

Securities registered under Section 12(g) of the Act:
None

 

Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.                                                                                                                                         Yes ☐    No ☑

 

Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.                                                                                                                                     Yes ☐    No ☑

 

Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.                                                                                                                                        Yes ☑    No ☐

 

Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Website, if any, every Interactive Data file required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§232.405 of this chapter) during the preceding 12 months/(or for such shorter period that the registrant was required to submit and post such files).                                                                               Yes ☑    No ☐

 

Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§229.405 of this chapter) is not contained herein, and will not be contained, to the best of the registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K.                                                                                                            Yes ☐   No ☑

 

Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer,” and “smaller reporting company” in Rule 12b-2 of the Exchange Act.                          Large accelerated filer ☐   Accelerated filer ☐   Non-accelerated filer ☐ Smaller reporting company ☑

 

Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Exchange Act).                                                                                                                                                    Yes ☐ No ☑

 

State the aggregate market value of the voting and non-voting common equity held by non-affiliates computed by reference to the price at which the common equity was last sold, or the average bid and asked price of such common equity, as of the last business day of the registrant’s most recently completed second fiscal quarter: $40,518,370 at June 30, 2013

 

Indicate the number of shares outstanding of each of the registrant’s classes of common stock, as of the latest practicable date: 6,111,057 shares of Common Stock, $0.01 par value at March 15, 2014.

 

DOCUMENTS INCORPORATED BY REFERENCE: None.

__________________________________________________________________________

 

 
 

 

 

PART I

 

INFORMATION CONCERNING FORWARD-LOOKING STATEMENTS

 

Except for historical information contained herein, this Annual Report on Form 10-K contains forward–looking statements within the meaning of Section 27A of the Securities Act of 1933 and Section 21E of the Securities Exchange Act of 1934. These statements involve known and unknown risks and uncertainties that may cause our actual results or outcomes to be materially different from any future results, performance or achievements expressed or implied by such forward-looking statements. These forward-looking statements are based on various factors and are derived utilizing numerous important assumptions and other important factors that could cause actual results to differ materially from those in the forward-looking statements. Important assumptions and other factors that could cause actual results to differ materially from those in the forward-looking statements, include, but are not limited to: competition in our existing and potential future product lines of business; our ability to obtain financing on acceptable terms if and when needed; uncertainty as to our future profitability, uncertainty as to the future profitability of acquired businesses or product lines, uncertainty as to any future expansion of the Company. Other factors and assumptions not identified above were also involved in the derivation of these forward-looking statements and the failure of such assumptions to be realized as well as other factors may also cause actual results to differ materially from those projected. We assume no obligation to update these forward-looking statements to reflect actual results, changes in assumptions, or changes in other factors affecting such forward-looking statements. Past performance is no guaranty of future results.

 

Item 1.          Description of Business.

 

The use of the words “CVD,” “we,” “us” or “our” refers to CVD Equipment Corporation, a New York corporation incorporated on October 13, 1982, and its subsidiaries, except where the context otherwise requires.

 

We design, develop and manufacture custom and standard state-of-the-art equipment and process solutions used to develop and manufacture solar, nano and advanced electronic components, materials and coatings for research and industrial applications, with the focus on enabling tomorrow’s technologies™. We offer a broad range of chemical vapor deposition, gas control and other equipment that is used by our customers to research, design and manufacture semiconductors, solar cells, smart glass, carbon nanotubes, nanowires, LEDs, MEMS and industrial coatings used for medical, aerospace and other applications, as well as equipment for surface mounting of components onto printed circuit boards. Through our Application Laboratory, we provide process development support and process startup assistance. Our proprietary products are generally customized to meet the particular specifications of individual customers and to accelerate the commercialization of their proprietary intellectual property. We also offer standard products that are based on the expertise and know-how we have developed in designing and manufacturing our customized products.

  

 
1

 

 

Based on more than 30 years of experience, we use our engineering, manufacturing and process development to transform new applications into leading-edge manufacturing solutions. This enables university, research and industrial scientists at the cutting edge of technology to develop next generation solar, nano, LEDs, semiconductors and other electronic components. We also develop and manufacture research and production equipment based on our proprietary designs. We have built a significant library of design expertise, know-how and innovative solutions to assist our customers in developing these intricate processes and to accelerate their commercialization. This library of solutions, along with our vertically integrated manufacturing facilities, allows us to provide superior design, process and manufacturing solutions to our customers on a cost effective basis.

 

Part of our strategy is to target opportunities in the research and development and production equipment market, with a focus on higher-growth applications such as medical, aerospace, solar smart glass, carbon nanotubes, nanowires, graphene, MEMS and LEDs. To expand our penetration into these growth markets, we have a line of proprietary standard products and custom systems. Historically, we manufactured products on a custom one-at-a-time basis to meet an individual customer’s specific research requirements. Our new proprietary systems leverage the technological expertise that we have developed through designing these custom systems onto a standardized basic core. This core is easily adapted through a broad array of available add-on options to meet the diverse product and budgetary requirements of the research community. By manufacturing the basic core of these systems in higher volumes, we are able to reduce both the cost and delivery time for our systems. These systems, which we market and sell under the EasyTube® product line, are sold to researchers at universities, research laboratories, and startup companies in the United States and throughout the world.

 

Sales of our proprietary standard, custom systems and process solutions have been driven by building on the success of our installed customer base, which includes several Fortune 500 companies. Historically, revenues have grown through sales to existing customers to meet additional capacity needs or new requirements, as well as to new customers. However, with the proprietary solutions and our expanded focus on “accelerating the commercialization of tomorrow’s technologiesTM” we are developing a new customer base. We have generally gained new customers through word of mouth, the movement of personnel from one company to another; limited print advertising and trade show attendance. We are now also gaining new customers by awareness of our company in the marketplace with results from our Application Laboratory, partnerships with startup companies, increased participation in trade shows and expanded internet advertising.

 

The core competencies we have developed in equipment and software design, as well as in systems manufacturing and process solutions, are used to engineer our finished products and to accelerate the commercialization path of our customer base. Our proprietary real-time, software allows for rapid configuration, and provides our customers with powerful tools to understand, optimize and repeatedly control their processes. Our vertically integrated structure allows us to control the manufacturing process, from bringing raw metal and components into our manufacturing facilities to shipping out finished products. These factors significantly reduce cost, improve quality and reduce the time it takes from customer order to shipment of our products. Our Application Laboratory allows selected customers to bring up their process tools in our Application Laboratory and to work together with our scientists and engineers to optimize process performance.

 

We conduct our operations through two divisions: (1) CVD/FirstNano, which includes our First Nano (“CVD/FirstNano”) and Conceptronic product lines (“CVD/Conceptronic”); and (2) Stainless Design Concepts (“SDC”). Each division operates on a day-to-day basis with its own operating manager while product development, sales and administration are managed at the corporate level.

  

 
2

 

 

Operating Divisions

 

CVD/First Nano supplies state-of-the-art chemical vapor deposition systems for use in the research, development and manufacturing of semiconductors, LEDs, carbon nanotubes, nanowires, solar cells and a number of industrial applications. We utilize our expertise in the design and manufacture of chemical vapor deposition systems to work with laboratory scientists to bring state-of-the-art processes from the research laboratory into production, as well as to provide production equipment and process solutions based on our designs. CVD/First Nano also operates our Application Laboratory where our personnel interact effectively with the scientists and engineers of our customer base. CVD/Conceptronic designs and manufactures reflow ovens and rework stations for the printed circuit board assembly and semi-conductor packaging industries. CVD/First Nano operates out of our main facility in Central Islip, New York.

 

Stainless Design Concepts (SDC) designs and manufactures ultra-high purity gas and chemical delivery control systems for state-of-the-art semiconductor fabrication processes, solar cells, LEDs, carbon nanotubes, nanowires, and a number of industrial applications. Our SDC products are sold on either a stand-alone basis, or together with our CVD/First Nano systems. SDC operates out of a 22,000 square foot facility fitted with Class 10 and Class 100 clean room manufacturing space located in Saugerties, New York.

 

Principal Products

 

Chemical Vapor Deposition - A process which passes a gaseous compound over a target material surface that is heated to such a degree that the compound decomposes and deposits a desired layer onto substrate material. The process is accomplished by combining appropriate gases in a reaction chamber, of the kind produced by the Company, at elevated temperatures (typically 150-1,800 degrees Celsius). Our Chemical Vapor Deposition systems are complete and include all necessary instrumentation, subsystems and components and include state-of-the-art process control software. We provide both standard and specifically engineered products for particular customer applications. Some of the standard systems we offer are for Silicon, Silicon-Germanium, Silicon Dioxide, Silicon Nitride, Polysilicon, Liquid Phase Epitaxial, Metalorganic Chemical Vapor Deposition, Carbon Nanotubes, Graphene Nanowires, Solar Cell research and Solar material quality control.

 

Our Chemical Vapor Deposition systems are available in a variety of models that can be used in laboratory research and production. All models are offered with total system automation, a microprocessor control system by which the user can measure, predict and regulate gas flow, temperature, pressure and chemical reaction rates, thus controlling the process in order to enhance the quality of the materials produced. Our standard microprocessor control system is extremely versatile and capable of supporting the complete product line and most custom system requirements. These Chemical Vapor Deposition systems are typically priced between $80,000 and $1,500,000 but can go significantly higher.

  

 
3

 

 

Rapid Thermal Processing (“RTP”) - Used to heat semiconductor materials to elevated temperatures of up to 1,000 degrees Celsius at rapid rates of up to 200 degrees Celsius per second. Our RTP systems are offered for implant activation, oxidation, silicide formation and many other processes. We offer systems that can operate both at atmospheric or reduced pressures. Our RTP systems are priced up to $600,000.

 

Annealing and Diffusion Furnaces - Used for diffusion, oxidation, implant anneal, solder reflow, solar cell manufacturing and other processes. The systems are normally operated at atmospheric and/or reduced pressure with gaseous atmospheres related to the process. An optional feature of the system allows for the heating element to be moved away from the process chamber allowing the wafers to rapidly cool or be heated in a controlled environment. Our cascade temperature control system enables more precise control of the wafers. The systems are equipped with an automatic process controller, permitting automatic process sequencing and monitoring with safety alarm provisions. Our annealing and diffusion furnace systems are priced up to $900,000.

 

Ultra-high Purity Gas and Liquid Control Systems - Our standard and custom designed gas and liquid control systems, which encompass, gas cylinder storage cabinets, custom gas and chemical delivery systems, gas and liquid valve manifold boxes and gas isolation boxes, provide safe storage and handling of pressurized gases and chemicals. Our system design allows for automatic or manual control from both a local and remote location. A customer order often includes multiple systems and can total up to $1,000,000.

 

Quartz ware - We provide standard and custom fabricated quartz ware used in our equipment and other customer tools. We also provide repair and replacement of existing quartz ware.

 

Convection Furnaces – We provide proprietary reflow ovens used by the printed circuit board assembly and semiconductor packaging industries.

 

Reflow Furnaces and Rework Stations – We provide standard and custom systems for the printed circuit board and surface mount technology industries. Our equipment is designed to melt solder in a controlled process to form superior connections between components, creating complete electronic circuits for computers and telecommunication systems, as well as for the automotive and defense industries.

 

Markets and Marketing

 

Due to the highly technical nature of our products, we believe it is essential to contact customers directly through our sales personnel and through a network of domestic and international independent sale representatives and distributors specializing in the type of equipment we sell. Our primary marketing activities include direct sales contacts, participation in trade shows and our internet websites. We are also focusing our efforts on being in the top listings on many search engines in order to increase the number of “hits” to our websites.

  

 
4

 

 

Customers

 

We are continuing to work on expanding our product offerings. Many of these products are used in research and in production applications. We sell our products primarily to electronic component manufacturers, institutions involved in electronic component research (such as universities, government and industrial laboratories) and to industries such as aerospace that require specialized coatings. We have both an international and domestic installed customer base in excess of 200 customers to whom we have sold systems within the last three years.

 

For the twelve months ended December 31, 2013, approximately 27.3% of our revenues were generated from foreign sales compared to 24.4% for the twelve months ended December 31, 2012. Revenue from a single customer in any one year can exceed 10.0% of our total sales. In fiscal year 2013 one customer represented 23.7% of our annual revenues and in 2012 another customer represented 16.6% of our annual revenues, respectively. We are not generally dependent on any single customer; however, the loss of any key customer would have to be replaced by others, as we have previously, and our inability to do so may have a material adverse effect on our business and financial condition.

 

Warranties

 

We normally warrant our equipment for a period of twelve to eighteen months after shipment, depending on the product, and pass along any warranties from original manufacturers of components used in our products. We provide for our own equipment servicing with in-house field service personnel. Warranty costs, including those incurred in fiscal years 2013 and 2012, have been historically insignificant and expensed as incurred.

 

Competition

 

We are subject to intense competition. We are aware of other competitors that offer a substantial number of products and services comparable to ours. Many of our competitors (including customers who may elect to manufacture systems for internal use) have financial, marketing and other resources greater than ours. To date, we believe that each of our two operating divisions has been able to compete in markets that include these competitors, primarily on the basis of technical performance, quality, delivery and price.

 

CVD/First Nano competes primarily with in-house design and engineering personnel at research and university laboratories with the capacity to design and build their own equipment internally. Due to budgetary and funding constraints, many of these customers are extremely price sensitive. CVD/First Nano also competes with companies that have substantially greater financial, marketing and other resources to develop new products and support customers worldwide, as well as smaller competitors. We believe that our systems are among the most advanced available for the targeted market space. CVD/First Nano and CVD/Conceptronic’s proprietary reflow ovens and rework stations are used by the printed circuit board assembly and semiconductor packaging industries. CVD/Conceptronic also offers customized products for complex applications within the printed circuit board and other industries that use conveyor-type ovens in heating and drying applications. Our in-house design and engineering personnel develop leading edge technology for sale at competitive prices. CVD/Conceptronic competes with companies that are larger than our company and have substantially greater financial, marketing and other resources than we do. We believe that our reflow ovens and rework stations are among the most advanced available having leveraged our experience in designing and building customized products for our customers.

