t68409_10k.htm


UNITED STATES
SECURITIES AND EXCHANGE COMMISSION
WASHINGTON, DC 20549
 
FORM 10-K
 
x ANNUAL REPORT PURSUANT TO SECTION 13 OR 15(D) OF THE SECURITIES
EXCHANGE ACT OF 1934
 
For the fiscal year ended March 31, 2010
 
o TRANSITION REPORT PURSUANT TO SECTION 13 OR 15(D) OF THE SECURITIES
EXCHANGE ACT OF 1934
 
For the transition period from __________ to __________
 
COMMISSION FILE NUMBER 0-17629
 
ADM TRONICS UNLIMITED, INC.
(Name of registrant as specified in its charter)
 
Delaware
22-1896032
(State or other jurisdiction of
(I.R.S. Employer Identification No.)
incorporation or organization)
 
 
224 Pegasus Avenue, Northvale, New Jersey 07647
(Address of Principal Executive Offices) (Zip Code)
 
Registrant’s telephone number (201) 767-6040
 
SECURITIES REGISTERED PURSUANT TO SECTION 12(B) OF THE ACT: None
 
SECURITIES REGISTERED PURSUANT TO SECTION 12(G) OF THE ACT:
 
COMMON STOCK, $.0005 PAR VALUE
(Title of Class)
 
Indicate by check mark if the registrant is a well-known seasoned issuer, as defined in Rule 405 of the Securities Act.  Yes o   No x
 
Indicate by check mark if the registrant is not required to file reports pursuant to Section 13 or Section 15(d) of the Act.  Yes o   No x
 
Indicate by check mark whether the registrant (1) has filed all reports required to be filed by Section 13 or 15(d) of the Securities Exchange Act of 1934 during the preceding 12 months (or for such shorter period that the registrant was required to file such reports), and (2) has been subject to such filing requirements for the past 90 days.  Yes x   No o
 
Indicate by check mark whether the registrant has submitted electronically and posted on its corporate Web site, if any, every Interactive Data File required to be submitted and posted pursuant to Rule 405 of Regulation S-T (§ 229.405 of this chapter) during the preceding 12 months (or for such shorter period that the registrant was required to submit and post such files). Yes o   No o
 
Indicate by check mark if disclosure of delinquent filers pursuant to Item 405 of Regulation S-K (§ 229.405 of this chapter) is not contained herein, and will not be contained, to the best of registrant’s knowledge, in definitive proxy or information statements incorporated by reference in Part III of this Form 10-K or any amendment to this Form 10-K. x
 
 
 

 
 
Indicate by check mark whether the registrant is a large accelerated filer, an accelerated filer, a non-accelerated filer, or a smaller reporting company. See the definitions of “large accelerated filer,” “accelerated filer” and “smaller reporting company” in Rule 12b-2 of the Exchange Act. (Check one):
 
Large accelerated filer o
 
Accelerated filer o
 
Non-accelerated filer o
(Do not check if a smaller reporting company)
 
Smaller reporting company x
 
Indicate by check mark whether the registrant is a shell company (as defined in Rule 12b-2 of the Act).  Yes o No x
 
The aggregate market value of voting stock held by non-affiliates of the registrant as of September 30, 2009, the last business day of the registrant’s most recently completed second fiscal quarter was $681,415.
 
The number of shares of the Common Stock outstanding as of June 29, 2010 was 53,939,537.
 
DOCUMENTS INCORPORATED BY REFERENCE
 
Not applicable.
  
FORWARD LOOKING STATEMENTS
 
This Annual Report on Form 10-K contains various forward-looking statements made pursuant to the safe harbor provisions of the Private Securities Litigation Reform Act of 1995 and information that is based on management’s beliefs as well as assumptions made by and information currently available to management. Although we believe that the expectations reflected in such forward-looking statements are reasonable, we can give no assurance that such expectations will prove to be correct. When used in this report, the words “anticipate,” “believe,” “estimate,” “expect,” “predict,” “project” and similar expressions are intended to identify forward-looking statements. We cannot guarantee the accuracy of the forward-looking statements, and you should be aware that our actual results could differ materially from those contained in the forward-looking statements due to a number of factors, including the statements under “Risk Factors” set forth in “Item 1 - Description of Business” and the statements under “Critical Accounting Policies” set forth in “Item 6 - Management’s Discussion and Analysis or Plan of Operation.” Due to these uncertainties and risks, readers are cautioned not to place undue reliance on these forward-looking statements, which speak only as of the date of this Annual Report on Form 10-K.
 
Unless otherwise indicated in this prospectus, references to “we,” “us,” “our” or the “Company” refer to ADM Tronics Unlimited, Inc. and its subsidiaries.
 
 
 

 
 
PART I
 
ITEM 1. BUSINESS
 
COMPANY OVERVIEW
 
The Company is a technology-based developer and manufacturer of diversified lines of products and derives revenue from the production and sale of environmentally safe chemical products for industrial, medical and cosmetic uses and electronics for non-invasive medical and other applications.
 
The Company is a corporation that was organized under the laws of the State of Delaware on November 24, 1969. Our operations are conducted through ADM Tronics Unlimited, Inc. (“ADM”) and its subsidiaries, Pegasus Laboratories, Inc. (“Pegasus”), Sonotron Medical Systems, Inc. (“SMI”)and Action Industries Unlimited LLC. (“Action”). As of June 29, 2010, ADM owned approximately 100%, 94% and 100% of the outstanding capital stock of Pegasus, SMI and Action, respectively. In addition, the Company owns a minority interest in Montvale Technologies Inc, (formerly known as Ivivi Technologies Inc.) (“ITI”), which until October 18, 2006 was operated as a subsidiary of the Company. ITI was deconsolidated as of October 18, 2006 upon the consummation of ITI’s initial public offering, as we no longer owned a majority of the outstanding common stock of ITI and do not control ITI’s operations, but can exert significant influence based on the percentage of ITI’s stock owned by us. As a result, our investment in ITI from October 18, 2006 through March 31, 2008 was reported under the equity method of accounting. Since April 1, 2008, we report our investment in ITI at fair value. As of June 29, 2010, we owned approximately 28.9% of the outstanding capital stock of ITI.  On February 12, 2010 substantially all of the assets of ITI were sold to Ivivi Health Sciences, LLC (“IHS”) an unaffiliated entity controlled by ITI’s former Chairman of the Board.  Concurrent with such asset sale, the Company entered into agreements with IHS for services related to engineering and regulatory matters, and the previous manufacturing agreement with ITI was assigned to IHS, as further discussed in footnote 15 to the financial statements.
 
COMPANY PRODUCTS
 
ENVIRONMENTALLY SAFE CHEMICAL PRODUCTS FOR INDUSTRIAL, COSMETIC AND TOPICAL USES
 
INDUSTRIAL
 
We develop, manufacture and sell chemical products to industrial users. Such products consist primarily of the following:
 
Water-based primers and adhesives;
Water-based coatings and resins;
Water-based chemical additives; and
Anti-static conductive paints, coating and other products.
 
Water-based primers and adhesives are chemical compounds used to bind different plastic films, metal foils and papers. Examples are the binding of polyethylene to polyester, nylon, vinyl, aluminum, paper and cellophane. Our water-based primers and adhesives are similar in function to solvent-based primers that are widely used to bind plastic films, papers and foils. Solvent-based systems have come under criticism since they have been found to be highly pollutant, dangerous to health and generally caustic in nature. Based upon our experience since 1969, including information furnished to us by certain of our customers, we believe that water-based systems have no known polluting effects and pose no known health hazards. There can, of course, be no assurance that any governmental restrictions will not be imposed on our water-based products or that such products will be accepted as replacements for solvent based products.
 
 
 

 
 
Coatings and resins for the printing industry are used to impart properties to the printed substrate. Our coatings and resins can be used to coat printed material for glossy or aesthetic appeal to make such material virtually impervious to certain types of grease and to impart other characteristics required or desired for various products and specifications.
 
Certain of our chemical additives are used to impart properties to inks and other chemical products used in the food packaging and printing industries.  These additives are used for their ability to improve the performance of such products.
 
On July 17, 2009, we purchased substantially all of the assets of Anti-static Industries of Delaware, Inc., which is now a division of ADM Tronics Unlimited, Inc.  Anti-static Industries of Delaware, Inc. was a company involved in the research, development and manufacture of water-based and proprietary electrically conductive paints, coatings and other products and accessories. Joseph Kaye, founder and former President of Anti-static Industries of Delaware, Inc., consults with us and continues research and development of conductive and antistatic technologies and products. We now develop and manufacture a full-line of anti-static products for commercial and industrial use through a division of our company that we refer to as “Anti-static Industries”. Antistatic Industries develops and distributes proprietary conductive paints, coatings and other products and accessories which can be used by computer, pharmaceutical and chemical companies to prevent, reduce or eliminate static electricity. Many industries are concerned with static electricity as it can be hazardous to personnel and damage corporate facilities, high-end computers, electronic equipment and valuable parts. Antistatic Industries has a wide range of products including paints, hoses, garments, floor mats, rugs, strapping, tapes, hook-and-loop, adhesive products  and many other specialized items; all with conductive properties.  Antistatic Industries has also pioneered low volatile organic compound conductive and antistatic paint and coating formulations that can be used as replacements for paints and coatings made from hazardous solvents. Antistatic Industries seeks to continually develop new products through its research and development department for new and current customers to aid in their quest for maximum protection with less waste and rejects in their manufacturing processes.
 
None of our chemical products are protected by patents, although the names of some of such products have been protected by trademarks. We do not believe that any such trademarks are material to our business. As of March 31, 2010, the dollar amount of backlog orders for our chemical products believed by us to be firm, was not material.
 
COSMETIC AND TOPICAL PRODUCTS
 
The Company, through its subsidiary, Pegasus, has developed several cosmetic and topical products. We have not realized any significant revenues from such products and there can be no assurance that any such products will account for significant revenues or any profits in the future.
 
Although we believe that our proposed products can be successfully marketed for over-the-counter use through one or more entities representing numerous retail pharmacies and otherwise, there can be no assurance that sales of such products will be material or that we will be able to derive any profits there from.
 
 
 

 
 
NON-INVASIVE ELECTRONIC MEDICAL AND OTHER DEVICES
 
CONTRACT MANUFACTURING
 
The Company derives revenues from contract manufacturing of electronic medical and other devices for its affiliate ITI, IHS and other customers.  During the year ended March 31, 2010, revenues from ITI and IHS contract manufacturing were approximately $62,307 and $11,784, respectively, or collectively, 6% of total revenues, down from approximately $564,008 from ITI, or 38% of total revenues during the year ended March 31, 2009.
 
SONOTRON TECHNOLOGY
 
SMI, a majority-owned subsidiary of ADM, has developed a technology, known as the Sonotron Technology, to treat subjects suffering from the pain of inflammatory joint conditions. Although some of the devices utilizing this technology are commercially available for the treatment of animals, none of such devices have received clearance from the U.S. Food and Drug Administration (the “FDA”) for human application in the United States. Pursuant to a manufacturing agreement, the Company is the exclusive manufacturer of the Sonotron devices.
 
The Sonotron Technology is the subject of three United States patents (the “Sonotron Patents”), which expire in 2011, 2012 and 2016.
 
As of March 31, 2010, the dollar amount of backlog orders for Sonotron Devices was not material.
 
ACTION
 
On August 27, 2008, we acquired substantially all of the assets of Action Spas, a manufacturer of electronic controllers for spas and hot tubs, under our wholly-owned subsidiary Action.  We acquired Action to continue to expand our electronics segment operations, and for the opportunity to expand our operations into the OEM market. During the fiscal years ended March 31, 2010 and 2009, Action Spas had revenues of $25,103 and $41,531, respectively.
 
WELLINGTON
 
During the three months ended June 30, 2009, we invested in Wellington Scientific, LLC (“Wellington”) which has rights to an electronic uroflowmetry diagnostic medical device technology.  These products are currently distributed in South Africa, but are not compliant with US FDA requirements for distribution in the US. We have commenced making modifications to the design of these products for compliance with FDA standards and create the required documentation for distribution of these products in the US.  We invested a total of $50,000, with $10,000 provided in cash, and $40,000 in services provided to Wellington. On June 4, 2009, Wellington issued a secured convertible note to us for a principal amount of $50,000 with an interest rate of 10%.  In addition, we shall be the exclusive manufacturer of these products for Wellington, pursuant to an agreement, and shall receive a percentage of future sales, if any. To date there have been no sales of these electronic uroflowmetry diagnostic medical devices.
 