  

 
5

 

 

SDC competes with companies that are larger than our company and have substantially greater financial, marketing and other resources than we do. We believe that SDC’s gas management and chemical delivery control systems are among the most advanced available. We further believe that SDC is differentiated from our competitors through our intimate understanding of how the systems in which our products are incorporated are actually used in field applications. We have gained this understanding as a result of having designed and built complex process gas systems for CVD/First Nano as well as for a number of the world’s leading semiconductor, solar manufacturers, research laboratories and universities.

 

Sources of Supply

 

We do not manufacture many components used in producing our products. Most of these components are purchased from unrelated suppliers. We have some OEM supply contracts covering a selection of these components, although we are not dependent on a principal or major supplier and alternate suppliers are available. Subject to lead times, the components and raw materials we use in manufacturing our products are readily obtainable.

 

We have a fully-equipped machine shop that we use to fabricate most of our metal components in-house, including the most complex designed parts of our equipment. Our investment in CNC machines for our machine shop has increased our efficiencies while significantly reducing costs in production. Similarly, our quartz fabrication capability is sufficient to meet our quartz ware needs.

 

Materials procured from the outside and/or manufactured internally undergo a rigorous quality control process to ensure that the parts meet or exceed our requirements and those of our customers. Upon final assembly, all equipment undergoes a final series of complete testing to ensure maximum product performance.

 

Backlog

 

As of December 31, 2013, our order backlog was approximately $3,917,000 compared to approximately $8,342,000 at December 31, 2012, a decrease of $4,425,000 or 53.0%. The decrease is directly attributable to the purposeful reduction in the amount of new orders accepted during the transition phase of moving to our new Central Islip, New York facility. Now that the move is complete we have resumed our full sales efforts. Since January 1, 2014, we have received approximately $16,312,000 in new orders. The timing for completion of the backlog varies depending on the product mix and can be as long as two years. Included in the backlog are all accepted purchase orders with the exception of those that are included in our percentage-of-completion. Order backlog is usually a reasonable management tool to indicate expected revenues and projected profits, however, it does not provide an assurance of future achievement or profits as order cancellations or delays are possible.

  

 
6

 

  

Intellectual Property

 

Our success is dependent, in part on our proprietary technology and other proprietary rights. We have historically protected our proprietary information and intellectual property such as design specifications, blueprints, technical processes and employee know-how through the use of non-disclosure agreements. In addition, where we deem appropriate, we file for patent and trademark protection of our proprietary technology and intellectual property that has the potential to be incorporated into our standard products and can be sold to multiple customers. We also maintain and/or assert rights in certain trademarks relating to certain of our products and product lines, and claim copyright protection for certain proprietary software and documentation.

 

While patent, copyright and trademark protections for our intellectual property are important to different degrees for our various products and solutions, we believe our future success in highly dynamic markets is most dependent upon the technical competence and creative skills of our personnel and our ability to accelerate the commercialization of next generation intellectual properties. We attempt to protect our trade secrets and other proprietary information through non-disclosure agreements and with our customers, suppliers, employees and consultants other security measures.

 

Research and Development

 

The university research community is at the forefront of nanotechnology research, and we are focused on providing state-of-the-art systems to this market that will help bridge the gap between pioneering research and marketable products. Our Application Laboratory, together with a number of leading universities and startup companies, with whom we partner from time to time, conducts cutting-edge research on the growth of carbon nanotubes, graphene and nanowires as well as on selected solar cell manufacturing processes and smart glass coating processes. The results of this research could have far reaching implications concerning the use and manufacture of carbon nanotubes, graphene and nanowires, solar cell and glass coatings for many markets. Our intention is that together, with these leading universities and start-up companies, we will leverage our collective expertise in this field, which will allow us to capitalize on commercial opportunities in the future. This relationship has thus far produced leading edge results, including what we believe are the tallest carbon nanotube arrays yet developed.

 

In 2012 we expanded our laboratory staff and began independently conducting cutting-edge research and product development for CVD Graphene. On January 9, 2014 we filed provisional patents, covering the promising results we had achieved. In 2013, we incurred approximately $1,837,000 of research and development expenses of which $1,013,000 was independent of external customer orders compared to 2012, when we incurred $1,330,000 of research and development expenses, $389,000 of which was independent of external customer orders.

  

 
7

 

  

Government Regulation

 

We are subject to a variety of federal, state and local government regulations, such as environmental, labor and export control. We believe that we have obtained all necessary permits to operate our business and that we are in material compliance with all laws and regulations applicable to us.

 

We are not aware of any government regulations or requirements necessary for the sale of our products, other than certain approvals or permits which may be required for us to export certain of our products to certain foreign countries.

 

Insurance

 

Some of our products are used in connection with explosive, flammable, corrosive and toxic gases. There are potential exposures to personal injury as well as property damage, particularly if operated without regard to the design limits of the systems and components. Management reviews its insurance coverage with our insurance agent on an annual basis. We have the following types of insurance coverage in amounts we believe are sufficient for our business:

 

Product liability

 

Property and contents

 

General liability

 

Directors and officers

 

Transportation

 

Business auto

 

General umbrella

 

Workers compensation

 

Employee benefits liability

 

Employees

 

At December 31, 2013, we had 171 employees, 169 of which were full time personnel and 2 of which were part time. We had 90 people in manufacturing, 34 in engineering (including research and development and efforts related to product improvement) 9 in field service, 12 in sales and marketing and 26 in general management, maintenance and administration.

 

Item 1A.     Risk Factors

 

Not applicable.

 

Item 1B.     Unresolved Staff Comments

 

None.

 

Item 2.        Description of Property.

  

 
8

 

 

On March 16, 2012, effective as of March 15, 2012, we closed on the purchase of a facility located at 355 South Technology Drive, Central Islip, New York 11722 (the “Facility”) through the Town of Islip Industrial Development Agency (the “Islip IDA”). This 130,000 square foot building replaced our two Ronkonkoma facilities which totaled 63,275 square feet. The transaction was structured pursuant to Section 1031 of the Internal Revenue Code, as amended, to be treated as a reverse tax deferred exchange. In order to avail ourselves of certain real estate and sales tax abatements, the purchase took the form of an assignment and lease purchase agreement with fee title continuing to be vested in the Islip IDA. The Facility was purchased from SJA Industries, LLC for $7,200,000 exclusive of closing costs. The financing consisted of a $6,000,000 loan secured by a mortgage held by HSBC Bank USA, N.A., subject to an installment sale agreement with the Town of Islip Industrial Development Agency. We also incurred additional renovation costs of approximately $5,109,000. We completed the move into the Facility in March 2013.

 

We previously maintained our headquarters at 1860 Smithtown Avenue, Ronkonkoma, New York, where we owned a 50,000 square foot manufacturing facility which we purchased in March, 2002 for $2,161,875. In addition we incurred $1,283,077 for renovations. On April 5, 2013, we sold this facility for the price of $3,875,000 (exclusive of closing costs).

 

Our SDC division operates out of a 22,000 square foot manufacturing facility situated on five acres of land which we purchased in December 1998 and is located at 1117 Kings Highway, Saugerties, New York. The property was purchased from Kidco Realty Corp. The purchase price for the property was $1,400,000. We financed $900,000 of the purchase price. On August 5, 2011, we entered into a $2.1 million five (5) year term loan with HSBC Bank, USA, N.A.,(“HSBC”), to pay off the existing mortgage of approximately $753,000 held by Capital One, Bank, N.A. on the Saugerties property and the two mortgages totaling approximately $1,339,000 held by Capital One Bank, N.A. on the property located at 979 Marconi Avenue, Ronkonkoma, NY 11779. As of December 31, 2013, the balance on this loan was $1,120,000. Interest on the unpaid principal balance accrues at a fixed rate of 3.045%. Borrowings under this term loan are collateralized by a security agreement on substantially all of the personal property of the Company, in addition to a $1 million restriction on funds deposited at HSBC, provided that so long as no event of default has occurred and is then continuing, HSBC will release $200,000 of collateral on each anniversary of the closing date. The restricted balance was reduced to $800,000 on August 5, 2012.

 

Item 3.          Legal Proceedings.

 

On January 26, 2010 the Company commenced an action against Taiwan Glass Industrial Corp. (“Taiwan Glass”) in the United States District Court for the Southern District of New York. By that action, the Company seeks monetary damages ($5,816,000) against Taiwan Glass for breach of contract. The Company believes that Taiwan Glass has no legal basis for unilaterally refusing to accept and pay for equipment specially manufactured for them and shipped to them by the Company. Taiwan Glass has interposed an answer and counterclaims denying these allegations and is seeking unspecified monetary damages. On April 12, 2012, Taiwan Glass filed a motion seeking Partial Summary Judgment in the amount of $3,564,000 (representing the portion of the purchase price that it had previously paid to the Company). By Memorandum and Order dated November 7, 2012, the Court denied the Taiwan Glass Motion in its entirety. Discovery has been completed. The Company is vigorously pursuing its claims against Taiwan Glass and defending against the counterclaims.

  

 
9

 

 

Item 4.      Mine Safety Disclosures.     

 

Not applicable.

 

 
10

 

 

PART II

 

Item 5.          Market for Registrant’s Common Equity, Related Stockholder Matters and Issuer Purchases of Equity Securities

 

Our common stock is listed on the NASDAQ Capital Market under the symbol “CVV.” The following table sets forth, for the periods indicated, the high and low closing prices of our common stock on the NASDAQ Capital Market.

 

   

High

   

Low

 

Year Ended December 31, 2013:

               

1st Quarter

  $ 12.24     $ 9.89  

2nd Quarter

    11.58       7.86  

3rd Quarter

    14.65       8.88  

4th Quarter

    14.61       9.66  

 

   

High

   

Low

 

Year Ended December 31, 2012:

               

1st Quarter

  $ 15.65     $ 10.43  

2nd Quarter

    14.51       11.72  

3rd Quarter

    13.14       9.68  

4th Quarter

    10.39       7.92  

 

As of March 15, 2014 there were approximately 78 holders of record and approximately 2,152 beneficial owners of our common stock, and the closing sales price of our common stock as reported on the NASDAQ Capital Market was $10.98.

 

Dividend Policy

 

We have never paid dividends on our common stock and we do not anticipate paying dividends on common stock at the present time. We currently intend to retain earnings, if any, for use in our business. There can be no assurance that we will ever pay dividends on our common stock. Our dividend policy with respect to our common stock is within the discretion of the Board of Directors and its policy with respect to dividends in the future will depend on numerous factors, including earnings, financial requirements and general business conditions.

 

Under applicable New York law, we would not be permitted to declare and pay dividends if we were insolvent, or would become insolvent by payment of dividends, or if our net assets remaining after payment of dividends would be less than our stated capital.

  

 
11

 

 

Equity Compensation Plan Information Table

 

The following table provides information about shares of our common stock that may be issued upon the exercise of options under all of our existing compensation plans as of December 31, 2013.

 

   

Number of securities to be issued upon exercise of outstanding options, warrants and rights(1)

   

Weighted-average exercise price of outstanding options, warrants and rights(2)

   

Number of securities remaining available for future issuance

 

Plan Category

                       

Equity compensation plans approved by security holders

    162,730     $ 4.44       616,513  

Equity compensation plans not approved by security holders

    --    

N/A

      --  
                         

Total

    162,730     $ 4.44       616,513  

 

(1)     Reflects aggregate options and restricted stock awards outstanding under our 1989 Key Employee Stock Option Plan, 2001 Stock Option Plan and 2007 Share Incentive Plan.

 

(2)     Calculation is exclusive of the value of any unvested restricted stock awards.

 

Recent Sales Of Unregistered Securities

 

None.

 

Issuer Purchases Of Equity Securities

 

None.

 

Item 6.     Selected Financial Data.

 

Not applicable.

 

 
12

 

 

Item 7.

Management’s Discussion and Analysis of Financial Condition and Results of Operations .

 

 

You should read the following discussion and analysis in conjunction with our financial statements and related notes contained elsewhere in this report. This discussion contains forward-looking statements that involve risks, uncertainties and assumptions. Our actual results may differ materially from those anticipated in these forward-looking statements as a result of a variety of factors discussed in this report and those discussed in other documents we file with the SEC. In light of these risks, uncertainties and assumptions, readers are cautioned not to place undue reliance on such forward-looking statements. These forward-looking statements represent beliefs and assumptions only as of the date of this report. While we may elect to update forward-looking statements at some point in the future, we specifically disclaim any obligation to do so, even if our estimates change. Past performance does not guaranty future results.

 

We design, develop and manufacture standard and custom state-of-the-art equipment and process solutions used to develop and manufacture solar, nano, advanced electronic components, materials and coatings for research and industrial applications with the focus on enabling tomorrow’s technologiesTM. We offer a broad range of chemical vapor deposition, gas control and other equipment that is used by our customers to research, design and manufacture semi-conductors, solar cells, smart glass, carbon nanotubes, nanowires, LEDs, MEMS, and industrial coatings used for medical, aerospace and other applications, as well as equipment for surface mounting of components onto printed circuit boards. Our Application Laboratory focuses on higher efficiency material manufacturing for a wide variety of growth markets, as well as accelerating the introduction of nano materials into a range of products and applications, which are marketed through our wholly owned subsidiary, CVD Materials Corporation. In addition, we can provide process development support and process startup assistance. Our proprietary products are generally customized to meet the particular specifications of individual customers and to accelerate the commercialization of their proprietary intellectual property.

 

Based on more than 30 years of experience, we use our engineering, manufacturing and process development to transform new applications into leading-edge manufacturing solutions. This enables university, research and industrial scientists at the cutting edge of technology to develop next generation solar, nano materials, LEDs, semiconductors and other chemical vapor deposited products. We also develop and manufacture research and production equipment based on our proprietary designs. We have built a significant library of design expertise, know-how and innovative solutions to assist our customers in developing these intricate processes and to accelerate their commercialization of chemically deposited materials. This library of solutions, along with our vertically integrated manufacturing facilities, allows us to provide superior design, process and manufacturing solutions to our customers on a cost effective basis.