CUSTOMERS
 
During our fiscal years ended March 31, 2010 and 2009, sales of chemical products accounted for approximately 76% and 52% of our operating revenues, respectively; sales and manufacturing charges for electronic products accounted for approximately 24%, and 48% of our operating revenues, respectively; and sales of our cosmetic and topical dermatological products were de minimis.
 
 
 

 
 
During the year ended March 31, 2010, three customers accounted for 50% of ADM’s revenue. During the fiscal year ended March 31, 2009, two customers accounted for 54% of ADM’s revenue. As of March 31, 2010, two customers represented 65% of our accounts receivable. As of March 31, 2009, two customers represented 67% of our accounts receivable. The loss of these major customers could have a material impact on our operations and cash flow.
 
MARKETING AND DISTRIBUTION
 
A majority of ADM’s chemical product sales are distributed to customers directly from ADM’s headquarters. Customers place purchase orders with the Company and chemical products are then shipped via common carrier truck delivery on an “FOB shipping point” basis. A portion of the sales are accomplished through distributors who place purchase orders with ADM for certain quantities of its chemical products which are shipped by common carrier to their respective warehouses. These stocking distributors then ship product to the ultimate customer via common carrier from their inventory of ADM’s chemical products.
 
MANUFACTURER AND SUPPLIERS
 
MANUFACTURER
 
ADM manufactures its chemical products and SMI’s, Action’s and IHS’s electronic products at its facilities located in Northvale, New Jersey.
 
ADM, SMI and ITI (through February 12, 2010 and IHS subsequently, which was assigned the manufacturing agreement from ITI) are parties to  manufacturing agreements, pursuant to which ADM serves as the exclusive manufacturer of all current and future medical, non-medical electronic and other devices or products to be produced by such entities. Pursuant to the terms of the manufacturing agreement, for each product that ADM manufactures for the entity, the entity pays ADM an amount equal to 120% of the sum of (i) the actual, invoiced cost for raw materials, parts, components or other physical items that are used in the manufacture of the product and actually purchased for the entity by the Company, if any, plus (ii) a labor charge based on ADM’s standard hourly manufacturing labor rate.
 
ADM warranties the products it manufactures for SMI and IHS against defects in material and workmanship for a period of 90 days after the completion of manufacture. After such 90-day period, ADM has agreed to provide repair services for the products to the entity at its customary hourly repair rate plus the cost of any parts, components or items necessary to repair the products unless the entity provides such parts, components or items to ADM.
 
Under the manufacturing agreement, all inventions, patentable or otherwise, trade secrets, discoveries, ideas, writings, technology, know-how, improvements or other advances or findings relating to the entities’ products and technologies shall be and become the exclusive proprietary and confidential information of such entity or any person to whom such entity may have assigned rights therein. The Company has no rights in any such proprietary or confidential information and is prohibited from using or disclosing any of such proprietary or confidential information for its own benefit or purposes, or for the benefit or purpose of any other person other than the entity without such entity’s prior written consent.
 
 
 

 
 
ADM has also agreed to cooperate with each entity in securing for it any patents, copyrights, trademarks or the like which it may seek to obtain in connection therewith. If ADM breaches any of the confidentiality agreements contained in the manufacturing agreement, or if these agreements are not sufficient to protect the entity’s technology or are found to be unenforceable, the entity’s competitors could acquire and use information that it considers to be our trade secrets and the entity may not be able to compete effectively. Since ADM is the exclusive manufacturer of all of SMI’s and IHS’s current and future products under the manufacturing agreement, if the operations of ADM are interrupted or if orders or orders of other customers of the Company exceed our manufacturing capabilities, we may not be able to deliver products on time and the entities may not be able to deliver their respective products to their respective customers on time. Under the terms of the manufacturing agreement, if ADM is unable to perform its obligations thereunder or is otherwise in breach of any provision thereof, the entities have the right, without penalty, to engage third parties to manufacture some or all of their products. In addition, if an entity elects to utilize a third-party manufacturer to supplement the manufacturing being completed by ADM, such entity has the right to require us to accept delivery of the products from these third-party manufacturers, finalize the manufacture of the products to the extent necessary for such entity to comply with FDA regulations and ensure that the design, testing, control, documentation and other quality assurance procedures during all aspects of the manufacturing process have been met.
 
As the exclusive manufacturer of the medical devices of SMI and IHS, ADM is required to comply with quality requirements, which require manufacturers,
including third-party manufacturers, to follow stringent design, testing, control, documentation and other quality assurance procedures during all aspects of the manufacturing process. In addition, our manufacturing facility is required to be registered as a medical device manufacturing facility with the FDA and is subject to inspection by the FDA. The Company has been registered by the FDA as a Registered Medical Device Establishment since 1988 allowing it to manufacture medical devices in accordance with procedures outlined in FDA regulations, which include quality control and related activities. Such registration is renewable annually and although we do not believe that the registration will fail to be renewed by the FDA, there can be no assurance of such renewal. Our failure to obtain any annual renewal would have a material adverse effect on the entities if they were not able to secure another manufacturer of their products.
 
SUPPLIERS
 
ADM purchases the raw materials used in the manufacture of its chemical products from numerous sources. We believe that all necessary raw materials for our chemical products are readily available and will continue to be so in the foreseeable future. We have never had, nor do we anticipate experiencing, any shortages of such materials. The raw materials for chemical products consist primarily of water, resins, elastomers and catalysts. We generally maintain sufficient quantities of inventories of our chemical products to meet customer demands. When orders are received by us for our chemical products, our customers require immediate shipment thereof. Accordingly, in order to satisfy its customers’ needs, we have maintained an inventory ranging, in dollar amounts, from 15% to 30% of sales of chemical products in the form of either raw materials or finished goods.
 
 
 

 
 
We purchase the raw materials, parts, components and other items that are required to manufacture products for SMI, Action and IHS. We rely on a limited number of suppliers for such raw materials, parts, components and other items. Although there are many suppliers for each of these raw materials, parts, components and other items, we are dependent on a limited number of suppliers for many of the significant raw materials and components due to our customers’ requirements. We do not have any long-term or exclusive purchase commitments with any of our  suppliers. The failure to maintain existing relationships with suppliers or to establish new relationships in the future could also negatively affect our ability to obtain raw materials and components used in the products in a timely manner. If we are unable to obtain ample supply of product from our existing suppliers or alternative sources of supply, we may be unable to satisfy SMI’s, Actions and IHS’s orders which could reduce our revenues and adversely affect their relationships with their customers.
 
RESEARCH AND DEVELOPMENT
 
During our fiscal years ended March 31, 2010 and 2009, research and development expenses with respect to company-sponsored research and development activities relating to our chemical business were approximately $27,995 and $0, respectively. During such fiscal years, we did not expend any funds on customer-sponsored research and development activities with respect thereto.
 
During our fiscal years ended March 31, 2010 and 2009, other than the regular compensation paid by us to our executive officers, we did not spend any appreciable amounts on testing, application, clinical studies and company-sponsored research and development activities in connection with the Sonotron Technology and other activities determined in accordance with generally accepted accounting principles. During each of such years no material amounts were spent on customer-sponsored research and development activities relating to the development of new products, services or techniques or the improvement of any of the foregoing.
 
During our fiscal years ended March 31, 2010 and 2009, we made no material expenditures with respect to company-sponsored research and development activities relating to our medical device business, with the exception of minimal unreimbursed R&D expense in the amount of $232 for our uroflowmetry device related to our agreement with Wellington Scientific.
 
COMPETITION
 
Our chemical business is highly competitive and substantially all of our competitors possess greater experience, financial resources, operating history and marketing capabilities than do we. Although we do not believe that there are one or more dominant competitors in such industry, there can be no assurance that we will be able to effectively compete with any or all of our competitors on the basis of price, service or otherwise. Competitors may be better able to withstand a change in conditions within the chemical products industry and throughout the economy as a whole. In addition, current and anticipated future consolidation among our competitors and customers may cause us to lose market share as well as put downward pressure on pricing. Furthermore, there is a trend in the chemical industry toward relocation of manufacturing facilities to lower-cost regions such as Asia. Such relocation may permit some of our competitors to lower their costs and improve their competitive position. If we do not compete successfully, our business, operating margins, financial condition, cash flows and profitability could be adversely affected.
 
 
 

 
 
Our results of operations depend, in part, on our ability to expand our chemical product offerings. We are committed to remaining a competitive producer and believe that our portfolio of new or re-engineered products is strong. However, we may not be able to develop new products, re-engineer existing products successfully or bring them to market in a timely manner. While we believe that the products, pricing and services we offer customers are competitive, we may not be able to continue to attract and retain customers to which to we sell our chemical products.
 
INSURANCE
 
The Company may be exposed to potential product liability claims by those who use our products. Therefore, we maintain a general liability insurance policy, which includes aggregate product liability coverage of $7,000,000 for certain of our products. We believe that our present insurance coverage is adequate for the types of products currently marketed. There can be no assurance, however, that such insurance will be sufficient to cover potential claims or that the present level of coverage will be available in the future at a reasonable cost.
 
EMPLOYEES
 
As of June 29, 2010, we had 15 full-time employees. As of such date, we had one salaried employee in an executive or managerial position.
 
ITEM 1A.   RISK FACTORS
 
An investment in our stock involves a high degree of risk. You should carefully consider the following information, together with other information in this annual report, before buying shares of our stock. If any of the following risks or uncertainties occur, our business, financial condition and results of operations could be materially and adversely affected, the trading price of our stock could decline and you may lose all or a part of the money you paid to buy our stock.
 
RISKS RELATING TO OUR CHEMICAL BUSINESS
 
NEW ENVIRONMENTAL OR OTHER REGULATIONS COULD INCREASE THE COMPANY’S OPERATING COSTS.
 
Like other manufacturers, the Company is subject to a broad range of Federal, state and local laws and requirements, including those governing discharges in the air and water, the handling and disposal of solid and hazardous substances and wastes, the remediation of contamination associated with the release of hazardous substances, work place safety and equal employment opportunities. We have made expenditures to comply with such laws and requirements. We believe, based on information currently available to management, that we are in compliance with applicable environmental and other legal requirements and that we will not require material capital expenditures to maintain compliance with such requirements in the foreseeable future. Governmental authorities have the power to enforce compliance with such laws and regulations, and violators may be subject to penalties, injunctions or both. Third parties may also have the right to enforce compliance with such laws and regulations. As ADM develops new formulations for its chemical products, those products may become subject to additional review and approval requirements governing the sale and use of its products. Although our manufacturing processes do not currently result in the generation of hazardous wastes, this may not always be the case and material costs or liabilities may be incurred by us in the future as a result of the manufacturing operations. It is also possible that other developments, such as additional or increasingly strict requirements of laws and regulations of these types, or enforcement policies there under, could significantly increase our costs of operations.
 
 
 

 
 
BECAUSE WE USE VARIOUS MATERIALS AND SUBSTANCES IN MANUFACTURING OUR CHEMICAL PRODUCTS, OUR PRODUCTION FACILITIES ARE SUBJECT TO OPERATING HAZARDS THAT COULD CAUSE PERSONAL INJURY AND LOSS OF LIFE, SEVERE DAMAGE TO, OR DESTRUCTION OF, PROPERTY AND EQUIPMENT AND ENVIRONMENTAL CONTAMINATION.
 
We are dependent on the continued operation of our production and distribution facility. This facility is subject to hazards associated with the manufacture, handling, storage and transportation of chemical materials and products, including natural disasters, mechanical failure, unscheduled downtime, labor difficulties, transportation interruptions, and environmental hazards, such as spills, discharges or releases of toxic or hazardous substances and remediation complications. These hazards can cause personal injury and loss of life, severe damage to, or destruction of, property and equipment and environmental contamination and other environmental damage and could have a material adverse effect on our financial condition. In addition, due to the nature of our business operations, we could become subject to scrutiny from environmental action groups.
 
WE RELY SIGNIFICANTLY ON RAW MATERIALS IN THE PRODUCTION OF OUR CHEMICAL PRODUCTS AND FLUCTUATIONS IN COSTS OF SUCH RAW MATERIALS WOULD INCREASE OUR OPERATING EXPENSES.
 
Our manufacturing operations with respect to our chemical products depend upon obtaining adequate supplies of our raw materials on a timely basis. The loss of a key source of supply or a delay in shipments could have an adverse effect on our business. We are exposed to price risks associated with these raw material purchases. The availability and prices of raw materials may be subject to curtailment or change due to, among other things, new laws or regulations, suppliers’ allocations to other purchasers, interruptions in production by suppliers, changes in exchange rates, cost components of raw materials and worldwide price levels. Our results of operations could be adversely affected if we are unable to obtain adequate supplies of raw materials in a timely manner or if the costs of raw materials increased significantly.
 
WE FACE COMPETITION FROM OTHER CHEMICAL COMPANIES, WHICH COULD ADVERSELY AFFECT OUR REVENUE AND FINANCIAL CONDITION.
 
We actively compete with companies producing the same or similar products and, in some instances, with companies producing different products designed for the same uses. We encounter competition in price, delivery, service, performance, product innovation and product recognition and quality, depending on the product involved. For some of our products, our competitors are larger and have greater financial resources. As a result, these competitors may be better able to withstand a change in conditions within the industries in which we operate, a change in the prices of raw materials or a change in the economy as a whole. Our competitors can be expected to continue to develop and introduce new and enhanced products, which could cause a decline in market acceptance of our chemical products. Current and future consolidation among our competitors and customers may also cause a loss of market share as well as put downward pressure on pricing. Our competitors could cause a reduction in the prices for some of our chemical products as a result of intensified price competition. Competitive pressures can also result in the loss of major customers. If we cannot compete successfully, our business, financial condition and results of operations could be adversely affected.
 
 
 

 
 
WE FACE COMPETITION FROM OTHER CHEMICAL COMPANIES, WHICH COULD FORCE US TO LOWER OUR PRICES THEREBY ADVERSELY AFFECTING OUR OPERATING MARGINS, FINANCIAL CONDITION, CASH FLOWS AND PROFITABILITY.
 
The markets in which we operate are highly competitive, and this competition could harm our business, results of operations, cash flow and financial condition. Our competitors include major international producers as well as smaller regional competitors. We believe that a significant competitive factor for our products is selling price. We could be subject to adverse results caused by our competitors’ pricing decisions. In addition, current and possible future consolidation among our competitors and customers may cause us to lose market share as well as put downward pressure on pricing. Furthermore, there is a trend in the chemical industry toward relocation of manufacturing facilities to lower-cost regions. Such relocation may permit some of our competitors to lower their costs and improve their competitive position. Some of our competitors are larger, have greater financial resources and have less debt than we do. As a result, those competitors may be better able to withstand a change in conditions within our industry and throughout the economy as a whole. If we do not compete successfully, our business, operating margins, financial condition, cash flows and profitability could be adversely affected.
 
FAILURE TO DEVELOP NEW CHEMICAL PRODUCTS AND/OR IMPROVE OUR EXISTING PRODUCTS WILL MAKE US LESS COMPETITIVE.
 
Our results of operations depend, in part, on our ability to expand our chemical product offerings. We are committed to remaining a competitive producer and believe that our portfolio of new or re-engineered products is strong. However, we may not be able to continue to develop new products, re-engineer our existing products successfully or bring them to market in a timely manner. While we believe that the products, pricing and services we offer customers are competitive, we may not be able to continue to attract and retain customers to which to sell our chemical products.
 
FAILURE TO MAKE CONTINUED IMPROVEMENTS IN OUR PRODUCTIVITY COULD HURT OUR COMPETITIVE POSITION.
 
In order to obtain and maintain a competitive position, we believe that we must continue to make improvements in our productivity. When we invest in new technologies or processes, we face risks related to cost overruns and unanticipated technical difficulties. Our inability to anticipate, respond to or utilize changing technologies could have a material adverse effect on our business and our results of operations.
 
CHANGES IN OUR CUSTOMERS’ PRODUCTS COULD REDUCE THE DEMAND FOR OUR CHEMICAL PRODUCTS, WHICH MAY DECREASE OUR NET SALES AND OPERATING MARGINS.
 
Our chemical products are used for a broad range of applications by our customers. Changes, including technological changes, in our customers’ products or processes may make our chemical products unnecessary, which would reduce the demand for those products. Other customers may find alternative materials or processes that no longer require our products. If the demand for our chemical products is reduced, our net sales and operating margins may be reduced as well.
 
 
 

 
 
WE HAVE FEW PROPRIETARY RIGHTS WITH RESPECT TO OUR CHEMICAL PRODUCTS, THE LACK OF WHICH MAY MAKE IT EASIER FOR OUR COMPETITORS TO COMPETE AGAINST US.
 
None of our chemical products are protected by patents. We do attempt to protect the names of some of our chemical products through trademarks and some of our other limited proprietary property through trade secret, nondisclosure and confidentiality measures; however, such protections may not preclude competitors from developing similar technologies.
 
RISKS RELATING TO OUR ELECTRONICS BUSINESS
 
SMI, ACTION AND IHS OUTSOURCE THE MANUFACTURING OF THEIR PRODUCTS TO US AND IF OUR OPERATIONS ARE INTERRUPTED OR IF OUR ORDERS EXCEED OUR MANUFACTURING CAPABILITIES, THEY MAY NOT BE ABLE TO DELIVER THEIR PRODUCTS TO CUSTOMERS ON TIME.
 
Pursuant to individual manufacturing agreements between SMI, IHS and us, we are the exclusive manufacturer of the products of SMI and IHS. We also manufacture all of the electronic products sold by Action.  We operate a single facility and have limited capacity that may be inadequate if SMI’s, Action’s or IHS’s customers place orders for unexpectedly large quantities of their products, or if our other customers place large orders of products, which could limit our ability to produce the products of SMI, Action or IHS. In addition, if our operations were halted or restricted, even temporarily, or we are unable to fulfill large orders, SMI, Action and IHS could experience business interruption, increased costs, damage to their reputations and loss of their customers. Although SMI and IHS have the right to utilize other manufacturers if we are unable to perform under our agreement, manufacturers of their products need to be licensed with the FDA, and identifying and qualifying a new manufacturer to replace us as the manufacturer of their products could take several months during which time, they would likely lose customers and our revenues could be materially delayed and/or reduced. In addition, our failure to produce such products could result in claims against us. See “Item 1. Business - Manufacturer and Suppliers.”
 
WE DEPEND ON A LIMITED NUMBER OF SUPPLIERS FOR THE COMPONENTS AND RAW MATERIALS USED IN OUR PRODUCTS AND THE PRODUCTS MANUFACTURED FOR THIRD PARTIES, INCLUDING SMI AND IHS, AND ANY INTERRUPTION IN THE AVAILABILITY OF THESE COMPONENTS AND RAW MATERIALS COULD REDUCE OUR REVENUE.
 
We rely on a limited number of suppliers for the components and raw materials used in the products that we manufacture for others, including SMI, Action and IHS. Although there are many suppliers for each of their component parts and raw materials, we are dependent on a single or limited number of suppliers for many of the significant components and raw materials due to our customers’ specifications. This reliance involves a number of significant risks, including:
 
unavailability of materials and interruptions in delivery of components and raw materials from suppliers;
manufacturing delays caused by such unavailability or interruptions in delivery; and
fluctuations in the quality and the price of components and raw materials.
 
We do not have any long-term or exclusive purchase commitments with any of our suppliers. Failure to maintain existing relationships with suppliers or to establish new relationships in the future could also negatively affect our ability to obtain components and raw materials used in these products in a timely manner. If we are unable to obtain ample supply of product from existing suppliers or alternative sources of supply, we may be unable to satisfy our customers’ orders which could reduce our revenues and adversely affect our relationships with these customers. See “Item 1. Business - Manufacturers and Suppliers.”
 
 
 

 
 
OUR ABILITY TO EXECUTE OUR BUSINESS PLAN DEPENDS ON THE SCOPE OF OUR INTELLECTUAL PROPERTY RIGHTS AND NOT INFRINGING THE INTELLECTUAL PROPERTY RIGHTS OF OTHERS. THE VALIDITY, ENFORCEABILITY AND COMMERCIAL VALUE OF THESE RIGHTS ARE HIGHLY UNCERTAIN.
 
Our ability to compete effectively with other companies is materially dependent upon the proprietary nature of our technologies. We rely primarily on patents and trade secrets to protect our medical device technologies.
 
Third parties may seek to challenge, invalidate, circumvent or render unenforceable any patents or proprietary rights owned by us based on, among other things:
 
subsequently discovered prior art;
lack of entitlement to the priority of an earlier, related application; or
failure to comply with the written description, best mode, enablement or other applicable requirements.
 
In general, the patent position of medical device companies are highly uncertain, still evolving and involve complex legal, scientific and factual questions. We are at risk that:
 
other patents may be granted with respect to the patent applications filed by us; and
any patents issued to us may not provide commercial benefit to us or will be infringed, invalidated or circumvented by others.
 
The United States Patent and Trademark Office currently has a significant backlog of patent applications, and the approval or rejection of patents may take several years. Prior to actual issuance, the contents of United States patent applications are generally published 18 months after filing. Once issued, such a patent would constitute prior art from its filing date, which might predate the date of a patent application on which we rely. Conceivably, the issuance of such a prior art patent, or the discovery of “prior art” of which we are currently unaware, could invalidate a patent of ours or prevent commercialization of a product claimed thereby.
 
Although we generally conduct a cursory review of issued patents prior to engaging in research or development activities, we may be required to obtain a license from others to commercialize any of our new products under development. If patents that cover our existing or new products are issued to other companies, there can be no assurance that any necessary license could be obtained on favorable terms or at all.
 
There can be no assurance that we will not be required to resort to litigation to protect our patented technologies and other proprietary rights or that we will not be the subject of additional patent litigation to defend our existing and proposed products and processes against claims of patent infringement or any other intellectual property claims. Such litigation could result in substantial costs, diversion of management’s attention, and diversion of our resources.
 
 
 

 
 
We also have applied for patent protection in several foreign countries. Because of the differences in patent laws and laws concerning proprietary rights between the United States and foreign countries, the extent of protection provided by patents and proprietary rights granted to us by the United States may differ from the protection provided by patents and proprietary rights granted to us by foreign countries.
 
We attempt to protect our trade secrets, including the processes, concepts, ideas and documentation associated with our technologies, through the use of confidentiality agreements and non-competition agreements with our current employees, and with other parties to whom we have divulged such trade secrets with the exception of our CEO, Andre DiMino. If our employees or other parties breach our confidentiality agreements and non-competition agreements or if these agreements are not sufficient to protect our technology or are found to be unenforceable, our competitors could acquire and use information that we consider to be our trade secrets and we may not be able to compete effectively. Most of our competitors have substantially greater financial, marketing, technical and manufacturing resources than we have and we may not be profitable if our competitors are also able to take advantage of our trade secrets.
 
We may decide for business reasons to retain certain knowledge that we consider proprietary as confidential and elect to protect such information as a trade secret, as business confidential information or as know-how. In that event, we must rely upon trade secrets, know-how, confidentiality and non-disclosure agreements and continuing technological innovation to maintain our competitive position. There can be no assurance that others will not independently develop substantially equivalent proprietary information or otherwise gain access to or disclose such information.
 
IF THE FDA OR OTHER STATE OR FOREIGN AGENCIES IMPOSE REGULATIONS THAT AFFECT OUR MEDICAL DEVICE PRODUCTS, OUR DEVELOPMENT, MANUFACTURING AND MARKETING COSTS WILL BE INCREASED.
 
The testing and production of medical devices are subject to regulation by the FDA as devices under the 1976 Medical Device Amendments to the Federal Food, Drug and Cosmetic Act. In the United States, medical devices must be:
 
manufactured in registered and quality approved establishments by the FDA; and
produced in accordance with the FDA Quality System Regulation (“QSR”) for medical devices.
 
As a result we, as the manufacturer of other parties’ devices, are required to comply with QSR requirements and if we fail to comply with these requirements, these other third parties will need to find another company to manufacture its devices. In addition, the Company’s manufacturing facility:
 
is required to be registered as a medical device manufacturing facility with the FDA; and
is subject to inspection by the FDA.
 
The FDA can impose civil and criminal enforcement actions and other penalties on us if we fail to comply with stringent FDA regulations.
 
 
 

 
 
Medical device manufacturing facilities must maintain records, which are available for FDA inspectors documenting that the appropriate manufacturing procedures were followed. The FDA has authority to conduct inspections of our facility. Labeling and promotional activities are also subject to scrutiny by the FDA and, in certain instances, by the Federal Trade Commission. Any failure by us or the manufacturer of our products to take satisfactory corrective action in response to an adverse inspection or to comply with applicable FDA regulations could result in enforcement action against us or our manufacturer, including a public warning letter, a shutdown of manufacturing operations, a recall of our products, civil or criminal penalties or other sanctions. From time to time, the FDA may modify such requirements, imposing additional or different requirements which may require us to alter our business methods which could result in increased expenses.
 