 

Results of Operations

 

In 2012, we purchased a 120,000 square foot facility located in Central Islip, New York 11722 (the “Property”) through the Town of Islip Industrial Development Agency, (the “Islip IDA”) and subsequently added another 10,000 square feet. This building replaced our two Ronkonkoma facilities which totaled 63,275 square feet.

  

 
13

 

 

Our 2012 and 2013 results of operations were significantly impacted by this transaction. A substantial amount of time and effort was dedicated to purchasing, renovating and moving into the new facility that proved to be disruptive to our continuing operations.

 

Revenue

 

Revenue for the year ended December 31, 2013 was approximately $17,884,000 compared to approximately $22,158,000 for the year ended December 31, 2012, a decrease of $4,274,000 or 19.3%. Annual revenue from the CVD/First Nano division decreased by approximately $5,943,000 or 31.3% to $13,014,000 which represented 72.8% of our total revenue during the year ended December 31, 2013 compared to $18,996,000 or 85.7% of our total revenue for the prior fiscal year. This decrease is directly attributable to the reduction in the amount of new orders accepted during this transition phase as well as the disruption and inefficiencies in production from dismantling and reconstructing equipment during the year. Overall revenue for the three months ended December 31, 2013 was approximately $4,880,000 compared to revenue of approximately $3,213,000 for the three months ended December 31, 2012, an increase of 51.9%, and a further indication that the distractions associated with the transition of moving into the new facility are behind us.

Revenue from outside customers for the SDC division increased by approximately 54.0% or $1,708,000 to $4,870,000 compared to $3,162,000 in the prior fiscal year. The SDC division represented 27.2% and 14.3% of our total revenue during the years ended December 31, 2013 and December 31, 2012 respectively.

 

Gross Profit

 

Overall gross profit in the current year amounted to approximately $6,710,000 with a gross profit margin of 37.5% compared to the gross profit of $7,989,000 with a gross profit margin of 36.1% for the year ended December 31, 2012. The CVD/First Nano division generated a gross profit margin including intercompany transactions of 37.8% for the year ended December 31, 2013, compared to a gross profit margin of 34.1% for the year ended December 31, 2012. We have begun to realize some of the efficiencies of hiring additional engineering and production personnel during the transition to our new Central Islip, New York facility so that they are now trained and productive. The SDC division’s gross profit margin including intercompany transactions increased to 33.8% for the year ended December 31, 2013 compared to 33.4% for the year ended December 31, 2012.

 

Selling, General and Administrative Expenses

 

Selling and shipping expenses were approximately $1,027,000 for the year ended December 31, 2013 compared to $1,237,000 for the year ended December 31, 2012, resulting in a decrease of 16.9% or $209,000. This decrease was primarily attributable to the decrease in commissions earned during 2013.

 

General and administrative expenses for the year ended December 31, 2013 were approximately $6,082,000 compared to $5,123,000 during the year ended December 31, 2012, an increase of $959,000 or 18.7%. This was primarily a result of legal fees related to the Taiwan Glass litigation, and increases in both personnel and occupancy costs.

  

 
14

 

 

Prior to 2012 all research and development expenses were incurred on customer orders and were classified as part of costs of goods sold. In 2012 we expanded our laboratory staff and began independently conducting cutting-edge research and product development for CVD Graphene. On January 9, 2014 we filed provisional patents covering the promising results we had achieved. In 2012 we incurred approximately $389,000 of costs not classified as part of costs of goods sold. We further expanded those efforts in 2013 and incurred approximately $1,013,000 of independent research and product development expenses.

 

In 2013, we incurred bad debt expense of $1,281,000 primarily, due to a major customer (in the solar industry) executing a General Assignment For the Benefit Of Creditors. As a result of that action, we wrote off all existing accounts receivables from that customer and some of the revenue previously recognized using percentage of completion accounting. Remaining equipment that had not been delivered to the customer, which was significant, was placed back in inventory.

 

During the twelve months ended December 31, 2013, we completed the sale of our facility located at 1860 Smithtown Avenue, Ronkonkoma, New York, where our former corporate headquarters was located. The selling price for the facility was approximately $3,875,000 and as a result. We incurred a long-term capital gain on the sale of approximately $887,000.

 

During the twelve months ended December 31, 2012, we completed the sale of our facility located at 979 Marconi Avenue, Ronkonkoma, New York, where our application laboratory was located. The selling price for the facility was approximately $1,659,000 and as a result, we incurred a loss on the sale of approximately $694,000.

 

Operating Loss/Income

 

As a result of the foregoing factors, we incurred an operating loss for the year ended December 31, 2013 of approximately ($1,806,000) compared to approximately $545,000 of operating income for the year ended December 31, 2012.

 

Interest Income

 

Interest income for the year ended December 31, 2013 was approximately $30,000 compared to approximately $32,000 for the year ended December 31, 2012. This decrease is primarily attributable to the decreased cash available as a result of the cash used for the renovations of the new headquarters at 355 South Technology Drive, Central Islip, New York. Our primary investing philosophy for the investment of our cash remains that of minimizing risk.

 

Interest Expense

 

We incurred approximately $164,000 of interest expense in the year ended December 31, 2013, which was approximately $41,000, or 20% less than the $205,000 incurred in the year ended December 31, 2012. This is primarily a result of paying off the mortgage associated with the sale of the former corporate headquarters in April, 2013 and in addition to the utilization of the proceeds received from that sale to reduce the outstanding mortgage on our current headquarters.

  

 
15

 

  

Other Expense/Iincome

 

We incurred approximately $17,000 of other expenses in 2013 compared to other income of approximately $28,000 in 2012. This was primarily attributable to the loss of certain rental income received at the former headquarters as well as income tax refunds received from prior year’s overpayments.

 

Income Tax Provision

 

For the twelve months ended December 31, 2013, we recorded an income tax benefit of approximately $1,396,000. This is primarily the result of applying federal, state and local income tax rates less research and development and other tax credits that we have availed ourselves of on a pre-tax loss of $1,957,000 as compared to an income tax benefit of approximately $35,000 for the twelve months ended December 31, 2012.

 

Net Income

 

As a result of the foregoing factors, for the year ended December 31, 2013, we incurred a net loss of approximately ($560,000) as compared to net income of $436,000 for the same period in 2012.

 

Inflation

 

Inflation has not materially impacted our operations.

 

Liquidity and Capital Resources

 

As of December 31, 2013, we had aggregate working capital of approximately $18,444,000 compared to aggregate working capital of $20,100,000 at December 31, 2012 and had available cash and cash equivalents of approximately $11,248,000 compared to approximately $13,721,000 in cash and cash equivalents at December 31, 2012. The decrease in working capital and cash and cash equivalents of $1,656,000 or 8.2% and $2,473,000 or 18.0%, respectively, is primarily attributable to the costs associated with the renovations of our new Central Islip, New York facility.

 

Accounts receivable, net of allowance for doubtful accounts, decreased by approximately $1,632,000 or 56.6% at December 31, 2013 to $2,883,000 compared to $4,515,000 at December 31, 2012. This decrease is due to reduction in sales and our decision to write off $1,328,000 in accounts receivable as a result of a major customer, in the solar industry, executing a General Assignment For The Benefit Of Creditors as well as the timing of shipments and customer payments.

 

Inventories as of December 31, 2013 were approximately $4,497,000 representing an increase of approximately $1,754,000 or 63.9% compared to the balance of $2,743,000 as of December 31, 2012. This increase in inventory is primarily due to the inclusion of equipment and materials not yet delivered to the solar customer that filed for reorganization.

  

 
16

 

 

As of December 31, 2013, our backlog was approximately $3,917,000, a decrease of $4,425,000 or 53.0% compared to $8,342,000 at December 31, 2012. The decrease is directly attributable to the purposeful reduction in the amount of new orders accepted during this transition phase of moving to the new building. The timing for completion of the backlog varies depending on the product mix and can be as long as two years. Included in the backlog are all accepted purchase orders with the exception of those that are included in our percentage-of-completion. Order backlog is usually a reasonable management tool to indicate expected revenues and projected profits, however, it does not provide an assurance of future achievement or profits as order cancellations or delays are possible.

 

On August 5, 2011, we entered into a $9.1 million credit agreement with HSBC Bank, USA, N.A., (“HSBC”) to replace our $5 million revolving credit agreement and $2.1 million of existing mortgages previously held by Capital One Bank, N.A. This agreement consists of a $7 million revolving credit facility and a $2.1 million five (5) year term loan. The revolving credit facility permits us to borrow on a revolving basis until August 5, 2014. Interest on the unpaid principal balance of the term loan accrues at a fixed rate of 3.045%. Borrowings under the term loan are collateralized by certain assets as defined under the agreement. The balance outstanding as of December 31, 2013 is $1,120,000. We have not utilized this revolving credit facility. The credit agreement also contains certain financial covenants, one of which we were not in compliance with at December 31, 2013. We have secured a waiver by HSBC on that covenant.

 

In March 2002, we received from General Electric Capital Corporation a $2,700,000 mortgage loan, secured by the real property and building and improvements to finance and improve our facility in Ronkonkoma, New York. The mortgage loan, which had an outstanding balance as of December 31, 2012 of $1,007,842, was payable in equal monthly installments of $22,285 including interest at 5.67% per annum; pursuant to an industrial development bond purchase agreement with the town of Islip Industrial Development Agency. We sold the property and building in April, 2013 and paid the remaining balance on the mortgage loan.

 

In April, 2013 we completed the sale of our corporate headquarters located at 1860 Smithtown Avenue, Ronkonkoma, New York. The selling price for the facility was approximately $3,875,000 and as a result we incurred a long-term capital gain on the sale of approximately $887,000. The transaction was structured pursuant to Section 1031 of the Internal Revenue Code, as amended, as a reverse tax deferred exchange.

 

On March 16, 2012, effective as of March 15, 2012, we closed on the purchase of the premises located at 355 South Technology Drive, Central Islip, New York. The purchase price of the building was $7,200,000 exclusive of closing costs. The transaction was structured pursuant to Section 1031 of the Internal Revenue Code, as amended, as a reverse tax deferred exchange. In order to avail ourselves of certain real estate and sales tax abatements, the purchase took the form of an assignment and lease purchase agreement with fee title continuing to be vested in the Town of Islip Industrial Development Agency.

  

 
17

 

 

Pursuant to the terms of an Accommodation Agreement, we entered a loan agreement (the “Loan”) with HSBC Bank USA, N.A. in the amount of $6,000,000, the proceeds of which were used to finance a portion of the purchase price. The Loan is secured by a mortgage against the Central Islip Facility. The loan is payable in 120 consecutive equal monthly installments of principal of $25,000 plus interest thereon and a final balloon payment of $3,000,000. As a result of the Section 1031 transaction a portion of the cash proceeds received from the sale of our previously owned building were used to reduce this loan by $1,309,000. This reduced the final balloon payment scheduled to come due when the Loan matures, to $1,691,000. Interest accrues on the Loan, at our option, at the variable rate of (a) 1.75% above LIBOR, which we chose or (b) a rate equal to 0.5% below HSBC’s prime rate. The Loan matures on March 15, 2022.

 

The large demand for energy savings, energy generation materials and products needed to address rising energy costs creates a growing demand for manufacturing solutions using thin film coatings on glass, wafers and other substrates. Our Application Laboratory will help perfect and expand the multiple areas where low cost thin film manufacturing solutions can be applied and further optimize our technologies for cost and performance. We believe the solar, energy,   electronic, aerospace, medical, LED’s, graphene, nanowires and nanotubes markets we are addressing with multiple products have significant growth opportunities for technologies that deliver favorable cost benefits.

 

We believe that our cash and cash equivalent positions, cash flow from operations and our credit facilities will be sufficient to meet our working capital and capital expenditure requirements for the next twelve months.

 

We may also raise additional funds in the event we determine in the future to effect one or more acquisitions of businesses, technologies or products. In addition, we may elect to raise additional funds even before we need them if the conditions for raising capital are favorable. Any equity or equity-linked financing could be dilutive to existing shareholders.

 

Critical Accounting Policies

 

Use of Estimates

 

The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates. Our significant estimates include accounting for certain items such as revenues on long-term contracts recognized on the percentage-of-completion method, recognition of stock-based compensation, assessment for impairment of our long-lived assets, and the valuation allowances for our income tax provisions.

 

Revenue Recognition

 

We continue to recognize revenues and income using the percentage-of-completion method for custom production-type contracts while revenues from other products are recorded when such products are accepted and shipped. Profits on custom production-type contracts are recorded on the basis of our total estimated costs over the percentage of total costs incurred on individual contracts commencing when progress reaches a point where experience is sufficient to estimate final results with reasonable accuracy. Under this method, revenues are recognized based on costs incurred to date compared with total estimated costs.

  

 
18

 

 

Stock-Based Compensation

 

We record stock-based compensation in accordance with the provisions set forth in ASC 718, “Stock Compensation,” using the modified prospective method. ASC 718 requires companies to recognize the cost of employee services received in exchange for awards of equity instruments based upon the grant date fair value of those awards.

 

Long-Lived Assets

 

Long-lived assets consist primarily of property, plant and equipment. Long-lived assets are reviewed for impairment whenever events or circumstances indicate their carrying value may not be recoverable. When such events or circumstances arise, an estimate of the future undiscounted cash flows produced by the asset, or the appropriate grouping of assets, is compared to the asset’s carrying value to determine if impairment exists pursuant to the requirements of ASC 360-10-35, “Impairment or Disposal of Long-Lived Assets.” If the asset is determined to be impaired, the impairment loss is measured on the excess of its carrying value over its fair value. Assets to be disposed of are reported at the lower of their carrying value or net realizable value. We had no recorded long-lived asset impairment charges in the statement of operations during each of the years ended December 31, 2012 and 2011.