RISKS RELATED TO OUR COMPANY
 
WE HAVE A HISTORY OF SIGNIFICANT AND CONTINUED OPERATING LOSSES AND A SUBSTANTIAL ACCUMULATED EARNINGS DEFICIT AND WE MAY CONTINUE TO INCUR SIGNIFICANT LOSSES.
 
We have incurred substantial net losses of approximately $1.2 million and $8.9 million for the fiscal years ended March 31, 2010 and 2009, respectively. At March 31, 2010, we had an accumulated deficit of $31 million. We expect to incur additional operating losses, as well as negative cash flow from operations, for the foreseeable future.
 
The loss or significant reduction in business of any of our key customers could materially and adversely affect our revenues and earnings.
 
We are highly dependent upon certain customers to generate our revenues. For the fiscal year ended March 31, 2010, three customers accounted for 50% of revenue and for the fiscal year ended March 31, 2009, two customers accounted 54% of our revenues. All customer purchases are made through purchase orders and we do not have any long-term contracts with customers.  The complete loss of, or significant reduction in business from, or a material adverse change in the financial condition of, any of such customers will cause a material and adverse change in our revenues and operating results.
 
WE MAY BE EXPOSED TO POTENTIAL RISKS RELATING TO OUR INTERNAL CONTROL OVER FINANCIAL REPORTING AND OUR ABILITY TO HAVE THE OPERATING EFFECTIVENESS OF OUR INTERNAL CONTROLS ATTESTED TO BY OUR INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM.
 
As directed by Section 404 of the Sarbanes-Oxley Act of 2002 (“Section 404”) the Securities and Exchange Commission (“SEC”) adopted rules requiring public companies to include a report of management on the company’s internal control over financial reporting in their annual reports on Form 10-K. A report of our management is included in our Annual Report on Form 10-K. In addition, Section 404 requires the independent registered public accounting firm auditing a company’s financial statements to also attest to and report on the operating effectiveness of such company’s internal control over financial reporting commencing with our annual report for the fiscal year ending March 31, 2011. We can provide no assurance that we will be able to comply with all of the requirements imposed thereby. There can be no assurance that we will receive a positive attestation from our independent registered public accounting firm. In the event we identify significant deficiencies or material weaknesses in our internal control over financial reporting that we cannot remediate in a timely manner or we are unable to receive a positive attestation from our independent registered public accountants with respect to our internal control over financial reporting, investors and others may lose confidence in the reliability of our financial statements.
 
 
 

 
 
WE MAY BE EXPOSED TO PRODUCT LIABILITY CLAIMS FOR WHICH OUR INSURANCE MAY BE INADEQUATE.
 
Our business exposes us to potential product liability risks, which are inherent in the testing, manufacturing and marketing of chemical products and electronic devices. Although we maintain a general liability insurance policy, which includes aggregate product liability coverage of $7,000,000 for certain of our products, there can be no assurance, that such insurance will be sufficient to cover potential claims or that the present level of coverage will be available in the future at a reasonable cost.
 
While we are not aware of side-effects resulting from the use of any of our products, there may be unknown long-term effects of their use that may result in product liability claims in the future. Further, we cannot provide any assurance that:
 
our insurance will provide adequate coverage against potential liabilities if a product causes harm or fails to perform as promised;
adequate product liability insurance will continue to be available in the future; or
our insurance can be maintained on acceptable terms.
   
The obligation to pay any product liability claim in excess of whatever insurance we are able to obtain would increase our expenses and could greatly reduce our assets. See “Item 1. Business - Insurance.”
 
THE LOSS OF ANY OF OUR EXECUTIVE OFFICER OR KEY PERSONNEL MAY ADVERSELY AFFECT OUR OPERATIONS AND OUR ABILITY TO EXECUTE OUR GROWTH STRATEGY.
 
Our ability to execute our business plan depends upon the continued services of Andre’ DiMino, our President and Chief Executive Officer, as well as our key technology, marketing, sales and support personnel. We do not have employment or consulting agreements containing non-compete agreements with Mr. DiMino and certain of our key personnel, and we may not be able to retain these individuals. If we lost the services of Mr. DiMino or our key personnel, our business may be adversely affected and our stock price may decline. In addition, our ability to execute our business plan is dependent on our ability to attract and retain additional highly skilled personnel.
 
OUR EXECUTIVE OFFICER AND DIRECTORS AND ENTITIES AFFILIATED WITH THEM HAVE SUBSTANTIAL CONTROL OVER US, WHICH COULD DELAY OR PREVENT A CHANGE IN OUR CORPORATE CONTROL FAVORED BY OUR OTHER SHAREHOLDERS.
 
Our executive officer and directors and entities affiliated with them may be deemed to beneficially own, in the aggregate, approximately 38.8% of our outstanding common stock. In particular, Mr. DiMino, together with members of the DiMino family, may be deemed to beneficially own approximately 35.1% of the outstanding shares of our common stock. The interests of our current officer and director shareholders may differ from the interests of our other shareholders. As a result, the current officers and directors would have the ability to exercise substantial control over all corporate actions requiring shareholder approval, irrespective of how our other shareholders may vote, including the following actions:
 
the election of directors;
adoption of stock option plans;
the amendment of charter documents; or
the approval of certain mergers and other significant corporate transactions, including a sale of substantially all of our assets.
 
 
 

 
 
PENNY STOCK REGULATIONS MAY IMPOSE CERTAIN RESTRICTIONS ON MARKETABILITY OF OUR SECURITIES.
 
Our common stock is subject to penny stock rules, which may discourage broker-dealers from effecting transactions in our common stock or affect their ability to sell our securities. As a result, purchasers and current holders of our securities could find it more difficult to sell their securities. Our stock is traded on the OTC Bulletin Board. Trading volume of OTC Bulletin Board stocks have been historically lower and more volatile then stocks traded on an exchange or the Nasdaq Stock Market. In addition we may be subject to rules of the Securities and Exchange Commission that impose additional requirements on broker-dealers when selling penny stocks to persons other than established customers and accredited investors. In general, an accredited investor is a person with assets in excess of $1,000,000 or annual income exceeding $200,000 individually, or $300,000 together with his or her spouse. The relevant Securities Exchange Commission regulations generally define penny stocks to include any equity security not traded on an exchange or the Nasdaq Stock Market with a market price (as defined in the regulations) of less than $5 per share. Under the penny stock regulations, a broker-dealer must make a special suitability determination as to the purchaser and must have the purchaser’s prior written consent to the transaction. Prior to any transaction in a penny stock covered by these rules, a broker-dealer must deliver a disclosure schedule about the penny stock market prepared by the Securities Exchange Commission. Broker-dealers must also make disclosure concerning commissions payable to both the broker-dealer and any registered representative and provide current quotations for the securities. Finally, broker-dealers are required to send monthly statements disclosing recent price information for the penny stock held in an account and information on the limited market in penny stocks.
 
OUR STOCK PRICE, LIKE THAT OF MANY SMALL COMPANIES, HAS BEEN AND MAY CONTINUE TO BE VOLATILE.
 
We expect that the market price of our common stock will fluctuate as a result of variations in our quarterly operating results and other factors beyond our control. These fluctuations may be exaggerated if the trading volume of our common stock is low.
 
WE HAVE NOT PAID DIVIDENDS IN THE PAST AND DO NOT EXPECT TO PAY DIVIDENDS IN THE FUTURE, AND ANY RETURN ON INVESTMENT MAY BE LIMITED TO THE VALUE OF YOUR STOCK.
 
We have never paid any cash dividends on our common stock and do not anticipate paying any cash dividends on our common stock in the foreseeable future and any return on investment may be limited to the value of your stock. We plan to retain any future earnings to finance growth.
 
ITEM 1B. UNRESOLVED STAFF COMMENTS
 
Not applicable
 
 
 

 
 
ITEM 2. PROPERTIES
 
We are headquartered at 224 Pegasus Avenue, Northvale, New Jersey. We lease approximately 16,000 square feet of combined office and warehouse space from an unaffiliated third party with a monthly rent of $8,073 subject to annual increases.  The lease expires in June, 2018.  The Company, its subsidiaries and IHS utilize portions of the leased space. Pursuant to a management services agreement to which the Company, its subsidiaries and IHS are parties, the Company determines, on a monthly basis, the portion of space utilized by each entity during such month, and each entity reimburses the Company for their portion of the lease costs, real property taxes and related costs.
 
We believe that our existing facilities are suitable as office, storage, laboratory and manufacturing space, and are adequate to meet our current needs. We further believe that such properties are adequately covered by insurance.
 
We do not own any real property for use in our operations or otherwise.
 
ITEM 3. LEGAL PROCEEDINGS
 
We are not a party to, and none of our property is the subject of, any pending legal proceedings other than routine litigation that is incidental to our business. To our knowledge, no governmental authority is contemplating any such proceedings.
 
ITEM 4. REMOVED AND RESERVED
 
PART II
 
 
ITEM 5.  MARKET FOR REGISTRANT’S COMMON EQUITY AND RELATED STOCKHOLDER MATTERS AND ISSUER PURCHASES OF EQUITY SECURITIES.
 
MARKET INFORMATION
 
The Company’s common stock trades on the OTC-Bulletin Board under the symbol “ADMT.”  For the periods indicated, the following table sets forth the high and low bid quotations for the Company’s common stock, as reported by the National Quotation Bureau, Inc. The quotations represent inter-dealer quotations without retail mark-up, mark-down or commission and may not necessarily represent actual transactions.
 
Quarter Ended
 
High Bid
   
Low Bid
 
             
Fiscal 2009
           
June 30, 2008
  $ 0.19     $ 0.11  
September 30, 2008
  $ 0.16     $ 0.06  
December 31, 2008
  $ 0.07     $ 0.03  
March 31, 2009
  $ 0.07     $ 0.01  
                 
Fiscal 2010
               
June 30, 2009
  $ 0.04     $ 0.01  
September 30, 2009
  $ 0.03     $ 0.02  
December 31, 2009
  $ 0.07     $ 0.01  
March 31, 2010
  $ 0.02     $ 0.01  
 
 
 

 
 
HOLDERS OF RECORD
 
As of June 29, 2010, 53,939,537 shares of the Company’s common stock were issued and outstanding. On June 29, 2010 there were 1,336 shareholders of record.
 
DIVIDENDS
 
The Company has never paid any cash dividends on its common stock and has no intention of paying cash dividends in the foreseeable future. The Company intends to retain all earnings, if any, for use in the operation and expansion of its business.
 
EQUITY COMPENSATION PLAN
 
As of June 29, 2010, we did not have any compensation plans (including individual compensation arrangements) under which our equity securities were authorized for issuance. Andre DiMino our Chief Executive Officer and Chief Financial Officer has option awards as follows:
 
Number of unexercised options    1,300,000
Option Exercise Price ($)    .29
Option Expiration Date    8/30/2011
 
ITEM 6. SELECTED FINANCIAL DATA.
 
Not Applicable
 
ITEM 7.  MANAGEMENT’S DISCUSSION AND ANALYSIS OF FINANCIAL CONDITION AND RESULTS OF OPERATION
 
FORWARD-LOOKING STATEMENTS
 
This Annual Report on Form 10-K contains forward-looking statements within the meaning of the “safe harbor” provisions under section 21E of the Securities and Exchange Act of 1934 and the Private Securities Litigation Act of 1995. We use forward-looking statements in our description of our plans and objectives for future operations and assumptions underlying these plans and objectives. Forward-looking terminology includes the words “may”, “expects”, “believes”, “anticipates”, “intends”, “forecasts”, “projects”, or similar terms, variations of such terms or the negative of such terms. These forward-looking statements are based on management’s current expectations and are subject to factors and uncertainties which could cause actual results to differ materially from those described in such forward-looking statements. We expressly disclaim any obligation or undertaking to release publicly any updates or revisions to any forward-looking statements contained in this Form 10-K to reflect any change in our expectations or any changes in events, conditions or circumstances on which any forward-looking statement is based. Factors which could cause such results to differ materially from those described in the forward-looking statements include those set forth under “Item. 1 Description of Business – Risk Factors” and elsewhere in, or incorporated by reference into this Annual Report on Form 10-K.
 
 
 

 
 
CRITICAL ACCOUNTING POLICIES
 
REVENUE RECOGNITION
 
CHEMICAL PRODUCTS:
 
Revenues are recognized when products are shipped to end users. Shipments to distributors are recognized as sales where no right of return exists.
 
ELECTRONICS:
 
We recognize revenue from the sale of our electronic products when they are shipped to the purchaser.  Revenue from the sale of the electronics we manufacture for IHS is recognized upon completion of the manufacturing process and shipment of product.  Shipping and handling charges and costs are immaterial. We offer a limited 90 day warranty on our electronics products and a limited 5 year warranty on our electronic controllers for spas and hot tubs.  We have no other post shipment obligations and sales returns have been immaterial.
 
USE OF ESTIMATES:
 
Our discussion and analysis of our financial condition and results of operations is based upon our financial statements, which have been prepared in accordance with accounting principles generally accepted in the United States of America. The preparation of these consolidated financial statements requires us to make estimates and judgments that affect the reported amounts of assets, liabilities, revenues and expenses, and related disclosures of contingent assets and liabilities. On an ongoing basis, we evaluate our estimates, including those related to reserves, deferred tax assets and valuation allowance, impairment of long-lived assets, fair value of equity instruments issued to consultants for services and fair value of equity instruments issued to others. We base our estimates on historical experience and on various other assumptions that we believe to be reasonable under the circumstances, the results of which form the basis for making judgments about the carrying value of assets and liabilities that are not readily apparent from other sources. Actual results may differ from these estimates under different assumptions or conditions; however, we believe that our estimates, including those for the above described items, are reasonable.
 
RECENTLY ADOPTED ACCOUNTING PRONOUNCEMENTS
 
In June 2009, the Financial Accounting Standards Board (“FASB”) issued the FASB Accounting Standards Codification (“Codification”) as the single source of authoritative non-governmental U.S. GAAP which was launched on July 1, 2009. The Codification is a new structure which takes accounting pronouncements and organizes them by approximately ninety accounting topics. The Codification is now the single source of authoritative U.S. GAAP. All guidance included in the Codification is now considered authoritative, even guidance that comes from what is currently deemed to be a non-authoritative section of a standard. Upon the Codification’s effective date, all non-grandfathered, non-SEC accounting literature not included in the Codification has become non-authoritative. The Codification’s effective date for interim and annual periods was September 15, 2009. The Codification is for disclosure only and has not impacted the Company’s financial condition or results of operations. The Company has adopted the Codification, and reflects such adoption throughout this filing.
 
 
 

 
 
Management does not believe that any other recently issued, but not yet effective accounting pronouncement, if adopted, would have a material effect on the accompanying condensed consolidated financial statements.
 
BUSINESS OVERVIEW
 
ADM is a corporation that was organized under the laws of the State of Delaware on November 24, 1969. During the years ended March 31, 2010 and 2009, our operations were conducted through ADM itself and its subsidiaries, Pegasus Laboratories, Inc. and Sonotron Medical Systems, Inc and since August 2008, Action Industries Unlimited, LLC. ITI was deconsolidated as of October 18, 2006 upon the consummation of ITI’s initial public offering. Our investment in ITI from October 18, 2006 through March 31, 2008 was reported under the equity method of accounting. Since April 1, 2008 we reported our investment in ITI at fair value.  As reported by ITI, on February 12, 2010 all of ITI’s assets were acquired by IHS, an unaffiliated entity controlled by ITI’s former Chairman of the Board.
 
We are a technology-based developer and manufacturer of diversified lines of products in the following four areas: (1) environmentally safe chemical products for industrial use, (2) the manufacturing and sale of electronic medical and other devices,(3) cosmetic and topical dermatological products, and (4) anti-static conductive paints, coatings and other products. We have historically derived most of our revenues from the development, manufacture and sale of chemical products, and, to a lesser extent, from our electronic devices and topical dermatological products.  However, during the fiscal year ended March 31, 2009, we derived an increased amount of our revenue from the sale/rental and manufacturing of electronic devices. This revenue was significantly decreased by the amount of $441,556 in the fiscal year ended March 31, 2010. Our electronics segment also includes our Sonotron and Action subsidiaries.
 
RESULTS OF OPERATIONS FOR THE YEAR ENDED MARCH 31, 2010 AS COMPARED TO MARCH 31, 2009
 
REVENUES AND GROSS MARGINS
 
Revenues were $1,166,591 for the year ended March 31, 2010 as compared to $1,486,283 for the year ended March 31, 2009, a decrease of $319,692, or 22%. The decrease mainly resulted from a decrease in sales of finished medical devices to our affiliate, ITI, and IHS of approximately $489,917, and a decrease in sales to new and existing electronic customers from our Action electronic subsidiary in the amount of $16,699. Spas are luxury or discretionary items, and due to the poor economic condition demand has been reduced for related products from our Action subsidiary. These decreases were partially offset by an increase in sales to chemical customers in our new Anti-static Industries division in the amount of $69,450, and an increase in sales to an existing electronic customer in the amount of $57,128.
 
Gross profits and gross margins were $464,833, or 40%, and $405,212, or 27%, an increase of $59,621 or 15% for the years ended March 31, 2010 and 2009, respectively. Gross profit percentages increased from sales of our chemical products by 7% mainly due to an overall increase in chemical sales, including our new Anti-static Industries division in the amount of $68,810, and as a result of a 12% decrease in labor cost percentages in fiscal year 2010, partially offset by a slight decrease in gross profit percentages from raw materials and finished goods. Gross profit percentages decreased 15% from sales of our electronic devices as a result of increased labor cost percentages; electronic segment inventory cost adjustments and the write off of obsolete inventory, partially offset by slight increased gross profit percentages from the cost of our materials and finished goods.
 
 
 

 
 
OPERATING LOSS
 
Loss from operations for the year ended March 31, 2010 was $510,905, compared to a loss from operations for the year ended March 31, 2009 of $707,487, a decrease of $196,582, or 28%. Selling, general and administrative expenses decreased by $164,956, or 15%, from $1,112,699 to $947,743, mainly due to decreased compensation and health insurance costs in the amount of $220,326, decreased computer costs in the amount of $33,323,  decreased commissions in the amount of $17,586 and decreased advertising costs in the amount of $7,417, partially offset by an increase in depreciation and amortization in the amount of $24,126, accounting fees in the amount of $43,872 and insurance in the amount of $16,937. And additionally offset by a write off of the net book value of an intangible asset, customer lists, for our Action subsidiary in the amount of $29,510 due to recognition of an impairment loss. Compensation and health insurance costs decreased due to an overall staff reduction, a portion of officer’s salary being charged to Wellington Scientific for services, in addition to a decrease in wages paid to an officer and a portion of accounting services not being performed in-house, previously performed in-house. Computer costs decreased due to additional expenses in fiscal year 2009 for implementation of a new accounting software. Commissions decreased as we are no longer paying commissions related to the aqua resin product line, which is no longer being carried at ADM. Depreciation increased as a result of the acquisition of assets from Anti-static Industries of Delaware, Inc. in July 2009, now being depreciated, and as a result of a full year of depreciation related to the acquisition of Action Industries, acquired in September of 2008. Accounting fees increased as a portion of accounting services are now performed by an outside consultant. There was an increase in insurance due to an increase in insurance for our Action subsidiary and for our anti-static business. Research and development expenses increased by $27,995, or 100%, from $0 to $27,995, as a result of new research and development activities during the year ended March 31, 2010. Research and development activities were previously performed in house, and are now being performed by an outside consultant. Cost of sales decreased by $379,313, or 35%, from $1,081,071 to $701,758, primarily as a result of the decrease in sales to ITI and IHS, partially offset by an increase in cost of sales due to the mix of products sold in the chemical division including an increase in sales in the new Antistatic chemical division, and a slight increase in cost of sales in the electronics division due to increase in sales to an existing electronics customer.
 
NET LOSS AND NET LOSS PER SHARE
 
Net loss for the year ended March 31, 2010 was $1,219,225, or $(0.02) per share, compared to a net loss of $8,899,132, or $(0.16) per share, for the year ended March 31, 2009.  Our net loss decreased $7,679,907, or $(0.14) per share. This was mainly the result of a decrease in the loss from the change in fair value of our investment in ITI of $9,945,000 from $10,660,000 for the year ended March 31, 2009, to $715,000, writing the investment down to $0, in the year ended March 31, 2010, offset by a deferred tax benefit recorded in the year ended March 31, 2009 of $2,425,188.
 
 
 

 
 
LIQUIDITY AND CAPITAL RESOURCES
 
At March 31, 2010, we had cash and cash equivalents of $690,975 as compared to $1,155,786 at March 31, 2009. The decrease of $464,811 was primarily the result of cash used in operations in the amount of $360,743 and cash used in investing activities of $91,068. We intend to continue to use our cash for increased marketing costs, and the related administrative expenses, in an effort to increase our revenue.  We expect to have enough cash to fund operations for the next twelve months.  Our note payable to Kearny Federal Savings Bank of $184,000 on March 31, 2010, is secured and collateralized by restricted cash of $228,842. This note bears an interest rate of 2.98% per annum.
 
On July 17, 2009 we purchased the assets of Anti-static Industries of Delaware, Inc. a company involved in the research, development and manufacture of water-based and proprietary electrically conductive paints, coatings and other products and accessories.   The purchase price for the assets was $66,920 of which $38,520 was paid during the year and the balance of $28,400 is a note payable, bearing an imputed interest rate of 3.5% per annum, which will be repaid in equal installments over the next 17 months.
 
OPERATING ACTIVITIES
 
Net cash used by operating activities was $360,743 for the year ended March 31, 2010, as compared to net cash used by operating activities of $685,880 for the year ended March 31, 2009. The use of cash during the year ended March 31, 2010 was primarily due to a net loss of $1,219,225 and an increase in operating liabilities of $18,027, which was primarily offset by a change in the fair market value of our investment in ITI of $715,000, and non-cash charge for depreciation of $62,346 and decrease in net operating assets of $31,690.  
 
The use of cash in 2009 was primarily due to a net loss of $8,899,132 and a net decrease in operating assets of $229,799, which was primarily offset by a non-cash charge for the equity investment loss of $10,660,000, depreciation of $38,218, and decreases in net operating liabilities of $291,991, offset by a deferred tax benefit of $2,425,188.
 
INVESTING ACTIVITIES
 
For the year ended March 31, 2010, net cash used by investing activities was $91,068.  The primary use of cash was for an investment in cash and services rendered of $50,000 in Wellington Scientific LLC for the issuance of a secured convertible note with an interest rate of 10%. In addition we made payments in the amount of $38,520, towards a total purchase price of $66,920 related to the asset purchase agreement with Antistatic Industries of Delaware, Inc., whereby we acquired intangible assets of $45,446, machinery and equipment of $10,000 and inventory in the amount of $11,474.
 
For the year ended March 31, 2009, cash used in investing activities was $427,659. Of this amount, $14,888 was used for the purchase of equipment and $26,300 was received from an officer for repayment of advances made to the officer prior to 2000. We acquired intangible assets of $212,491. Restricted cash which increased $226,580, was used to collateralize the $200,000 note whose proceeds were used for the acquisition of Action.
 
 
 

 
 
FINANCING ACTIVITIES
 
For the year ended March 31, 2010, net cash used for financing activities was $13,000, which was used for repayment on a note from a commercial bank to facilitate our acquisition of substantially all of the assets of Action.
 
During the year ended March 31, 2009, we had net proceeds from notes payable of $200,000, of which we repaid $3,000.
 
Although we expect available funds and funds generated from our operations to be sufficient to meet our anticipated needs for a minimum of 12 months, we may need to obtain additional capital to continue to operate and grow our business. Our cash requirements may vary materially from those currently anticipated due to changes in our operations, including our marketing and sales activities, product development, and the timing of our receipt of revenues. We do not have any material external sources of liquidity or unused sources of funds. Our ability to obtain additional financing in the future will depend in part upon the prevailing capital market conditions, as well as our business performance. There can be no assurance that we will be successful in our efforts to arrange additional financing on terms satisfactory to us or at all.
 
Inflation
 
We believe our operations have not been and, in the foreseeable future, will not be materially and adversely affected by inflation or changing prices.
 
Off-Balance Sheet Arrangements
 
We do not have any off-balance sheet arrangements that have or are reasonably likely to have a current or future effect on our financial condition, changes in financial condition, revenues or expenses, results of operations, liquidity, capital expenditures or capital resources that is material to investors.
 
ITEM 7A. QUANTATATIVE AND QUALITATIVE DISCLOSURES ABOUT MARKET RISK.
 
Not Applicable
 
 
 

 
 
ITEM 8. FINANCIAL STATEMENTS AND SUPPLEMENTARY DATA
 
ADM TRONICS UNLIMITED, INC. AND SUBSIDIARIES
MARCH 31, 2010
 
I N D E X
 
FINANCIAL STATEMENTS:
Page NO.
     