 

Off-Balance Sheet Arrangements

 

None.

 

Item 7A.       Quantitative and Qualitative Disclosures About Market Risk.

 

Not applicable.

 

Item 8.          Financial Statements and Supplementary Data.

 

The consolidated financial statements and supplementary data required by this item are included in this annual report beginning on page F-1.

 

 

Item 9.          Changes in and Disagreements with Accountants on Accounting and Financial Disclosure.

 

None.

  

 
19

 

 

Item 9A.      Controls and Procedures.

 

Disclosure Controls and Procedures. We maintain a system of disclosure controls and procedures (as defined in Rule 13a-15(e) under the Exchange Act). As required by Rule 13a-15(b) under the Exchange Act, management of the Company, under the direction of our Chief Executive Officer and Chief Financial Officer, reviewed and performed an evaluation of the effectiveness of design and operation of our disclosure controls and procedures (as defined in Rule 13a-15(e) under the Exchange Act) as of December 31, 2013. Based on that review and evaluation, the Chief Executive Officer and Chief Financial Officer, along with the management of the Company, have determined that as of December 31, 2013, the disclosure controls and procedures were effective to provide reasonable assurance that information required to be disclosed by us in the reports that we file or submit under the Exchange Act is recorded, processed, summarized and reported within the time periods specified in the SEC’s rules and forms and were effective to provide reasonable assurance that such information is accumulated and communicated to our management, including our principal executive officer and principal financial officer, as appropriate to allow timely decisions regarding required disclosures.

 

Management’s Annual Report on Internal Control Over Financial Reporting. Our management is responsible for establishing and maintaining effective internal control over financial reporting (as defined in Rule 13a – 15(f) of the Exchange Act). There are inherent limitations to the effectiveness of any internal control, including the possibility of human error and the circumvention or overriding of controls. Accordingly, even effective internal controls can provide only reasonable assurance with respect to financial statement preparation. Further, because of changes in conditions, the effectiveness of internal control may vary over time. We have assessed the effectiveness of our internal controls over financial reporting (as defined in Rule 13a -15(f) of the Exchange Act) as of December 31, 2013. In making this assessment, we used the criteria set forth by the Committee of Sponsoring Organizations of the Treadway Commission (COSO) in Internal Control – Integrated Framework. Management concluded that, as of December 31, 2013, our internal control over financial reporting was effective based on the criteria established by the COSO Internal Control Framework.

 

This annual report does not include an attestation report of our registered public accounting firm regarding internal control over financial reporting. Management’s report was not subject to attestation by our registered public accounting firm pursuant to the rules of the Securities and Exchange Commission that permit us to provide only management’s report in this annual report.

 

Changes in Internal Control Over Financial Reporting. There were no changes in our internal control over financial reporting, identified in connection with the evaluation of such internal control that occurred during our last fiscal quarter, that have materially affected, or are reasonably likely to materially affect, our internal control over financial reporting.

  

 

Item 9B.       Other Information.

 

None.

 

 
20

 

 

PART III

 

Item 10.

Directors, Executive Officers, and Corporate Governance.

 

Background and Experience of Directors

 

When considering whether directors and nominees have the experience, qualifications, attributes or skills, taken as a whole, to enable the Board of Directors to satisfy its oversight responsibilities effectively in light of our business and structure, the Nominating, Governance and Compliance Committee focused primarily on each person’s background and experience as reflected in the information discussed in each of the directors’ individual biographies set forth immediately below.  We believe that our directors provide an appropriate mix of experience and skills relevant to the size and nature of our business. As more specifically described in such person’s individual biographies set forth below, our directors possess relevant and industry-specific experience and knowledge in the engineering financial and business fields, as the case may be, which we believe enhances the Board’s ability to oversee, evaluate and direct our overall corporate strategy. The Nominating, Governance and Compliance Committee annually reviews and makes recommendations to the Board regarding the composition and size of the Board so that the Board consists of members with the proper expertise, skills, attributes, and personal and professional backgrounds needed by the Board, consistent with applicable regulatory requirements.

 

The Nominating, Governance and Compliance Committee believes that all directors, including nominees, should possess the highest personal and professional ethics, integrity, and values, and be committed to representing the long-term interests of our shareholders. The Nominating, Governance and Compliance Committee will consider criteria including the nominee’s current or recent experience as a senior executive officer, whether the nominee is independent, as that term is defined in existing independence requirements of the NASDAQ Capital Market and the Securities and Exchange Commission, the business, scientific or engineering experience currently desired on the Board, geography, the nominee’s industry experience, and the nominee’s general ability to enhance the overall composition of the Board.

 

The Nominating, Governance and Compliance Committee does not have a formal policy on diversity; however, in recommending directors, the Board and the Committee consider the specific background and experience of the Board members and other personal attributes in an effort to provide a diverse mix of capabilities, contributions and viewpoints which the Board believes enables it to function effectively as the Board of Directors of a company with our size and the nature of our business.

 

Director Service on other Boards

 

None.

 

 

Legal Proceedings Involving Directors

 

None.

  

 
21

 

 

Board Leadership

 

The Board has no formal policy with respect to separation of the positions of Chairman and CEO or with respect to whether the Chairman should be a member of management or an independent director, and believes that these are matters that should be discussed and determined by the Board from time to time. Currently, Leonard A. Rosenbaum serves as our Chairman, President and CEO. Given the fact that Mr. Rosenbaum, in his capacity as our President and CEO is tasked with the responsibility of implementing our corporate strategy, we believe he is best suited for leading discussions, at the Board level, regarding performance relative to our corporate strategy, and these discussions account for a significant portion of the time devoted at our Board meetings.

 

Our Certificate of Incorporation and Bylaws provide for our Company to be managed by or under the direction of the Board of Directors. Under our Certificate of Incorporation and Bylaws, the number of directors is fixed from time to time by the Board of Directors. The Board of Directors currently consists of six members. Directors are elected for a period of one year and thereafter serve, subject to the Bylaws, until the next annual meeting at which their successors are duly elected by the shareholders.

 

The following table sets for the names, ages and positions with the Company of each of our directors and executive officers, as of March 15, 2014.

 

Name

Age

Position(s) with the Company

Leonard A. Rosenbaum

68

Chairman of the Board of Directors, Chief Executive Officer, President

     

Martin J. Teitelbaum

63

Director, General Counsel and Assistant Secretary

Conrad J. Gunther

67

Director, Chairperson-Audit Committee

Bruce T. Swan

81

Director, Chairperson- Compensation Committee

Kelly S. Walters

43

Director, Chairperson-Finance Committee

Glen R. Charles

60

Chief Financial Officer, Secretary

Karlheinz Strobl

54

Vice President of Business Development

William S. Linss

56

Vice President of Operations-CVD/First Nano Division

Kevin R. Collins

47

Vice President and General Manager-SDC Division

 

 

Leonard A. Rosenbaum

 

Leonard A. Rosenbaum founded the Company in 1982 and has been our President, Chief Executive Officer and has served as Chairman of the Board of Directors since that time. From 1971 until 1982, Mr. Rosenbaum was president, director and a principal stockholder of Nav-Tec Industries, a manufacturer of semiconductor processing equipment similar to the type of some of the equipment we currently manufacture. From 1966 to 1971, Mr. Rosenbaum was employed by a division of General Instrument, a manufacturer of semiconductor materials and equipment.

 

 
22

 

 

Martin J. Teitelbaum, Esq.

 

Martin J. Teitelbaum has served as a member of our Board of Directors and General Counsel since 1985 and as our in-house General Counsel since May 16, 2011. Mr. Teitelbaum is an attorney, who prior to May 16, 2011, conducted his own private practice, the Law Offices of Martin J. Teitelbaum. Prior to establishing his own firm in 1988, Mr. Teitelbaum was a partner at Guberman and Teitelbaum from 1977 to 1987. In addition, Mr. Teitelbaum currently acts as our Assistant Secretary. Mr. Teitelbaum earned a B.A. in Political Science from the State University of New York at Buffalo and a Juris Doctor from Brooklyn Law School. Mr. Teitelbaum has served as our outside General Counsel for many years and his legal expertise makes him an asset to the Company’s board of directors.

 

Conrad J. Gunther

 

Conrad J. Gunther has served as a member of our Board of Directors since 2000. Mr. Gunther has extensive experience in mergers and acquisitions and in raising capital through both public and private means. He has been an executive officer and director of several banks, both public and private, and has served on the boards of two other public companies. He most recently served on the board of GVC Venture Corp., a public company from June 2004 until it merged with the Halo Companies in September 2009. Since January 2008, Mr. Gunther has served as an Executive Vice President and Senior Loan Officer for Community National Bank, a Long Island, New York based commercial bank, where he is responsible for all commercial lending. Mr. Gunther qualifies to serve on our board of directors as a result of his experience and expertise in the financial community.

 

Bruce T. Swan

 

Bruce T. Swan has served as a member of our Board of Directors since September 2003. Mr. Swan who is presently retired has extensive banking, export and international credit experience. He has held the positions of Deputy Manager at Brown Brothers Harriman and Co., Assistant Treasurer at Standard Brands Incorporated, Assistant Treasurer at Monsanto Corporation, Vice President and Treasurer at AM International Inc. and President and Founder of Export Acceptance Company. Mr. Swan, earned his MBA from Harvard University and is a former adjunct faculty member of New York University’s Stern School of Business Administration. Mr. Swan is qualified to serve as an independent member of our board of directors because of his vast expertise and experience in the financial services industry.

 

Kelly S. Walters

 

Kelly S. Walters was appointed a member of the Board of Directors in September, 2009. Mr. Walters is a Senior Vice President at Schwartz Heslin Group Inc., an investment banking and management advisory firm specializing in business and strategic advisory, mergers and acquisitions, and valuation services. Prior to joining Schwartz Heslin, Mr. Walters was managing principal of Forefronts Group, a management consulting firm focused on clean technology, and advanced materials including nanotechnology. Mr. Walters began his investment banking career at Lehman Brothers in 2000 as an associate in the firm’s chemicals and industrials group following four years at Lexmark International, Inc. where he was a senior corporate financial planning analyst. From 2003 to 2007, Kelly was a vice president in the chemicals industry group of Morgan Joseph & Co. prior to joining ThinkEquity LLC as an investment banking principal covering emerging growth companies in the clean technology and nanotechnology industries until 2009. Mr. Walters earned an MA at The Patterson School of Diplomacy and International Commerce at the University of Kentucky where he also earned BA and MBA degrees in economics and finance. Kelly is a Chartered Financial Analyst (CFA), a Certified Management Accountant (CMA) and a Certified Financial Manager (CFM). Mr. Walters is qualified to serve as an independent member of our board because of his experience in the alternative energy and nanotechnology fields.

  

 
23

 

 

Glen R. Charles

 

Glen R. Charles has been the Chief Financial Officer and Secretary of the Company since January, 2004. From 2002 until he joined the Company, he was the Director of Financial Reporting for Jennifer Convertibles, Inc., the owner and licensor of the largest group of sofabed specialty retail stores in the United States. From 1994 to 2002, he was the Chief Financial Officer of Trans Global Services, Inc., a public company providing temporary technical services to the aerospace, aircraft, electronics and telecommunications markets. Mr. Charles has also had his own business in the private practice of accounting. Mr. Charles earned his B.S. in Accounting from the State University of New York at Buffalo.

 

Karlheinz Strobl

 

Dr. Karlheinz Strobl has been the Vice President of Business Development since October 2007. From 1997 to 2007, until he joined the Company, he was the founder and President of eele Laboratories, LLC, a technology and manufacturing solutions development company for a novel Light Engine for the video and data projection display market. Dr. Strobl holds over 14 patents and earned an MBA from Boston University, a PhD from the University of Innsbruck and an MS from both the University of Innsbruck and the University of Padova. He has also worked at the Max Plank Institute and at Los Alamos National Laboratory.

 

William S. Linss

 

William S. Linss is the Vice President, Operations for the CVD/First Nano Division of CVD. In addition to managing daily engineering and production operations, Bill is instrumental in expanding the company’s technology capabilities, developing new products and positioning CVD for growth. Prior to his promotion in 2013, Bill was the Division Manager for the CVD/First Nano Division since 2005. Bill has worked in Semiconductor Manufacturing and Chemical Vapor Deposition for 25 years. From 1980 through 1988 Bill worked at Standard Microsystems Corp. in Hauppauge, NY, advancing to Equipment Engineering Manager with all capital equipment responsibilities for SMC’s MOS/VLSIC manufacturing. Bill was employed by CVD from 1988 through 1994, advancing through various positions as Electrical Systems Designer, Field Service Engineer and Production Manager. From 1994 through 2001 Bill served as a Software Quality Assurance (SQA) Manager with Otari Corporation, at their Long Island pro-audio R&D office; and later with AP Engines in Sacramento, CA, a Cable TV billing solutions start-up.  In 2001, Bill re-joined CVD to head the newly acquired Research International Division for SMT reflow oven manufacturing, which then resulted in CVD’s acquisition of the Conceptronic product line.

  

 
24

 

 

Kevin R. Collins

 

Prior to his appointment as Vice President and General Manager-SDC Division, Mr. Collins served as the General Manager of CVD’s SDC Division since 1999. From 1990 to 1999 he was employed by Stainless Design Corp. as Manager of Field Operations and Product Development Advisor. Mr. Collins attended Columbia University School of Engineering and Applied Science. 

 

 

Code Of Ethics

 

We have adopted a Corporate Code of Conduct and Ethics that applies to our employees, senior management and Board of Directors, including the Chief Executive Officer and Chief Financial Officer. The Corporate Code of Conduct and Ethics is available on our web site, http://www.cvdequipment.com, by clicking on “About Us” and then clicking on “Corporate Overview.”

 

Audit Committee

 

Our Board of Directors has an Audit Committee that consists of Conrad J. Gunther, Bruce T. Swan and Kelly S. Walters. During the fiscal year ended December 31, 2013, the Audit Committee held four meetings. Pursuant to the Audit Committee Charter, the Audit Committee is directly responsible for the appointment, compensation, retention and oversight of the work of any independent registered public accounting firm engaged for the purpose of preparing or issuing an audit report or performing other audit, review or attest services for us, and each such independent auditor shall report directly to the Committee. The Audit Committee also reviews with management and the independent auditors, our annual audited financial statements (including the disclosures under “Management’s Discussion and Analysis of Financial Condition and Results of Operations”), the scope and results of annual audits and the audit and non-audit fees of the independent registered public accounting firm. Furthermore, the Audit Committee reviews the adequacy of our internal control procedures, the structure of our financial organization and the implementation of our financial and accounting policies. Messrs Gunther, Swan and Walters are “independent” under the requirements of the NASDAQ Stock Market.

 

The Board of Directors has determined that Conrad J. Gunther is an “audit committee financial expert” as that term is defined in the rules and regulations of the Securities and Exchange Commission.

 

Section 16(a) Beneficial Ownership Reporting Compliance

 

The rules of the Securities and Exchange Commission require us to disclose late filings of reports of stock ownership and changes in stock ownership by our directors, officers and ten percent shareholders. To our knowledge, based solely on our review of (a) the copies of such reports and amendments thereto furnished to us and (b) written representations that no other reports were required, during our fiscal year ended December 31, 2013, all of the filings for our officers, directors and ten percent shareholders were made on a timely basis.

  

 
25

 

 

Item 11.     Executive Compensation.

 

Summary Compensation Table 

 

The following table sets forth the compensation of our chief executive officer and chief financial officer, and our “named executive officers,” for the years ended December 31, 2013 and 2012. The Company has no executive officers other than the “named executive officers.”

 

Name and
principal position

 

Year

 

Salary ($)

 

Bonus ($)

 

Option Awards ($) (1)

 

All Other Compensation

 

Total ($)

                         
                         

Leonard A. Rosenbaum
President and Chief Executive Officer

 

2013

2012

 

273,896

252,742

 

-

-

 

-

-

 

-

231,651(2)

 

273,896

484.393

                         

Glen R. Charles
Secretary and Chief Financial Officer

 

2013

2012

 

147,788

150,721

 

28,617

23,510

 

-

-

 

-

-

 

176,405

174,231

                   

 

   

Karlheinz Strobl

Vice President of Business Development

 

2013

2012

 

179,587

166,644

 

23,998

23,510

 

30,500(4)

30,500(4)

 

-

-

 

234,085

220,654

                         

Martin J. Teitelbaum

General Counsel and Assistant Secretary

 

2013

2012

 

235,932

230,019

 

39,800

67,320

 

-

-

 

61,900(3)

53,190(3)

 

337,632

350,529

 

                       

William S. Linss

Vice President-Operations CVD/First Nano Division

 

2013

2012

 

170,539

135,000

 

37,844

23,510

 

-

-

 

-

18,838

 

208,383

177,348

                         

Kevin R. Collins

Vice President/General Manager SDC Division

 

2013

2012

 

123,462

115,000

 

26,079

20,133

 

-

-

 

-

-

 

149,541

135,133

 

 

(1)

Amounts shown do not reflect compensation actually received by the named executive officer. Instead, the amounts shown are the compensation costs recognized by CVD in fiscal 2013 and 2012 for option awards as determined pursuant to ASC 718. These compensation costs reflect option awards granted prior to fiscal 2013 and 2012. The assumptions used to calculate the value of option awards are set forth under Note 12 of the Notes to Consolidated Financial Statements. This column represents the grant date fair value of the awards as calculated in accordance with FASB ASC 718 (Stock Compensation). Pursuant to SEC rule changes effective February 28, 2010, we are required to reflect the total grant date fair values of the option grants in the year of grant, rather than the portion of this amount that was recognized for financial statement reporting purposes in a given fiscal year which was required under the prior SEC rules, resulting in a change to the amounts reported in prior Annual Reports.

 

(2) The amount shown is attributable as to $123,480 as a result of the exercise by Mr. Rosenbaum of 21,000 shares of the Company’s common stock in 2012. The balance is attributable to accrued vacation time paid in 2012.

 

(3) The amount shown is a result of the exercise of options to purchase the Company’s common stock.

  

 
26

 

 

(4) The amount shown is attributable to non-qualified stock options to purchase 100,000 shares of the Company’s common stock granted to Mr. Strobl on October 10, 2007 that became exercisable as to 62.5% and 75.0% of the underlying shares on October 10, 2012 and October 10, 2013 respectively. These options were issued at a grant price equal to the then current market price of $4.62. These options expire on October 10, 2017.

 

Employment Agreements and Potential Payments Upon Termination or Change in Control

 

Effective February 18, 2011 (the “Effective Date”), we entered into an Employment Agreement with Martin J. Teitelbaum to employ Mr. Teitelbaum as our General Counsel (the “Employment Agreement”).

 

The Employment Agreement provides for a term of five (5) years, unless earlier terminated pursuant to the employment Agreement. Mr. Teitelbaum shall receive an initial annual base salary of $225,000 in the first year of employment, which shall be increased on the anniversary date of each year of the Effective Date by five (5%) percent over the prior year. As additional compensation, on the Effective Date, we issued Mr. Teitelbaum 20,000 shares of our restricted common stock pursuant to our 2007 Share Incentive Plan, which shall vest annually on each anniversary of the Effective Date, provided that Mr. Teitelbaum remains employed by us on such date, at the rate of 4,000 shares per year. In addition, Mr. Teitelbaum is entitled to receive the same benefits afforded other management level employees of the Company and may, from time to time, be awarded stock options and bonuses as the Board of Directors shall in its sole discretion determine.

 

In the event that we do not maintain an office in Nassau or Suffolk Counties for Teitelbaum to work out of, Mr. Teitelbaum shall have the option of (a) relocating to the new location or (b) receiving a lump-sum payment equal to eighty percent (80%) of his current salary for the balance of the Term, together with any accrued vacation time. In the event of a termination pursuant to the preceding sentence, all options and restricted stock held by or issued in the name of Mr. Teitelbaum shall immediately become fully vested and unrestricted. We shall have the right to terminate the Employment Agreement upon not less than ninety (90) days prior written notice to Mr. Teitelbaum, provided that upon such early termination, we shall pay Mr. Teitelbaum, in a lump sum, an amount equal to 80% of his current Base Salary for the remainder of the Term, together with any accrued vacation time, and all options and restricted stock held by or issued in the name of Mr. Teitelbaum shall immediately become fully vested and unrestricted.

  

 
27

 

 

Outstanding Equity Awards at December 31, 2013

 

The following table sets forth the outstanding equity awards held by our named executive officers as of December 31, 2013.

 

                           

OPTION AWARDS

   

STOCK AWARDS

 
   

Number of

Securities

Underlying

Options

Exercisable

   

Number of

Securities

Options

Unexercisable

   

Exercise

Price

   

Option

Expiration

   

Number of

shares or

units of stock

that have not

Vested

   

Market

Value of

shares or

units of stock

that have not

Vested

   

Equity Incentive

Plan Awards:

Number of

unearned shares

or units that have

not vested

   

Equity Incentive

Plan Awards:

Market or payout

value of

unearned

shares

or units

that have

not vested

 

Name

 

(#)

   

(#)

    ($)    

Date

   

(#)

    ($)    

(#)

    ($)  
                                                                 

Leonard A Rosenbaum

    24,000       -       3.65    

12/12/2017

      -       -       -       -  
                                                                 

Glen R. Charles

    -       -       -       -       -       -       1,000 (2)     14,540  
                                                      14,022 (3)     203,880  
                                                                 

Karlheinz Strobl

    75,000       25,000 (1)     4.62    

10/10/2017

      -       -       1,000 (2)     14,540  
                                                      12,019 (3)     174,756  
                                                                 

Martin J. Teitelbaum

    10,000       -       3.65    

12/12/2017

      16,000       232,640       -       -  
      5,310       -       4.25    

1/15/2020

      -       -       -       -  
      1,400       -       7.90    

1/15/2021

      -       -       -       -  
                                                                 

William S. Linss

                                                    1,000 (2)     14,540  
                                                      24,038 (4)     349,513  
                                                                 

Kevin R. Collins

                                                    750 (2)     10,905  
                                                      14,022 (3)     203,880  

 

 

 

(1)

Options vest as to 12,500 shares on October 12 each year consecutively through 2015.

 

(2)

Restricted stock units vest on April 1 of 2014.

 

(3)

Restricted stock units vest as to 2,003 shares; 2,404 shares; 2,804 shares, 3,205 shares and 3,606 shares respectively each on November 15, 2014 through November 15, 2018

 

(4)

Restricted stock units vest as to 3,205 shares; 4,006 shares; 4,808 shares; 5,609 shares and 6,410 shares respectively each on November 15, 2014 through November 15, 2018.

 

2013 Director Compensation

 

The following table sets forth a summary of the compensation we paid to our non-employee directors in 2013.

 

 

Name

Fees Earned or

Paid in Cash

 

Option Awards (1)

Restricted Stock Awards (1)

 

Total

Conrad J. Gunther

19,000

-

24,384

43,384

Bruce T. Swan

16,000

-

24,384

40,384

Kelly S. Walters

16,000

-

24,384

40,384

Carol R. Levy (2) 4,000 - 6,096 10,096

  

 
28

 

 

 

(1)

Amounts shown do not necessarily reflect compensation actually received by the named director. Instead, the amounts shown are the compensation costs recognized by CVD in fiscal 2013 for awards as determined pursuant to ASC 718. These compensation costs reflect awards granted in fiscal 2012. The assumptions used to calculate the value of option awards are set forth under Note 12 of the Notes to Consolidated Financial Statements.

 

 

(2)

Carol Levy resigned from the Board on February 9, 2013.

 

At a meeting of the Stock Option and Compensation Committee on November 19, 2008, a director compensation plan was adopted applicable to all nonemployee directors, providing for annual compensation in the sum of approximately forty thousand dollars ($40,000) to be payable to each director in a combination of cash, restricted stock grant and stock options.

 

Item 12.

Security Ownership of Certain Beneficial Owners and Management and Related Stockholder Matters.

 

The following table sets forth, as of March 15, 2014, information regarding the beneficial ownership of our common stock by (a) each person who is known to us to be the owner of more than five percent (5%) of our common stock, (b) each of our directors, (c) each of the named executive officers, and (d) all directors and executive officers and executive employees as a group. For purposes of the table, a person or group of persons is deemed to have beneficial ownership of any shares that such person has the right to acquire within 60 days of March 15, 2014.

 

Name and Address of Beneficial Owner(1)

 

Amounts and Nature of

Beneficial Ownership (2)

 

Percent of Class (%)

             

Leonard A. Rosenbaum

 

940,850

(3)    

15.4

Martin J. Teitelbaum

 

72,046

(4)    

1.2

Conrad J. Gunther

 

66,413

(5)    

1.1

Bruce T. Swan

 

12,935

(6)    

*

Kelly S. Walters

 

3,225

(7)    

*

Glen R. Charles

 

15,103

(8)    

*

Karlheinz Strobl

 

86,223

(9)    

1.4

William S. Linss

 

3,404

(10)    

*

Kevin R. Collins

 

59,603

(11)    

1.0

All directors and executive officers and executive employees as a group (eight (8) persons)

 

1,259,802

     

20.6

  


*Less than 1% of the outstanding common stock or less than 1% of the voting power

 

 

(1)

 

The address of Messrs. Rosenbaum, Teitelbaum, Gunther, Swan, Walters, Charles, Strobl, Linss and Collins is c/o CVD Equipment Corporation, 355 South Technology Drive, Central Islip, New York 11722.

  

 
29

 

 

  (2)   All of such shares are owned directly with sole voting and investment power, unless otherwise noted below.

 

  (3)  

Includes options to purchase 24,000 shares of our common stock.

 

 

(4)

 

Includes 2,000 shares held by Mr. Teitelbaum’s wife as to which beneficial ownership thereof is disclaimed by Mr. Teitelbaum, and options to purchase 6,710 shares of our common stock. Does not include 12,000 shares of unvested restricted common stock.

 

 

(5)

 

Includes options to purchase 32,110 shares of our common stock. Does not include 1,275 shares of unvested restricted common stock.

 

 

(6)

 

Does not include 1,275 shares of unvested restricted common stock.

 

 

(7)

 

Includes options to purchase 2,800 shares of our common stock. Does not include 1,275 shares of unvested restricted common stock.

 

  (8)  

Does not include 14,022 units of unvested restricted common stock.

 

  (9)   Includes options to purchase 75,000 shares of our common stock. Does not include options to purchase 25,000 shares of our common stock. Does not include 12,019 shares of unvested restricted common stock.

 

  (10)  

Does not include 24,038 units of unvested restricted common stock.

 

  (11)  

Does not include 14,022 units of unvested restricted common stock.

 

 See Item 5, Market for Registrant’s Common Equity, Related Stockholder Matters, and Issuer Purchases of Equity Securities under the heading “Equity Compensation Plan Information” for information regarding our securities authorized for issuance under equity compensation plans.

 

 
30

 

 

 

Item 13.     Certain Relationships and Related Transactions, and Director Independence.

 

Related Person Transactions

 

We maintain bank accounts and deposit cash in Community National Bank. Conrad Gunther, a director of the Company, is an Executive Vice President and Senior Loan Officer at Community National Bank. We do not pay any fees to Mr. Gunther or Community National Bank in connection with this investment vehicle.

 

Director Independence

 

The current members of our Board of Directors are Leonard A. Rosenbaum, Martin J. Teitelbaum, Conrad J. Gunther, Bruce T. Swan and Kelly S. Walters. Messrs. Gunther, Swan and Walters have been determined to be “independent” as defined under Rule 4200 of the Nasdaq Stock Market.

 

 
31

 

 

Item 14.     Principal Accountant Fees and Services.