 
Report of Independent Registered Public Accounting Firm
F-1
     
 
Consolidated Balance Sheets as of March 31, 2010 and 2009
F-2
     
 
Consolidated Statements of Operations For the Years Ended March 31, 2010 and 2009
F-3
     
 
Consolidated Statements of Changes in Stockholders’ Equity For the Years Ended March 31, 2010 and 2009
F-4
     
 
Consolidated Statements of Cash Flows For the Years Ended March 31, 2010 and 2009
F-5
     
 
Notes to Consolidated Financial Statements
F-6
 
 
 

 
 
REPORT OF INDEPENDENT REGISTERED PUBLIC ACCOUNTING FIRM
 
To the Board of Directors and
Stockholders of ADM Tronics Unlimited, Inc.
 
We have audited the accompanying consolidated balance sheets of ADM Tronics Unlimited, Inc. and subsidiaries as of March 31, 2010 and 2009, and the related consolidated statements of operations, changes in stockholders’ equity, and cash flows for each of the two years then ended. These consolidated financial statements are the responsibility of the company’s management. Our responsibility is to express an opinion on these consolidated financial statements based on our audits.
 
We conducted our audits in accordance with the standards of the Public Company Accounting Oversight Board (United States). Those standards require that we plan and perform the audit to obtain reasonable assurance about whether the financial statements are free of material misstatement. The company is not required to have, nor were we engaged to perform, an audit of its internal control over financial reporting. Our audit included consideration of internal control over financial reporting as a basis for designing audit procedures that are appropriate in the circumstances, but not for the purpose of expressing an opinion on the effectiveness of the company’s internal control over financial reporting. Accordingly, we express no such opinion. An audit also includes examining, on a test basis, evidence supporting the amounts and disclosures in the financial statements, assessing the accounting principles used and significant estimates made by management, as well as evaluating the overall financial statement presentation. We believe that our audit provides a reasonable basis for our opinion.
 
In our opinion, the financial statements referred to above present fairly, in all material respects, the financial position of ADM Tronics Unlimited, Inc. and subsidiaries as of March 31, 2010 and 2009, and the results of its operations and its cash flows for each of the two years then ended in conformity with accounting principles generally accepted in the United States of America.
 
/s/ Raich Ende Malter & Co. LLP
East Meadow, New York
June 29, 2010
 
 
F-1

 
 
PART I. FINANCIAL INFORMATION
 
ITEM 1. CONSOLIDATED FINANCIAL STATEMENTS
 
ADM TRONICS UNLIMITED, INC. AND SUBSIDIARIES
CONSOLIDATED BALANCE SHEETS
 
   
March 31, 2010
   
March 31, 2009
 
             
             
ASSETS
           
Current assets:
           
    Cash and cash equivalents
  $ 690,975     $ 1,155,786  
    Accounts receivable, net of allowance for doubtful
               
      accounts of $5,352 and $2,500, respectively
    111,484       105,134  
    Due from affiliates
    -       6,977  
    Inventories
    178,629       302,810  
    Prepaid expenses and other current assets
    25,898       23,412  
    Restricted cash
    228,842       226,580  
                 
Total current assets
    1,235,828       1,820,699  
                 
Property and equipment, net of accumulated depreciation
               
    of $41,983 and $28,082, respectively
    56,065       59,968  
Inventory - long term portion
    33,802       43,798  
Investment in ITI - at Fair Market Value
    -       715,000  
Secured convertible note
    52,342       -  
Advances to related parties
    48,285       47,999  
Intangible assets, net of accumulated amortization
               
    of $95,517 and $80,056, respectively
    161,697       194,204  
Other assets
    16,109       18,763  
                 
Total assets
  $ 1,604,128     $ 2,900,431  
                 
LIABILITIES AND STOCKHOLDERS’ EQUITY
               
                 
Current liabilities:
               
    Accounts payable
  $ 122,841     $ 116,137  
    Note payable – bank
    184,000       197,000  
    Note payable - other
    17,400       -  
    Accrued expenses and other current liabilities
    40,813       38,970  
    Customer deposits – ITI
    -       101,025  
                 
Total current liabilities
    365,054       453,132  
                 
Note payable - other, net of current maturities
    11,000       -  
                 
Total liabilities
    376,054       453,132  
                 
Stockholders’ equity:
               
    Preferred stock, $.01 par value; 5,000,000 shares authorized,
               
       no shares issued and outstanding
               
    Common stock, $.0005 par value; 150,000,000 shares
               
       authorized, 53,939,537 shares issued and outstanding at
               
       March 31, 2010 and March 31, 2009
    26,970       26,970  
    Additional paid-in capital
    32,153,597       32,153,597  
    Accumulated deficit
    (30,952,493 )     (29,733,268 )
                 
Total stockholders’ equity
    1,228,074       2,447,299  
                 
                 
Total liabilities and stockholders’ equity
  $ 1,604,128     $ 2,900,431  
 
The accompanying notes are an integral part of these
consolidated financial statements.
 
 
F-2

 
 
                        ADM TRONICS UNLIMITED, INC. AND SUBSIDIARIES
                      CONSOLIDATED STATEMENT OF OPERATIONS
                       FOR THE YEARS ENDED MARCH 31, 2010 and 2009

   
2010
   
2009
 
             
Revenues
   $ 1,166,591      $ 1,486,283  
                 
                 
Costs and expenses:
               
    Cost of sales
    701,758       1,081,071  
    Research and development
    27,995       -  
    Selling, general and administrative
    947,743       1,112,699  
                 
Total operating expenses
    1,677,496       2,193,770  
                 
Operating loss
    (510,905 )     (707,487 )
                 
Interest income, net
    6,680       43,167  
                 
Change in fair value of investment
    (715,000 )     (10,660,000 )
    in ITI
               
                 
Income tax benefit
    -       2,425,188  
                 
Net loss
  ($ 1,219,225 )   ($ 8,899,132 )
                 
Net loss per share, basic and diluted
  ($ 0.02 )   ($ 0.16 )
                 
Weighted average shares outstanding, basic and diluted
    53,939,537       53,939,537  

The accompanying notes are an integral part of these
consolidated financial statements.
 
 
F-3

 
 
                 ADM TRONICS UNLIMITED, INC. AND SUBSIDIARIES
                 CONSOLIDATED STATEMENT OF CHANGES IN STOCKHOLDERS’ EQUITY
                 FOR THE YEARS ENDED MARCH 31, 2010 AND 2009

   
Common Stock Shares
   
Common Stock Amount
   
Additional Paid-in
Capital
   
Accumulated Deficit
   
Total
 
                               
Balance, March 31, 2008
    53,939,537     $ 26,970     $ 32,153,597     ($ 27,629,430 )   $ 4,551,137  
Adjustment to  adopt FAS 159:
                                       
    ITI investment adjustment
    -       -       -       9,220,482       9,220,482  
    Deferred tax credit adjustment
    -       -       -       (2,425,188 )     (2,425,188 )
Net Loss
    -       -       -       (8,899,132 )     (8,899,132 )
                                         
Balance at March 31, 2009
    53,939,537       26,970       32,153,597       (29,733,268 )     2,447,299  
                                         
Net loss
                            (1,219,225 )     (1,219,225 )
                                         
Balance at March 31, 2010
    53,939,537     $ 26,970     $ 32,153,597     ($ 30,952,493 )   $ 1,228,074  

The accompanying notes are an integral part of these consolidated financial statements.
 
F-4

 
ADM TRONICS UNLIMITED, INC. AND SUBSIDIARIES
CONDENSED CONSOLIDATED STATEMENT OF CASH FLOWS
FOR THE YEARS ENDED MARCH 31,
 
   
2010
   
2009
 
Cash flows from operating activities:
           
Net Loss
  ($  1,219,225 )   ($ 8,899,132 )
Adjustments to reconcile net loss to net
               
cash used in operating activities:
               
Depreciation and amortization
    62,346       38,218  
Impairment of intangibles
    29,510          
Bad debt expense
    4,251       2,414  
Interest income
    (2,342 )     -  
Net change in fair market value on investment in ITI
    715,000       10,660,000  
Deferred tax benefit
    -       (2,425,188 )
Changes in operating assets and liabilities:
               
 (Increase) decrease in:
               
Inventory
    51,921       201,210  
Accounts receivable
    (10,601 )     (6,278 )
Prepaid expenses
    (19,261 )     41,844  
Due from affiliate
    6,977       (6,977 )
Deposits
    2,654          
 Increase (decrease) in:
               
Accounts payable and accrued expenses
    25,322       (151,188 )
Customer deposit - ITI
    (7,295 )     (140,803 )
                 
Net cash used in operating activities
    (360,743 )     (685,880 )
                 
Cash flows from investing activities:
               
Advances to related party
    (286 )     -  
Collections of advances to related parties
    -       26,300  
Payment and services rendered  for secured convertible note
    (50,000 )     -  
Payment for asset acquisition
    (38,520 )     (212,491 )
Deposit - restricted cash
    (2,262 )     (226,580 )
Purchases of property and equipment
    -       (14,888 )
                 
Net cash used by investing activities
    (91,068 )     (427,659 )
                 
Cash flows from financing activities:
               
    Proceeds from note payable - Bank
    -       200,000  
Repayments on note payable - Bank
    (13,000 )     (3,000 )
                 
Net cash (used in) provided by financing activities
    (13,000 )     197,000  
                 
Net decrease in cash
    (464,811 )     (916,539 )
                 
Cash at beginning of period
    1,155,786       2,072,325  
                 
Cash at end of period
  $ 690,975     $ 1,155,786  
                 
Cash paid for:
               
           Interest
  $ 6,185       -  
           Income taxes
  $ 14,849     $ 1,810  
                 
Non-cash disclosure:
               
                 
The Company financed insurance premiums during the period.
               
Increase in prepaid insurance and accounts payable
  $ 16,775     $ 18,475  
                 
Transfer of inventory to Ivivi, decrease in inventory
               
and customer deposits - ITI
  $ 93,730       -  
                 
See Note 2 for a summary of non-cash investing activities.
               
 
The accompanying notes are an integral part of these unaudited
condensed consolidated financial statements.
 
 
F-5

 
 
ADM TRONICS UNLIMITED, INC. AND SUBSIDIARIES
NOTES TO CONSOLIDATED FINANCIAL STATEMENTS
MARCH 31, 2010 AND 2009
 
NOTE 1 - ORGANIZATIONAL MATTERS
 
ADM Tronics Unlimited, Inc. (“we”, “us”, “the company” or “ADM”), was incorporated under the laws of the state of Delaware on November 24, 1969. We are authorized under our Certificate of Incorporation to issue 150,000,000 common shares, with $.0005 par value, and 5,000,000 preferred shares with $.01 par value.
 
NATURE OF BUSINESS
 
We are a manufacturing and engineering concern whose principal lines of business are the production and sale of chemical products and the manufacture and sale of electronics.  On August 27, 2008, we acquired all of the assets of Action Spas, a manufacturer of electronic controllers for spas and hot tubs, under our fully owned subsidiary Action Industries Unlimited, LLC (“Action”).  With this acquisition, our previous Medical segment was redefined as our Electronics segment, and the ongoing operations of Action are now reported under this segment. On July 17, 2009, we purchased the assets of Antistatic Industries of Delaware, Inc., a company involved in the research, development and manufacture of water-based and proprietary electrically conductive paints, coatings and other products and accessories which can be used by electronics, computer, pharmaceutical and chemical companies to prevent, reduce or eliminate static electricity.
 
Our chemical product line is principally comprised of water-based chemical products used in the food packaging and converting industries, and anti-static conductive paints, coatings and other products. These products are sold to customers located in the United States, Australia, Asia and Europe. Electronics equipment is manufactured in accordance with customer specifications on a contract basis. Our electronic device product line consists principally of proprietary devices used in the treatment of joint pain in humans and animals, tinnitus and electronic controllers for spas and hot tubs. These products are sold to customers located principally in the United States.
 
NOTE 2 - SIGNIFICANT ACCOUNTING POLICIES
 
CONSOLIDATION
 
The consolidated financial statements include the accounts of ADM Tronics Unlimited, Inc. and its subsidiaries. All significant intercompany balances and transactions have been eliminated in consolidation.
 
USE OF ESTIMATES
 
These condensed consolidated financial statements have been prepared in accordance with accounting principles generally accepted in the United States and, accordingly, require management to make estimates and assumptions that affect the reported amounts of assets, liabilities, revenues and expenses, and related disclosures of contingent assets and liabilities.  Significant estimates made by management include expected economic life and value of our medical devices, reserves, deferred tax assets, valuation allowance, impairment of long lived asset, fair value of equity instruments issued to consultants for services and fair value of equity instruments issued to others, option and warrant expenses related to compensation to employees and directors, consultants and investment banks, allowance for doubtful accounts, and warranty reserves. Actual results could differ from those estimates.
 