 

The following presents fees for professional audit services rendered by MSPC, Certified Public Accountants and Advisors, A Professional Corporation (“MSPC”), for the audit of our financial statements for the years ended December 31, 2013 and December 31, 2012.

 

Audit Fees

 

The aggregate fees billed by MSPC for the annual audit of the Company, quarterly interim reviews of financial statements including our reports on Form 10-Q and services normally provided by them in connection with statutory and regulatory filings for fiscal years 2013 and 2012, were $120,000 and $110,000, respectively.

 

Audit- Related Fees

 

We incurred $9,600 in audit-related fees in 2013 and $10,000 in 2012.

 

Tax Fees

 

Tax fees in 2013 consisted of the tax preparation of the 2012 tax returns by Baker, Tilley, Virchow Krause, LLP, formerly Holtz, Rubenstein Reminick LLP. The aggregate fees billed in 2013 were $18,000. The aggregate fees billed in 2012 were $20,235.

 

All Other Fees

 

We did not incur any other fees in 2013 or 2012.

 

Audit Committee Approval

 

The engagement of the Company’s independent registered public accounting firm is pre-approved by the Company’s Audit Committee. The Audit Committee pre-approves all fees billed and all services rendered by the Company’s independent registered public accounting firm.

 

 
32

 

 

PART IV

 

Item 15.     Exhibits, Financial Statement Schedules

 

3.1

Certificate of Incorporation dated October 12, 1982 of Certificate of Corporation incorporated herein by reference to Exhibit 3.1 to our Form S-1 filed on July 3, 2007.

 

3.2

Certificate of Amendment dated April 25, 1985 of Certificate of Corporation incorporated herein by reference to Exhibit 3.1 to our Form S-1 filed on July 3, 2007.

 

3.3

Certificate of Amendment dated August 12, 1985 of Certificate of Corporation incorporated herein by reference to Exhibit 3.1 to our Form S-1 filed on July 3, 2007.

 

3.4

Bylaws of CVD Equipment Corporation, incorporated herein by reference to Exhibit 3.2 to our Form S-1 filed on July 3, 2007.

 

10.1

Form of Non-Qualified Stock Option Agreement with certain directors, officers and employees of CVD Equipment Corporation incorporated herein by reference to our Registration Statement on Form S-8 No. 33-30501, filed August 15, 1989.*

 

10.2

Purchase Agreement relating to a 22,000 square foot facility from Kidco Realty incorporated herein by reference to our Form 8-K filed on December 31, 1998.

  

10.3

CVD Equipment Corporation 2001 Stock Option Plan incorporated herein by reference to Exhibit 3.1 to our Form S-1 filed on July 3, 2007.*

 

10.4

Form of Non-Qualified Stock Option Agreement incorporated herein by reference to Exhibit 3.1 to our Form 10-KSB filed on March 26, 2007.*

 

10.5

1989 Key Employee Stock Option Plan incorporated herein by reference to Amendment No. 1 to our Form S-1 filed on August 7, 2007.

 

10.6

CVD Equipment Corporation 2007 Share Incentive Plan incorporated herein by reference to our Schedule 14A filed November 5, 2007.

 

10.7

Lease Agreement, dated February 9, 2012, by and between FAE Holdings 411519R, LLC and the Company incorporated by reference from the Company’s Report on Form 10-Q filed with the Commission on May 15, 2012.

 

10.8

Assignment Agreement, dated February 9, 2012, by and between FAE Holdings 411519R, LLC and the Company incorporated by reference from the Company’s Report on Form 10-Q filed with the Commission on May 15, 2012.

 

10.9

Qualified Exchange Accommodation Agreement, dated February 9, 2012, by and between FAE Holdings 411519R, LLC and the Company incorporated by reference from the Company’s Report on Form 10-Q filed with the Commission on May 15, 2012.

  

 
33

 

 

10.10

Joint and Several Hazardous Material Guaranty and Indemnification Agreement, dated March 15, 2012, by and between FAE Holdings 411519R, LLC and the Company incorporated by reference from the Company’s Report on Form 10-Q filed with the Commission on May 15, 2012.

 

10.11

Assignment of Leases and Rents, dated March 15, 2012, by and among FAE Holdings 411519R, LLC, the Town of Islip Industrial Development Agency and HSBC Bank USA, National Association incorporated by reference from the Company’s Report on Form 10-Q filed with the Commission on May 15, 2012.

 

10.12

Amended and Restated Fee and Leasehold Mortgage, dated March 15, 2012, by and among FAE Holdings 411519R, LLC, the Town of Islip Industrial Development Agency and HSBC Bank USA, National Association incorporated by reference from the Company’s Report on Form 10-Q filed with the Commission on May 15, 2012.

 

10.13

Amended and Restated Note, dated March 15, 2012, by and among FAE Holdings 411519R, LLC, the Town of Islip Industrial Development Agency and HSBC Bank USA, National Association incorporated by reference from the Company’s Report on Form 10-Q filed with the Commission on May 15, 2012.

 

10.14

Note and Mortgage Assumption Agreement, dated March 15, 2012, by and among FAE Holdings 411519R, LLC, the Town of Islip Industrial Development Agency and HSBC Bank USA, National Association incorporated by reference from the Company’s Report on Form 10-Q filed with the Commission on May 15, 2012.

 

10.15

Guaranty of Payment, dated March 15, 2012, by the Company incorporated by reference from the Company’s Report on Form 10-Q filed with the Commission on May 15, 2012.

 

10.16

Consolidated and Restated Mortgage Note relating to Registrant’s property known as 1117 Old Kings Highway, Saugerties, New York incorporated by reference to our Current Report on Form 8-K filed on July 7, 2008.

 

10.17

Employment Agreement effective February 18, 2011 between CVD Equipment Corporation and Martin J. Teitelbaum incorporated by reference from our Report on Form 10-Q filed with the Commission on May 11, 2011.

 

10.18

Credit Agreement dated August 5, 2011, by and between CVD Equipment Corporation and HSBC Bank, USA, National Association incorporated by reference to our Report on form 10-Q filed on November 14, 2011.

 

10.19

Contract of Sale, dated May 31, 2012, between CVD Equipment Corporation and Glomel LLC incorporated by reference to our Report on Form 10-Q filed on August 14, 2012.

  

 
34

 

 

21.1

List of Subsidiaries.

 

23.1

Consent of MSPC, Certified Public Accountants and Advisors, A Professional Corporation (S-1).

 

23.2

Consent of MSPC, Certified Public Accountants and Advisors, A Professional Corporation (S-8).

 

23.3

Consent of MSPC, Certified Public Accountants and Advisors, A Professional Corporation (S-8).

 

23.4

Consent of MSPC, Certified Public Accountants and Advisors, A Professional Corporation (S-3).

 

31.1

Rule 13a-14(a)/15d-14(a) Certification of Chief Executive Officer.

 

31.2

Rule 13a-14(a)/15d-14(a) Certification of Chief Financial Officer.

 

32.1

Section 1350 Certification of Principal Executive Officer.

 

32.2 Section 1350 Certification of Principal Financial Officer.

 

101.INS** XBRL Instance

 

101.SCH** XBRL Taxonomy Extension Schema

 

101.CAL** XBRL Taxonomy Extension Calculation

 

101.DEF** XBRL Taxonomy Extension Definition

 

101.LAB** XBRL Taxonomy Extension Labels

 

101.PRE** XBRL Taxonomy Extension Presentation


* Management contract or compensatory plan or arrangement required

 

** XBRL information is furnished and not filed or a part of a registration statement or prospectus for purposes of sections 11 or 12 of the Securities Act of 1933, as amended, is deemed not filed for purposes of section 18 of the Securities Exchange Act of 1934 , as amended, and otherwise is not subject to liability under these sections.

 

 
35

 

 

SIGNATURES

 

In accordance with Section 13 or 15(d) of the Securities Exchange Act of 1934, the registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized.

 

DATE:        March 31, 2014

CVD EQUIPMENT CORPORATION

 

    By: /s/ Leonard A. Rosenbaum

Name:  Leonard A. Rosenbaum

Title:    President and Chief Executive Officer

 

   By: /s/ Glen R. Charles

Name:  Glen R. Charles

Title:    Chief Financial Officer and Secretary

             Principal Financial and Accounting Officer

 

 

 

In accordance with the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the registrant and in the capacities and on the dates indicated below.

 

 

                                                   

NAME   POSITION   DATE
         

/s/ Leonard A Rosenbaum

 

President, Chief Executive Officer and Director

 

March 31, 2014

Leonard A. Rosenbaum

 

(Principal Executive Officer)

   
         

/s/ Martin J. Teitelbaum

 

Director, General Counsel and Assistant Secretary

 

March 31, 2014

Martin J. Teitelbaum

       
         

/s/ Conrad J. Gunther

 

Director

 

March 31, 2014

Conrad J. Gunther

       
         

/s/ Bruce T. Swan

 

Director

 

March 31, 2014

Bruce T. Swan

       
         

/s/ Kelly S. Walters

 

Director

 

March 31, 2014

Kelly S. Walters

       

 

 
36

 

 

CVD EQUIPMENT CORPORATION AND SUBSIDIARies

 

INDEX TO CONSOLIDATED FINANCIAL STATEMENTS

  

 

 

 

Page No.

   

Report of Independent Registered Public Accounting Firm

F-1

   

Financial Statements:

 
   

Consolidated Balance Sheets as of December 31, 2013 and 2012

F-2

   

Consolidated Statements of Operations for the years ended December 31, 2013 and 2012

F-3

   

Consolidated Statements of Changes in Stockholders’ Equity for the years ended December 31, 2013 and 2012

F-4

   

Consolidated Statements of Cash Flows for the years ended December 31, 2013 and 2012

F-5

   

Notes to Consolidated Financial Statements

F-6

 

 

 

 

REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM

 

 

To the Board of Directors and Stockholders

   CVD Equipment Corporation and Subsidiary 

   Central Islip, New York

 

We have audited the accompanying consolidated balance sheets of CVD Equipment Corporation and Subsidiaries as of December 31, 2013 and 2012, and the related statements of operations, changes in stockholders' equity, and cash flows for each of the two years in the two-year period ended December 31, 2013. These consolidated financial statements are the responsibility of the Company's management. Our responsibility is to express an opinion on these consolidated financial statements based on our audits.

 

We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. The Company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. Our audit included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the company’s internal control over financial reporting. Accordingly, we express no such opinion. An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the consolidated financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audits provide a reasonable basis for our opinion.

 

In our opinion, the consolidated financial statements referred to above present fairly, in all material respects, the consolidated financial position of CVD Equipment Corporation and Subsidiaries as of December 31, 2013 and 2012, and the results of their operations and their cash flows for each of the years in the two-year period ended December 31, 2013, in conformity with accounting principles generally accepted in the United States of America.

 

 

 

/s/ MSPC

Certified Public Accountants and Advisors,

A Professional Corporation

 

 

Cranford, New Jersey

March 31, 2014

 

The accompanying notes are an integral part of the consolidated financial statements

 

 
F-1

 

  

CVD EQUIPMENT CORPORATION AND SUBSIDIARIES

Consolidated Balance Sheets

As of December 31,

 

 

   

2013

   

2012

 

ASSETS

               

Current Assets

               

Cash and cash equivalents

  $ 11,247,560     $ 13,721,324  

Accounts receivable, net

    2,883,443       4,515,124  

Costs and estimated earnings in excess of billings on uncompleted contracts

    1,577,969       2,730,104  

Inventories, net

    4,497,349       2,742,905  

Deferred income taxes

    1,443,321       189,153  

Other current assets

    246,240       192,438  

Total Current Assets

    21,895,882       24,091,048  
                 
                 

Property, plant and equipment, net

    15,492,111       12,894,154  

Construction in progress

    128,171       4,051,573  
                 

Deferred income taxes

    710,983       568,744  
                 

Restricted Cash

    800,000       800,000  
                 

Other assets

    70,376       78,128  
                 

Intangible assets, net

    44,116       41,614  

Total Assets

  $ 39,141,639     $ 42,525,261  
                 
                 

LIABILITIES AND STOCKHOLDERS’ EQUITY

               

Current Liabilities

               

Current maturities of long-term debt

  $ 720,000     $ 935,822  

Billings in excess of costs and estimated earnings on uncompleted contracts

    252,890       475,905  

Accounts payable

    468,072       888,058  

Accrued expenses

    1,806,370       1,355,389  

Deferred revenue

    204,527       335,404  

Total Current Liabilities

    3,451,859       3,990,578  
                 

Long-term debt, net of current portion

    4,565,508       7,387,019  

Total Liabilities

    8,017,367       11,377,597  
                 

Commitments and Contingencies (Note 16)

    -       -  
                 

Stockholders’ Equity:

               

Common stock - $0.01 par value – 10,000,000 shares authorized: issued and outstanding, 6,091,707 shares at December 31, 2013 and 6,046,970 shares at December 31, 2012

    60,917       60,470  

Additional paid-in capital

    21,527,375       20,990,891  

Retained earnings

    9,535,980       10,096,303  

Total Stockholders’ Equity

    31,124,272       31,147,664  
                 

Total Liabilities and Stockholders’ Equity

  $ 39,141,639     $ 42,525,261  

 

The accompanying notes are an integral part of the consolidated financial statements

 

 
F-2

 

  

CVD EQUIPMENT CORPORATION AND SUBSIDIARIES

Consolidated Statements of Operations

Years ended December 31,

 

 

   

2013

   

2012

 
                 

Revenue

  $ 17,883,927     $ 22,157,737  
                 

Cost of revenue

    11,173,893       14,169,163  
                 

Gross profit

    6,710,034       7,988,574  
                 

Operating expenses

               

Selling and shipping

    1,027,296       1,236,699  

General and administrative

    6,081,783       5,123,430  

Research & development

    1,013,157       389,410  

Bad debt expense

    1,281,352       -  

(Gain)/loss on sale of buildings

    (887,477 )     693,818  
                 

Total operating expenses

    8,516,111       7,443,357  
                 

Operating (loss) income

    (1,806,077 )     545,217  
                 

Other income (expense):

               

Interest income

    29,931       31,620  

Interest expense

    (163,738 )     (204,874 )

Other (expense)/income

    (16,846 )     28,129  

Total other (expense) net

    (150,653 )     (145,125 )
                 

(Loss)/income before income tax expense

    (1,956,730 )     400,092  

Income tax (benefit)

    (1,396,407 )     (35,494 )
                 

Net (loss)/income

  $ (560,323 )   $ 435,586  
                 
                 

Basic (loss)/earnings per common share

  $ (0.09 )   $ 0.07  

Diluted (loss)/earnings per common share

  $ (0.09 )   $ 0.07  
                 

Weighted average common shares outstanding basic

    6,071,375       6,007,326  
                 

Weighted average common shares outstanding diluted

    6,071,375       6,132,237  

 

The accompanying notes are an integral part of the consolidated financial statements

 

 
F-3

 

  

CVD EQUIPMENT CORPORATION AND SUBSIDIARIES

Consolidated Statements of Changes in Stockholders’ Equity 

 

 

 

                   

Additional

           

Total

 
   

Common Stock

   

Paid-In

   

Retained

   

Stockholders’

 
   

Shares

   

Amount

   

Capital

   

Earnings

   

Equity

 
                                         

Balance – January 1, 2012

    5,958,785     $ 59,589     $ 20,470,367     $ 9,660,717     $ 30,190,673  
                                         

Exercise of stock options

    68,210       682       285,865               286,547  
                                         

Stock-based compensation

    19,975       199       234,659               234,858  
                                         

Net income

                            435,586       435,586  
                                         

Balance – December 31, 2012

    6,046,970     $ 60,470     $ 20,990,891     $ 10,096,303     $ 31,147,664  
                                         

Exercise of stock options

    16,650       167       75,569               75,736  
                                         

Stock-based compensation

    28,087       280       460,915               461,195  
                                         

Net (loss)

                            (560,323 )     (560,323 )
                                         

Balance – December 31, 2013

    6,091,707     $ 60,917     $ 21,527,375     $ 9,535,980     $ 31,124,272  

 

The accompanying notes are an integral part of the consolidated financial statements

 

 
F-4

 

  

CVD EQUIPMENT CORPORATION AND SUBSIDIARIES

Consolidated Statements of Cash Flows

Years ended December 31,

 

   

2013

   

2012

 

Cash flows from operating activities:

               

Net (loss)/income

  $ (560,323 )   $ 435,586  

Adjustments to reconcile net income to net cash used in operating activities

               

Stock-based compensation

    461,195       234,858  

(Gain)/loss on sale of buildings

    (887,477 )     693,818  

(Gain)/loss on sale of other fixed assets

    16,575       (3,288 )

Depreciation and amortization

    646,422       515,215  

Deferred income tax expense

    (1,396,407 )     (178,307 )

Provision for doubtful accounts

    75,071       6,537  

(Increase)/decrease in operating assets

               

Accounts receivable

    1,556,610       (858,082 )

Cost in excess of billings on uncompleted contracts

    1,152,135       680,720  

Inventories, net

    (1,754,444 )     464,168  

Other current assets

    (53,801 )     (41,635 )

(Decrease)/increase in operating liabilities

               

Billings in excess of costs and estimated earnings on uncompleted contracts

    (223,015 )     (1,211,305 )

Accounts payable

    (419,986 )     106,004  

Accrued expenses

    450,982       (271,888 )

Deferred revenue

    (130,877 )     (754,562 )

Total adjustments

    (507,017 )     (617,747 )

Net cash used in operating activities

    (1,067,340 )     (182,161 )
                 

Cash flows from investing activities:

               

Restricted cash

    -       200,000  

Capital expenditures

    (2,071,557 )     (11,796,740 )

Proceeds from sale of building

    3,619,899       1,582,323  

Proceeds from sale of other fixed assets

    -       21,500  

Deposits

    6,833       322,281  

Net cash provided by/(used in) investing activities

    1,555,175       (9,670,636 )
                 

Cash flows from financing activities

               

Net proceeds from stock options exercised

    75,735       286,547  

Proceeds from long-term debt

    -       6,000,000  

Payments of long-term debt

    (3,037,334 )     (848,953 )

Net cash (used in)/provided by financing activities

    (2,961,599 )     5,437,594  
                 

Net decrease in cash and cash equivalents

    (2,473,764 )     (4,415,203 )
                 

Cash and cash equivalents at beginning of year

    13,721,324       18,136,527  
                 

Cash and cash equivalents at end of year

  $ 11,247,560     $ 13,721,324  
                 

Supplemental disclosure of cash flow information:           

               
Income taxes paid   $ 25     $ 451,525  
Interest paid   $ 163,738     $ 204,874  

 

 

The accompanying notes are an integral part of the consolidated financial statements

 

 
F-5

 

 

CVD EQUIPMENT CORPORATION AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

December 31, 2013 and 2012

 

Note 1 – Business Description

 

CVD Equipment Corporation and its subsidiaries (the “Company”), a New York corporation, was organized and commenced operations in October 1982. Its principal business activities include the manufacturing of chemical vapor deposition equipment, customized gas control systems, the manufacturing of process equipment suitable for the synthesis of a variety of one-dimensional nanostructures and nanomaterials and a line of furnaces, all of which are used primarily to produce semiconductors and other electronic components. The Company engages in business throughout the United States and internationally.

 

Note 2 - Summary of Significant Accounting Policies

 

Principles of Consolidation

 

The consolidated financial statements include the accounts of CVD Equipment Corporation and its wholly owned subsidiaries. In December 1998, a subsidiary, Stainless Design Concepts, Ltd., was formed as a New York Corporation. In April 1999, this subsidiary was merged into CVD Equipment Corporation. The Company has two wholly owned subsidiaries: CVD Materials Corporation, which provides marketing for our Application Laboratory and FAE Holdings 411519R, LLC, a real estate holding company whose sole asset is its interest in the real estate and building housing our corporate headquarters.. All significant intercompany accounts and transactions have been eliminated in consolidation.

 

Use of Estimates

 

The preparation of financial statements in conformity with accounting principles generally accepted in the United States of America requires management to make estimates and assumptions that affect the reported amounts of assets and liabilities and disclosure of contingent assets and liabilities at the date of the financial statements and the reported amounts of revenues and expenses during the reporting period. Actual results could differ from those estimates.

 

The Company’s significant estimates are the accounting for certain items such as revenues on long-term contracts recognized on the percentage-of-completion method, depreciation and amortization, valuation allowances for deferred tax assets, impairment considerations of long-lived assets and stock-based compensation.

 

Revenue and Cost Recognition

 

Revenues from fixed price contracts are recognized on the percentage of completion method, measured on the basis of incurred costs to estimated total costs for each contract. This cost to cost method is used because management considers it to be the best available measure of progress on these contracts.

 

 
F-6

 

 

CVD EQUIPMENT CORPORATION AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

December 31, 2013 and 2012

 

Note 2 - Summary of Significant Accounting Policies (continued)

 

Contract costs include all direct material and labor costs and those indirect costs related to contract performance, such as indirect labor, supplies, tools, repairs and depreciation costs.

 

Selling, general and administrative costs are charged to expense as incurred. Provisions for estimated losses on uncompleted contracts are made in the period in which such losses are determined. Changes in job performance, job conditions, and estimated profitability, and final contract settlements may result in revisions to costs and income and are recognized in the period in which the revisions are determined.

 

The asset, “Costs and estimated earnings in excess of billings on uncompleted contracts,” represents revenues recognized in excess of amounts billed.

 

The liability, “Billing in excess of costs and estimated earnings on uncompleted contracts,” represents amounts billed in excess of revenues earned.

 

Inventories

 

Inventories are valued at the lower of cost (determined on the first-in, first-out method) or market.

 

Income Taxes

 

Deferred tax assets and liabilities are determined based on the estimated future tax effects of temporary differences between the financial statements and tax bases of assets and liabilities, as measured by the future enacted tax rates. Deferred tax expense (benefit) is the result of changes in the deferred tax assets and liabilities. The Company records a valuation allowance against deferred tax assets when it is more likely than not that future tax benefits will not be utilized based on a lack of sufficient positive evidence.

 

Investment tax credits are accounted for by the flow-through method reducing income taxes currently payable and the provision for income taxes in the period the assets giving rise to such credits are placed in service. To the extent such credits are not currently utilized on the Company’s tax return, deferred tax assets, subject to considerations about the need for a valuation allowance, are recognized for the carryforward amount.

 

The Company recognizes the tax benefit from an uncertain tax position only if it is more-likely-than-not that the tax position will be sustained on examination by taxing authorities, based on the technical merits of the position. The tax benefits recognized in the financial statements from such a position are measured based on the largest benefit that has a greater than 50% likelihood of being realized upon ultimate settlement. The accounting guidance on accounting for uncertainty in income taxes also addresses derecognition, classification, interest and penalties on income taxes, and accounting in interim periods. The Company does not believe it has any uncertain tax positions through the year ending December 31, 2013 which would have a material impact on the Company’s consolidated financial statements.

 

 
F-7

 

  

CVD EQUIPMENT CORPORATION AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

December 31, 2013 and 2012

 

Note 2 - Summary of Significant Accounting Policies (continued)

 

The Company and its subsidiaries file combined income tax returns in the U.S. Federal and New York State jurisdiction. In addition, the parent company files standalone tax returns in California, Michigan, Minnesota, New Hampshire and Wisconsin. The Company is no longer subject to U.S. federal and state income tax examinations for tax periods before 2010.

 

The Company recognizes interest and penalties accrued related to unrecognized tax benefits, if any, in its income tax provision. The Company had no interest and penalties accrued at December 31, 2013 and 2012.

 

Long Lived Assets

 

Long-lived assets consist primarily of property, plant and equipment. Long-lived assets are reviewed for impairment whenever events or circumstances indicate their carrying value may not be recoverable. When such events or circumstances arise, an estimate of the future undiscounted cash flows produced by the asset, or the appropriate grouping of assets, is compared to the asset’s carrying value to determine if impairment exists pursuant to the requirements of ASC 360-10-35, “Impairment or Disposal of Long-Lived Assets.” If the asset is determined to be impaired, the impairment loss is measured on the excess of its carrying value over its fair value. Assets to be disposed of are reported at the lower of their carrying value or net realizable value. The Company had no recorded impairment charges in the consolidated statement of operations during each of the years ended December 31, 2013 and 2012.

 

Construction in Progress

 

Construction in progress consists of amounts expended for renovating the new facility which was purchased on March 15, 2012. Expenditures for maintenance and repairs are charged to operations as incurred; additions, renewals and betterments are capitalized.

 

Computer Software

 

The Company follows ASC 350-40, “Internal Use Software.” This standard requires certain direct development costs associated with internal-use software to be capitalized including external direct costs of material and services and payroll costs for employees devoting time to the software projects. These costs totaled $10,890 and $4,495 for the years ended December 31, 2013 and 2012, respectively, and are included in Other Assets. All computer software is amortized using the straight-line method over its estimated useful life of three to five years. Amortization expense related to computer software totaled $7,433 and $4,869 for the years ended December 31, 2013 and 2012, respectively.

 

 
F-8

 

  

CVD EQUIPMENT CORPORATION AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

December 31, 2013 and 2012

 

Note 2 - Summary of Significant Accounting Policies (continued)

 

Intangible Assets

 

The cost of intangible assets is being amortized on a straight-line basis over their estimated useful lives ranging from 5 to 20 years. Amortization expense recorded by the Company in 2013 and 2012 totaled $6,964 and $9,228, respectively.

 

Research & Development

 

Research and development costs are expensed as incurred. With our efforts having been utilized exclusively on customer orders, it has historically been included as part of cost of revenue in the consolidated statements of operations. In 2012 we expanded our laboratory staff and began conducting research and development independently. In 2013 we incurred approximately $1,837,000 of research and development expenses of which $1,013,000 were independent of external customer orders compared to 2012, when we incurred approximately $1,330,000 of research and development expenses of which $389,000 were independent of external customer orders.

 

Accounts Receivable

 

Accounts receivable is presented net of an allowance for doubtful accounts of $107,496 and $32,425 as of December 31, 2013 and 2012, respectively. The allowance is based on historical experience and management’s evaluation of the collectability of accounts receivable. Management believes the allowance is adequate. However, future estimates may fluctuate based on changes in economic and customer conditions. The Company doesn’t require collateral from its customers.

 

Product Warranty

 

The Company records warranty costs as incurred and does not provide for possible future costs. Management estimates such costs are immaterial based on historical experience. However, it is reasonably possible that this estimate may differ in future periods.

 

 
F-9

 

 

CVD EQUIPMENT CORPORATION AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

December 31, 2013 and 2012

 

Note 2 - Summary of Significant Accounting Policies (continued)

 

Earnings Per Share

 

Basic net earnings per common share is computed by dividing the net income by the weighted average number of shares of common stock outstanding during each period. When applicable, diluted earnings per common share is determined using the weighted-average number of common shares outstanding during the period, adjusted for the dilutive effect of common stock equivalents, consisting of shares that might be adjusted upon exercise of common stock options and warrants.

 

Potential common shares issued are calculated using the treasury stock method, which recognizes the use of proceeds that could be obtained upon the exercise of options and warrants in computing diluted earnings per share. It assumes that any proceeds would be used to purchase common stock at the average market price of the common stock during the period. 

 

Cash and Cash Equivalents

 

The Company considers all highly liquid financial instruments purchased with an original maturity of three months or less at the date of purchase to be cash equivalents.

 

Concentration of Credit Risk

 

Financial instruments that potentially subject the Company to concentrations of credit risk consist primarily of cash, cash equivalents, and accounts receivable. The Company places its cash equivalents with high credit-quality financial institutions and invests its excess cash primarily in money market instruments. The Company has established guidelines relative to credit ratings and maturities that seek to maintain stability and liquidity. The Company sells products and services to various companies across several industries in the ordinary course of business. The Company routinely assesses the financial strength of its customers and maintains allowances for anticipated losses based upon historical experience.