 
 

 
 
FAIR VALUE OF FINANCIAL INSTRUMENTS
 
On April 1, 2008, the Company adopted the accounting pronouncements with respect to fair value measurements. Please refer to Note 7 for additional details.  For certain of our financial instruments, including accounts receivable, inventories, secured convertible note, accounts payable, accrued expenses, and notes payable – other,  the carrying amounts approximate fair value due to their relatively short maturities.
 
CASH AND EQUIVALENTS
 
Cash equivalents are comprised of certain highly liquid investments with maturities of three months or less when purchased. We maintain our cash in bank deposit accounts, which at times, may exceed federally insured limits. We have not experienced any losses to date as a result of this policy.
 
ACCOUNTS RECEIVABLE AND ALLOWANCE FOR DOUBTFUL ACCOUNTS
 
Accounts receivable represent uncollateralized customer obligations due under normal trade terms generally requiring payment within 30 days from the invoice date. Follow-up calls and correspondence is made if unpaid accounts receivable go beyond the invoice due date. Payments of accounts receivable are allocated to the specific invoices identified on the customer’s remittance advice.
 
Accounts receivable are stated at the amount management expects to collect from outstanding balances. The carrying amounts of accounts receivable is reduced by a valuation allowance that reflects management’s best estimate of the amounts that will not be collected. Management individually reviews all accounts receivable balances that exceed the due date and estimates the portion, if any, of the balance that will not be collected. Management provides for probable uncollectible amounts through a charge to expenses and a credit to a valuation allowance, based on its assessment of the current status of individual accounts. Balances that are still outstanding after management has used reasonable collection efforts are written off through a charge to the valuation allowance and a credit to accounts receivable.
 
REVENUE RECOGNITION
 
CHEMICAL PRODUCTS:
 
Revenues are recognized when products are shipped to end users. Shipments to distributors are recognized as sales where no right of return exists.
 
 
 

 
 
ELECTRONICS:
 
We recognize revenue from the sale of our electronic products when they are shipped to the purchaser.  Revenue from the sale of the electronics we manufactured for Montvale Technologies, Inc. (formerly known as Ivivi Technologies, Inc.) (“ITI”), through February 12, 2010, and manufactured for Ivivi Health Sciences, LLC (“IHS”), subsequent to February 12, 2010, is recognized upon completion of the manufacturing process and shipment of product. Shipping and handling charges and costs have been de minimis. We offer a limited 90 day warranty on our electronics products and a limited 5 year warranty on our electronic controllers for spas and hot tubs.  We have no other post shipment obligations and sales returns have been de minimis. Based on prior experience, no amounts have been accrued for potential warranty costs and such costs were nominal,less than $500, for the fiscal years ended March 31, 2010 and March 31, 2009.
 
WARRANTY LIABILITIES
 
We offer a limited 90 day warranty on our electronics products and a 5 year limited warranty on all of our electronic controllers for spas and hot tubs sold through Action.  This product lines’ past experience has resulted in immaterial costs associated with warranty issues.  Therefore, no warranty liabilities have yet been recorded.  We consider the amount of warranty revenue, included in the sales of our electronic products, to be immaterial based upon our historical experience.
 
RESTRICTED CASH
 
Restricted cash represents funds on deposit with a financial institution that secure the bank note payable, discussed in “Note 17 – Note Payable, Bank”.
 
INVENTORY
 
Inventories are stated at the lower of cost (first-in, first-out method) or market. Inventory that is expected to be sold within one operating cycle (1 year) is classified as a current asset. Inventory that is not expected to be sold within 1 year, based on historical trends, is classified as Inventory - long term.
 
PROPERTY & EQUIPMENT
 
We record our equipment at historical cost. We expense maintenance and repairs as incurred. Depreciation is provided for by the straight-line method over five to seven years, the estimated useful lives of the property and equipment.
 
LONG-LIVED ASSETS
 
We follow the accounting pronouncement with respect to accounting for impairment of disposal of long-lived assets, which established a “primary asset” approach to determine the cash flow estimation period for a group of assets and liabilities that represents the unit of accounting for a long lived asset to be held and used. Long-lived assets to be held and used are reviewed at least annually for impairment whenever events or changes in circumstances indicate that the carrying amount of an asset may not be recoverable. The carrying amount of a long-lived asset is not recoverable if it exceeds the sum of the undiscounted cash flows expected to result from the use and eventual disposition of the asset. Long-lived assets to be disposed of are reported at the lower of carrying amount or fair value less cost to sell. During the year ended March 31, 2010 an impairment loss in the amount of $29,510 was recognized and in 2009, no impairment loss was recognized. Management decided in fiscal year 2010 to write off customer list intangibles due to impairment loss related to their subsidiary Action Industries Unlimited, LLC.
 
 
 

 
 
ADVERTISING COSTS
 
Advertising costs are expensed as incurred and amounted to approximately $16,934 and $24,000 for the years ended March 31, 2010 and 2009, respectively.
 
STOCK OPTIONS AND WARRANTS
 
In April 2006, we adopted the accounting pronouncement with respect to the fair value recognition of stock based compensation, to account for compensation costs under our stock option plans and those of our subsidiary.
 
INCOME TAXES
 
We report the results of our operations as part of a consolidated tax return with our subsidiaries. We have entered into a tax sharing arrangement where each of the members compensates each other to the extent that their respective taxes are affected as a result of this arrangement. Deferred income taxes result primarily from temporary differences between financial and tax reporting. Deferred tax assets and liabilities are determined based on the difference between the financial statement bases and tax bases of assets and liabilities using enacted tax rates. A valuation allowance is recorded to reduce a deferred tax asset to that portion that is expected to more likely than not be realized.
 
On April 1, 2007, the Company adopted the accounting pronouncement with respect to accounting for uncertainty in income taxes, which clarified the accounting and disclosures for uncertain tax positions related to income taxes recognized in the financial statements and addresses the determination of whether tax benefits claimed or expected to be claimed on a tax return should be recorded in the financial statements.  The Company recognizes the financial statement benefit of a tax position only after determining that the relevant tax authority would more likely than not sustain the position following an audit. For tax positions meeting the more-likely-than-not threshold, the amount recognized in the consolidated financial statements is the largest benefit that has a greater than 50 percent likelihood of being realized upon ultimate settlement with the relevant tax authority. At the adoption date and at March 31, 2010, the Company applied this pronouncement to all tax positions for which the statute of limitations remained open, and determined there was no material impact on the consolidated financial statements.
 
The Company files income tax returns in several jurisdictions. The Company’s tax returns remain subject to examination, by major jurisdiction, for the years ended March 31, as follows:
 
 
 

 
 
Jurisdiction    Fiscal Year
 
Federal  2006 and beyond 
New Jersey  2005 and beyond 
 
There are currently no tax years under examination by any major tax jurisdictions.
 
In connection with the adoption of the guidance, the Company will recognize interest and penalties accrued on any unrecognized tax benefits as a component of income tax expense.  As of March 31, 2010, the Company has no accrued interest or penalties related to uncertain tax positions.
 
NET LOSS PER SHARE
 
We compute basic loss per share by dividing net loss by the weighted average number of common shares outstanding.  Diluted loss per share is computed similar to basic loss per share, except that the denominator is increased to include the number of additional common shares that would have been outstanding if the potential shares had been issued and if the additional shares were dilutive.  Common equivalent shares are excluded from the computation of net loss per share if their effect is anti-dilutive.
 
Per share basic and diluted net loss amounted to $0.02 and $0.16 for the year ended March 31, 2010 and March 31, 2009, respectively.  The assumed exercise of common stock equivalents was not utilized in the computation for years ended March 31, 2010 and 2009, since the effect would be anti-dilutive.  There were 2,750,000 and 11,626,854 common stock equivalents at March 31, 2010 and 2009, respectively.
 
NON-CASH INVESTING ACTIVITY
Non-cash investing activity is excluded from the consolidated statement of cash flows. For the year ended March 31, 2010, non-cash activites included the following:
 
       
Asset Acquisition of Antistatic Industries of Delaware, Inc.:
     
Fair Value of assets acquired
  $ 66,920  
         
Cash paid to Seller
  $ (26,920 )
Cash paid to Seller under Note Payable
    (11,600 )
Note payable outstanding at March 31, 2010
    (28,400 )
    $ (66,920 )
         
         
Year ended March 31, 2010 Asset Acquisitions
       
Details of Acquisition
       
Fair Value of assets acquired
  $ 66,920  
Note Payable balance at March 31, 2010
    (28,400 )
Total cash paid for acquisition
  $ 38,520  
 
 
 

 
 
RECENT ACCOUNTING PRONOUNCEMENTS
 
In June 2009, the Financial Accounting Standards Board (“FASB”) issued the FASB Accounting Standards Codification (“Codification”) as the single source of authoritative non-governmental U.S. GAAP which was launched on July 1, 2009. The Codification is a new structure which takes accounting pronouncements and organizes them by approximately ninety accounting topics. The Codification is now the single source of authoritative U.S. GAAP. All guidance included in the Codification is now considered authoritative, even guidance that comes from what is currently deemed to be a non-authoritative section of a standard. Upon the Codification’s effective date, all non-grandfathered, non-SEC accounting literature not included in the Codification has become non-authoritative. The Codification’s effective date for interim and annual periods was September 15, 2009. The Codification is for disclosure only and has not impacted the Company’s financial condition or results of operations. The Company has adopted the Codification, and reflects such adoption throughout this filing.
 
Management does not believe that any other recently issued, but not yet effective accounting pronouncement, if adopted, would have a material effect on the accompanying unaudited condensed consolidated financial statements.

 
NOTE 3 - INVENTORY
 
Inventory as of March 31, 2010 and 2009, consists of the following:

March 31, 2010:
                 
   
Current
   
Long Term
   
Total
 
Raw materials
 
$
134,544
   
$
23,113
   
$
157,657
 
Finished goods
   
44,085
     
10,689
     
54,774
 
   
$
178,629
   
$
33,802
   
$
212,431
 

March 31, 2009:
                       
   
Current
   
Long Term
   
Total
 
Raw materials
 
$
232,851
   
$
33,109
   
$
265,960
 
Finished goods
   
 69,959
     
10,689
     
80,648
 
   
$
302,810
   
$
43,798
   
$
346,608
 
 
Inventory at April 1, 2008 was $547,819.
 
 
 

 
 
NOTE 4 - INVESTMENT IN IVIVI AND RELATED CAPITAL TRANSACTIONS
 
Our former majority owned subsidiary, ITI filed a Registration Statement with the Securities and Exchange Commission (“SEC”) for the initial public offering of a portion of its common stock.  The Registration Statement was declared effective by the SEC on October 18, 2006.  As a result of the consummation of ITI’s initial public offering, we no longer owned a majority of the outstanding common stock of ITI.  Since October 18, 2006, we could exert significant influence based upon the percentage of ITI’s stock we owned.  As a result, our investment in ITI was reported during the period from October 18, 2006 until March 31, 2008 under the equity method of accounting, whereby we recognized our share of ITI’s earnings or losses as they are incurred.  Effective April 1, 2008 (“the Adoption Date”), we have adopted the accounting pronouncement with respect to the fair value of financial assets and liabilities for our investment in ITI.  Management’s reason for electing the fair value option for its investment in ITI is to increase the efficiency of our financial reporting responsibilities.  The fair value of our investment in ITI at the adoption date was approximately $11,375,000.  The adoption of the pronouncement, with respect to our investment in ITI, resulted in the recognition of the following:
 
Pre-tax cumulative-effect adjustment to retained earnings: 
 
$
9,220,483
 
Deferred tax liability: 
   
2,425,188
 
         
Post-tax cumulative-effect adjustment to retained earnings: 
 
$
6,795,295
 
 
The fair value of our investment in ITI as of March 31, 2010 and 2009 was $0 and $715,000, respectively. In August 2009, ITI notified through filings with the SEC, it would most likely not be able to continue its operations. On February 12, 2010, ITI sold substantially all of its assets to IHS, and in an additional filing with the SEC, it indicated that proceeds from such sale would not be sufficient to pay all of its liabilities. ITI also publicly stated that it intended to liquidate and anticipated there would not be a distribution to its shareholders. In August 2009, we wrote down our investment in ITI to $0.
 