 

Fair value of Financial Instruments

 

The carrying amounts of financial instruments including cash and cash equivalents, accounts receivable, accounts payable and accrued expenses, and customer deposits approximate fair value due to the relatively short term maturity of these instruments. The carrying value of long-term debt approximates fair value based on prevailing borrowing rates currently available for loans with similar terms and maturities.

 

 
F-10

 

  

CVD EQUIPMENT CORPORATION AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

December 31, 2013 and 2012

 

Note 2 - Summary of Significant Accounting Policies (continued)

 

Stock-Based Compensation

 

The Company records stock-based compensation in accordance with the provisions set forth in ASC 718, “Stock Compensation” using the modified prospective method. ASC 718 requires companies to recognize the cost of employee services received in exchange for awards of equity instruments based upon the grant date fair value of those awards.

 

Shipping and Handling

 

It is the Company’s policy to include freight charges billed to customers in total revenue. The amount included in revenue was $71,179 and $35,779 for the years ended December 31, 2013 and 2012, respectively. Included in selling and shipping expense is $49,232 and $124,541 for shipping and handling costs for each of the years ended 2013 and 2012, respectively.

 

Reclassification 

 

Certain items in the comparative financial statements have been reclassified to conform to the current year's presentation.

 

Recently Adopted Accounting Pronouncements

 

In July 2013, the Financial Accounting Standards Board (“FASB”) issued Accounting Standards Update (“ASU”) 2013-09, Fair Value Measurement (Topic 820): Deferral of the Effective Date of Certain Disclosures for Nonpublic Employee Benefit Plans in Update No. 2011-04. The amendments in this Update apply to certain quantitative disclosure requirements for an employee benefit plan, other than those plans that are subject to the Securities and Exchange Commission’s filing requirements ( hereafter “nonpublic employee benefit plan”), that holds investments in its plan sponsor’s own nonpublic entity equity securities, including equity securities of its plan sponsor’s nonpublic affiliated entities and that are within the scope of the disclosure requirements contained in FASB ASU No. 2011-04, Fair Value Measurement (Topic 820): Amendments to Achieve Common Fair Value Measurement and Disclosure Requirements in U.S. GAAP and IFRSs. The amendments in this Update 2011-04 (Topic 820) of quantitative information about the significant unobservable inputs used in Level 3 fair value measurements for investments held by a nonpublic employee benefit plan in its plan sponsor’s own nonpublic entity equity securities, including equity securities of its plan sponsor’s nonpublic affiliated entities. The amendments in this ASU do not defer the effective date for those certain quantitative disclosures for other nonpublic entity equity securities held in the nonpublic employee benefit plan or any qualitative disclosures. The deferral in this amendment is effective upon issuance for financial statements that have not been issued. This ASU is not expected to have a significant impact of the Company’s financial statements.

  

 
F-11

 

 

CVD EQUIPMENT CORPORATION AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

December 31, 2013 and 2012

 

Note 2 - Summary of Significant Accounting Policies (continued)

 

 

In July 2013, the FASB issued ASU 2013-10, Derivatives and Hedging (Topic 815): Inclusion of the Fed Funds Effective Swap Rate (or Overnight Index Swap Rate) as a Benchmark Interest Rate for Hedge Accounting Purposes. The amendments in this Update permit the Fed Funds Effective Swap Rate to be used as a U.S. benchmark interest rate for hedge accounting purposes under Topic 815, in addition to the US Treasury rate and the London Interbank Offered Rate (“LIBOR”). The amendments also remove the restriction on using different benchmark rates for similar hedges. The amendments are effective prospectively for qualifying new or redesignated hedging relationships entered into on or after July 17, 2013. This ASU is not expected to have a significant impact on the Company’s financial statements.

 

In July 2013, the FASB issued ASU 2013-11, Income Taxes (Topic 740): Presentation of an Unrecognized Tax Benefit When a Net Operating Loss Carryforward, a Similar Tax Loss, or a Tax Credit Carryforward Exists. This ASU applies to all entities that have unrecognized tax benefits when a net operating loss carryforward, a similar tax loss, or a tax credit carryforward exists at the reporting date. An unrecognized tax benefit, or a portion of an unrecognized tax benefit, should be presented in the financial statements as a reduction to a deferred tax asset for a net operating loss carryforward, a similar tax loss, or a tax credit carryforward, except as follows. To the extent a net operating loss carryforward, a similar tax loss, or a tax credit carryforward is not available at the reporting date under the tax law of the applicable jurisdiction to settle any additional income taxes that would result from the disallowance of a tax position or the tax law of the applicable jurisdiction does not require the entity to use, and the entity does not intend to use, the deferred tax asset for such purpose, the unrecognized tax benefit should be presented in the financial statements as a liability and should not be combined with deferred tax assets. The assessment of whether a deferred tax asset is available is based on the unrecognized tax benefit and deferred tax asset that exist at the reporting date and should be made presuming disallowance of the tax position at the reporting date. The amendments in this ASU are effective for fiscal years, and interim periods within those years, beginning after December 15, 2013. For nonpublic entities, the amendments are effective for fiscal years, and interim periods within those years, beginning after December 15, 2014. Early adoption is permitted. This ASU is not expected to have a significant impact on the Company’s financial statements.

 

We believe there is no additional new accounting guidance adopted, but not yet effective that is relevant to the readers of our financial statements. However, there are numerous new proposals under development which, if and when enacted, may have a significant impact on our financial reporting.

 

 
F-12

 

   

CVD EQUIPMENT CORPORATION AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

December 31, 2013 and 2012

 

Note 3 – Uncompleted Contracts

 

Costs, estimated earnings, and billings on uncompleted contracts are summarized as follows:

   

2013

   

2012

 

Costs incurred on uncompleted contracts

  $ 1,807,628     $ 10,733,663  

Estimated earnings

    1,229,038       9,465,412  
      3,036,666       20,199,075  

Billings to date

    (1,711,587 )     (17,944,876 )
    $ 1,325,079     $ 2,254,199  

 

   

2013

   

2012

 

Included in accompanying balance sheets

               

Under the following captions:

               

Costs and estimated earnings in excess of billings on uncompleted contracts

  $ 1,577,969     $ 2,730,104  
                 

               

Billings in excess of costs and estimated earnings on uncompleted contracts

  $ (252,890 )   $ (475,905 )

 

Note 4 - Inventories

 

Inventories consist of:                          

   

2013

   

2012

 
                 

Raw materials

  $ 4,058,350     $ 1,441,370  

Work-in-process

    300,460       304,916  

Finished goods

    138,539       996,619  

Totals

    4,497,349       2,742,905  

 

 

 
F-13

 

 

CVD EQUIPMENT CORPORATION AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

December 31, 2013 and 2012

 

Note 5 – Property, Plant and Equipment

Major classes of property, plant and equipment consist of the following:

 

   

2013

   

2012

 

Land

  $ 2,220,000     $ 2,110,000  

Buildings

    6,631,039       8,903,514  

Building improvements

    5,417,620       1,746,712  

Machinery and equipment

    2,329,299       2,034,012  

Furniture and fixtures

    703,999       356,460  

Computer equipment

    576,111       536,206  

Transportation equipment

    65,994       41,599  

Lab equipment

    1,560,251       1,560,251  

Totals at cost

    19,504,313       17,288,754  

Less: Accumulated depreciation and amortization

    (4,012,202 )     (4,394,600 )
    $ 15,492,111     $ 12,894,154  
                 

Depreciation and amortization expense (1)

  $ 646,422     $ 515,215  

 

 

(1)

Includes amortization expense of $20,434 and $14,096 for the years ending December 31, 2013 and 2012, respectively. Such amortization expense relates to other capitalized and intangible assets.

             

Note 6 – Intangible Assets

2013

Intangible Assets

 

Weighted Average

Amortization Period

   

Cost

   

Accumulated

Amortization

   

Carrying

Amount

 
                                 

Patents & Copyrights

    17     $ 57,818     $ 30,369     $ 27,449  

Intellectual Property

    15       100,000       83,333       16,667  
Licensing Agreement     5       10,000       10,000       0  

Certifications

    3       58,722       58,722       0  

Other

    5       21,492       21,492       0  
                                 

Totals

          $ 248,032     $ 203,916     $ 44,116  

  

 
F-14

 

  

CVD EQUIPMENT CORPORATION AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

December 31, 2013 and 2012

 

Note 6 – Intangible Assets (continued)

 

2012

Intangible Assets

 

Weighted Average

Amortization Period

   

Cost

   

Accumulated

Amortization

   

Carrying

Amount

 
                                 

Patents & Copyrights

    16     $ 46,692     $ 28,405     $ 18,287  

Intellectual Property

    15       100,000       76,673       23,327  

Licensing Agreement

    5       10,000       10,000       0  

Certifications

    3       58,722       58,722       0  

Other

    5       21,492       21,492       0  
                                 

Totals

          $ 236,906     $ 186,702     $ 41,614  

 

The estimated amortization expense related to intangible assets for each of the five succeeding fiscal years and thereafter as of December 31, 2013 is as follows:

 

 

Year Ended

       

2014

  $ 7,242  

2015

    7,008  

2016

    6,943  

2017

    3,504  

2018

    1,839  

Thereafter

    17,580  

 Total

  $ 44,116  

 

 

Note 7 – Financing Arrangements

 

On August 5, 2011, the Company entered into a $9.1 million credit agreement with HSBC Bank, USA, N.A., (“HSBC”), to replace its $5.0 million Revolving Credit Agreement and $2.1 million of existing mortgages previously held by Capital One Bank, N.A., which was secured by substantially all of the Company’s personal property. This new agreement consists of a $7 million revolving credit facility and a $2.1 million five (5) year term loan. The revolving credit facility permits the Company to borrow on a revolving basis until August 5, 2014. Interest on the unpaid principal balance on this facility accrues at either (i) the LIBOR Rate plus 1.75% or (ii) the bank’s prime rate minus 0.50%. The term loan was used to pay off the existing mortgages previously held by Capital One Bank, N.A. Interest on the unpaid principal balance accrues at a fixed rate of 3.045%. Borrowings under this term loan are collateralized by certain assets as defined under the agreement.

 

 
F-15

 

 

CVD EQUIPMENT CORPORATION AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

December 31, 2013 and 2012

 

Note 7 – Financing Arrangements (continued)

 

Effective as of March 15, 2012, we closed on the purchase of a 120,000 square foot facility located at 355 South Technology Drive, Central Islip, New York (the “Central Islip facility”) through the town of Islip Industrial Development Agency (Note 8). The purchase price for the Property was $7,200,000 exclusive of closing costs. Pursuant to the terms of an Accommodation Agreement, we entered into a loan agreement with HSBC Bank, in the amount of $6,000,000 (the “Loan”), proceeds of which were used to finance a portion of the purchase price on the Central Islip facility. The cash proceeds we received in from the sale of our previously owned headquarters were used to reduce this loan by $1,309,000. The Loan is secured by the mortgage against the Central Islip facility. Interest presently accrues on the Loan, at our option, at the variable rate of LIBOR plus 1.75% or HSBC’s prime rate minus 0.50%. This rate was 1.9166% on December 31, 2013 and the loan matures on March 1, 2022.

 

Note 8 – Long-term Debt

Long-term debt as of December 31 consists of the following:

     

2013

   

2012

 

HSBC BANK USA, NA

                 

$2,100,000 5 year term loan payable in monthly installments of $35,000 plus interest on the unpaid principal balance which accrues at a fixed rate of 3.045%. This term loan is secured by $1 million, provided that, so long as no event of default has occurred and is then continuing, HSBC will release $200,000 of the collateral on each anniversary of the closing date. On August 5, 2012 HSBC released $200,000, to reduce the collateral to $800,000. HSBC did not release any funds in 2013, as we were not in compliance with the terms of one of the covenants of the agreement.

    $ 1,120,000     $ 1,540,000  
                   

GENERAL ELECTRIC CAPITAL CORPORATION

                 

$2,700,000 Mortgage payable secured by real property, building and improvements at 1860 Smithtown Avenue, Ronkonkoma, NY pursuant to an installment sale agreement with the Town of Islip Industrial Development Agency; This amount was paid in full on April 5, 2013.

      -----       1,007,841  
                   

HSBC BANK USA, NA

                 

$6,000,000 Mortgage payable secured by real property Buildings and improvements at 355 South Technology Drive, Central Islip, NY payable in monthly principle installments of $25,000 plus interest. Interest presently accrues at our option, at the variable rate of LIBOR plus 1.75% or HSBC’s prime rate minus 0.50% The loan matures on March 1, 2022.

      4,165,508       5,775,000  

Totals

      5,285,508       8,322,841  

Less: Current maturities

      720,000       935,822  

Long-term debt

      4,565,508       7,387,019  

 

 
F-16

 

 

CVD EQUIPMENT CORPORATION AND SUBSIDIARIES

NOTES TO CONSOLIDATED FINANCIAL STATEMENTS

December 31, 2013 and 2012

 

Note 8 – Long-term Debt (continued)

 

Future maturities of long-term debt as of December 31, 2013 are as follows: 

 

2014

  $ 720,000  

2015

    720,000  

2016

    580,000  

2017

    300,000  

2018

    300,000  

Thereafter

    2,665,508  
    $ 5,285,508  

 

As of December 31, 2013, we were not in compliance with the terms of the covenants in both HSBC Bank, USA, N.A. loan agreements. We received waivers on the agreements.

 

Note 9 – Earnings per Share

 

The calculation of basic and diluted weighted average common shares outstanding is as follows:

 

   

2013

   

2012

 

Weighted average common shares outstanding basic earnings per share

    6,071,375       6,007,326  
                 

Effect of potential common share issuance:

               

Stock options

    -       124,911  
                 

Weighted average common shares outstanding