NOTE 5 – NOTE RECEIVABLE
 
On June 4, 2009 the Company invested in Wellington Scientific, LLC (“Wellington”) which has rights to an electronic uroflowmetry diagnostic medical device technology.  These products are currently distributed in South Africa, but are not compliant with US FDA requirements for distribution in the US. The Company intends to modify the design of these products for compliance with FDA standards and create the required documentation for distribution of these products in the US.  The Company invested a total of $50,000, with $10,000 provided in cash, and $40,000 in services to Wellington.  Wellington issued a convertible note to the Company for a principal amount of $50,000 with an interest rate of 10% due at various dates through April 2011.  The Company shall be the exclusive manufacturer of these products for Wellington and shall receive a percentage of future sales, if any.
 
 
 

 
 
 NOTE 6 -
INTANGIBLE ASSETS
 
Intangible assets are being amortized using the straight line method over periods ranging from 3-15 years with a weighted average remaining life of approximately 6.8 years.

   
March 31, 2010
   
March 31, 2009
 
   
Cost
   
Accumulated Amortization
   
Net Carrying Amount
   
Cost
   
Accumulated Amortization
   
Net
Carrying
Amount
 
Patents & Trademarks
  $ 71,768     $ (58,026 )   $ 13,742     $ 61,768     $ (56,142 )   $ 5,626  
Formulas
    25,446       (1,201 )     24,245       -       -       -  
Non-Compete Agreement
    50,000       (11,310 )     38,690       50,000       (4,167 )     45,833  
Controller Design
    100,000       (22,619 )     77,381       100,000       (8,333 )     91,667  
Customer List
    10,000       (2,361 )     7,639       62,491       (11,414 )     51,077  
    $ 257,214     $ (95,517 )   $ 161,697     $ 274,259     $ (80,056 )   $ 194,203  

Amortization expense was $48,443 and $28,010 for the twelve months ended March 31, 2010 and 2009, respectively. Estimated aggregate future amortization expense related to intangible assets is as follows:

2011
    28,431  
2012
    28,154  
2013
    25,451  
2014
    24,385  
2015
    24,335  
 Thereafter
    30,941  
    $ 161,697  

Management has reviewed intangibles as part of their annual review and has decided to write off customer list intangibles due to impairment loss related to their subsidiary Action Industries Unlimited, LLC. The carrying amount of the intangible exceeds the sum of the future undiscounted cash flows expected to result from the use and eventual disposition of the asset. The net book value of $29,510 was written off for customer lists in March 2010. Management does not believe that the remaining intangibles are impaired.
 
 
 

 
 
NOTE 7 – FAIR VALUE MEASUREMENTS

Effective April 1, 2008, the Company adopted the accounting pronouncement with respect to fair value of financial assets and liabilities, as well as for any other assets and liabilities that are carried at fair value on a recurring basis. The adoption of the provisions related to financial assets and liabilities and other assets and liabilities that are carried at fair value on a recurring basis did not materially impact the Company’s consolidated financial position and results of operations.
 
The pronouncement defines fair value as the exchange price that would be received for an asset or paid to transfer a liability (an exit price) in the principal or most advantageous market for the asset or liability in an orderly transaction between market participants on the measurement date. The pronouncement also establishes a fair value hierarchy, which requires an entity to maximize the use of observable inputs and minimize the use of unobservable inputs when measuring fair value. The pronouncement describes three levels of inputs that may be used to measure fair value:

Level 1
 
Unadjusted quoted prices in active markets that are accessible at the measurement date for identical, unrestricted assets or liabilities.
     
Level 2
 
Quoted prices in markets that are not active; or other inputs that are observable, either directly or indirectly, for substantially the full term of the asset or liability.
     
Level 3
 
Prices or valuation techniques that require inputs that are both significant to the fair value measurement and unobservable.

On March 31, 2008 the fair value of our investment in ITI was $2,154,517. As of March 31, 2009 the ITI share price had deteriorated and we recorded a decrease in fair value to $715,000.

The following table presents assets measured at fair value on a recurring basis at March 31, 2009:
 
    Level 1     Level 2      Level 3     Total  
Investment in ITI   $ 715,000     $ --     $ --     $ 715,000  
 
During the quarter ended June 30, 2009, management had determined the investment in ITI should be valued using both Level 1 and Level 2 inputs.

In August 2009, ITI notified through filings with the SEC, it would most likely not be able to continue its operations. On February 12, 2010, ITI sold substantially all of its assets to IHS, and in an additional filing with the SEC, it indicated that proceeds from such sale would not be sufficient to pay all of its liabilities. ITI also publicly stated that it intended to liquidate and anticipated there would not be a distribution to its shareholders. In August 2009, the Company recorded a decrease in fair value of $715,000 writing down the investment in ITI to $0.

The following table presents assets measured at fair value on a recurring basis at March 31, 2010:
 
    Level 1     Level 2     Level 3     Total  
 Investment in ITI    $ 715,000     $ (715,000   $ --     $ --  
 
 
 

 
 
NOTE 8 - CONCENTRATIONS
 
During the year ended March 31, 2010, three customers accounted for 50% of our revenue. As of March 31, 2010 two customers accounted for 65% of our accounts receivable.
 
During the year ended March 31, 2009, two customers accounted for 54% of our revenue. As of March 31, 2009, two customers accounted for 67% of our accounts receivable.
 
NOTE 9 - SEGMENT INFORMATION
 
Information about segments is as follows:
 
   
Chemical
   
Electronics
   
Total
 
                   
Year ended March 31, 2010
                 
Revenues from external customers
 
$
890,355
   
$
276,236
   
$
1,166,591
 
Segment loss (operating loss)
   
(61,679
)
   
(449,226
)
   
(510,905
)
                         
Year ended March 31, 2009
                       
Revenues from external customers
 
$
768,491
   
$
717,792
   
$
1,486,283
 
Segment loss (operating loss)
   
(256,270
)
   
(451,217
)
   
(707,487
)
                         
                         
Total assets at March 31, 2010
 
$
1,012,324
   
$
591,804
   
$
1,604,128
 
 
NOTE 10 - PROPERTY AND EQUIPMENT
 
Our property and equipment as of March 31, 2010 and 2009 is as follows:
 
   
2010
   
2009
 
             
Computer equipment
 
$
13,364
   
$
13,366
 
Machinery and equipment
   
80,934
     
70,934
 
Leasehold improvements
   
3,750
     
3,750
 
     
98,048
     
88,050
 
                 
Accumulated depreciation
   
(41,983
   
(28,082
                 
Property and equipment, net
 
$
56,065
   
$
59,968
 
 
Depreciation expense related to property and equipment amounted to $13,901 and $10,209 during the years ended March 31, 2010 and 2009, respectively.
 
 
 

 
 
NOTE 11 - INCOME TAXES
 
At March 31, 2010, the Company had federal and state net operating loss carryforwards, or “NOLs,” of approximately $6.4 million, which are due to expire through fiscal 2030. These NOLs may be used to offset future taxable income through their respective expiration dates and thereby reduce or eliminate our federal and state income taxes otherwise payable. A valuation allowance is provided when it is more likely than not that some portion or all of the deferred tax assets will not be realized. Ultimate utilization/availability of such net operating losses and credits is dependent upon the Company’s ability to generate taxable income in future periods and may be significantly curtailed if a significant change in ownership occurs in accordance with the provisions of the Tax Reform Act of 1986.
 
Due to the uncertainty related to, among other things, the extent and timing of its future taxable income, the Company offset the deferred tax assets related to bad debts, depreciation and amortization and NOL’s by an equivalent valuation allowance at March 31, 2010.
 
Significant components of deferred tax assets and liabilities are as follows:
 
   
2010
   
2009
 
             
Deferred tax assets (liabilities):
           
Net operating loss carry forward
  $
2,571,000
   
2,369,000
 
Unrealized gain on Investment in ITI
   
-      
     
(286,000
Bad debts
   
     2,000
     
     1,000
 
Depreciation and Amortization
   
1,000
     
     1,000
 
Deferred tax assets
   
 2,574,000
     
 2,085,000
 
Valuation allowance
   
(2,574,000
   
 (2,085,000
                 
Net deferred tax assets
  $
-
    $
-
 
 
The provision for income taxes at March 31, 2010 and 2009 differs from that amount using the statutory federal income tax rate as follows:
 
   
2010
   
2009
 
             
Statutory federal income tax rate
   
(34
)%
   
(34
)%
State income taxes, net of federal taxes
   
(6
)
   
(6
)
Nondeductible items
           
40
 
Valuation allowance
   
40
         
                 
Effective income tax rate
   
0
%
   
0
%
 
NOTE 12 - OPTIONS AND WARRANTS OUTSTANDING
 
No options were granted during the years ended March 31, 2010 and 2009.  During the year ended March 31, 2007, ADM granted an aggregate of 3,500,000 stock options to employees and consultants. The options have an exercise price of $0.29, were fully vested at the date of grant.  On August 30, 2009, 750,000 of such options expired and the balance are exercisable until August 30, 2011. The options were valued at $351,529 using the Black Scholes option pricing model with the following assumptions: risk free interest rate of 4.9%, volatility of 85%, estimated life of 1.5 years and dividend rate of 0%. The options have a remaining life of 1.4 years at March 31, 2010.
 
NOTE 13 - COMMITMENTS AND CONTINGENCIES
 
We lease our office and manufacturing facility under a non-cancelable operating lease, which expires on June 30, 2018. The company’s future minimum lease commitment at March 31, 2010 is $837,969.
 
 
 

 
 
       
Period
 
Per year
 
2011
  $ 96,875  
2012
  $ 96,875  
2013
  $ 96,875  
2014
  $ 102,688  
2015
  $ 104,625  
Thereafter
  $ 340,031  
    $ 837,969  
         
 
Rent and real estate tax expense for all facilities for the years ended March 31, 2010 and 2009 was approximately $94,000 and $86,000, respectively.
 
NOTE 14 - LEGAL PROCEEDINGS
 
We are involved, from time to time, in litigation and proceedings arising out of the ordinary course of business. There are no pending material legal proceedings or environmental investigations to which we are a party or to which our property is subject.
 
NOTE 15 - RELATED PARTY TRANSACTIONS
 
ADVANCES TO RELATED PARTIES
 
As of March 31, 2010, ADM was owed $9,552 from advances made to an officer. No advances have been made since 2000. The advances bear interest at the rate of 3% per year. Interest accrued for the years ended March 31, 2010 and 2009 was $286 and $652 respectively. Total accrued interest at March 31, 2010 was $38,733.
 
MANAGEMENT SERVICES AGREEMENT
 
In August 2001, ADM entered into a management services agreement, as amended, with ITI and ADM allocated portions of its real property facilities for use by ITI for the conduct of its business. ADM and ITI used office, manufacturing and storage space in a building located in Northvale, New Jersey, currently leased by ADM. Pursuant to the terms of the management services agreement, ADM determined the portion of space allocated to ITI on a monthly basis, and ITI reimbursed ADM monthly for its portion of the lease costs, real property taxes and related costs plus any invoices it receives from third parties specific to ITI.
 
During the year ended March 31, 2010 ITI had approximately $17,000 in management services provided to it by ADM pursuant to the management services agreement.  ITI had approximately $69,000 in management services provided to it by ADM pursuant to the management services agreement during the year ended March 31, 2009.
 
On August 1, 2009, we entered into an agreement with ITI to provide services described below and canceled our management services agreement described above.  Under the agreement:
 
we provided ITI with engineering services, including quality control and quality assurance services along with regulatory compliance services warehouse fulfillment services and network administration services including hardware and software services;
 
 
 

 
 
we were paid at the rate of $26,000 per month by ITI for these services; and ITI agreed to terminate the four full time engineers and three part time engineers then employed by ITI.
 
On February 12, 2010 concurrent with the acquisition of ITI’s assets by IHS, we agreed to provide the above services to IHS and IHS agreed to pay us $26,000 per month for such services pursuant to a Master Services Agreement. In June 2010, it was agreed that IHS would pay $11,000 for June 2010 and $5,000 per month thereafter for reduced services performed by ADM.
 
MANUFACTURING AGREEMENT
 
ADM and ITI are parties to a manufacturing agreement, dated as of August 15, 2001, and as amended in February, 2005. The manufacturing agreement was subsequently assigned to IHS on February 12, 2010. Under the terms of the agreement, ADM has agreed to serve as the exclusive manufacturer of all current and future medical and nonmedical electronic and other electronic devices or products to be sold or rented by ITI. For each product that ADM manufactures, ITI pays ADM an amount equal to 120% of the sum of (i) the actual, invoiced cost for raw materials, parts, components or other physical items that are used in the manufacture of the product and actually purchased for such entity by ADM, if any, plus (ii) a labor charge based on ADM’s standard hourly manufacturing labor rate, which ADM believes is more favorable than could be attained from unaffiliated third parties. Under the terms of the agreement, if ADM is unable to perform its obligations to ITI under the manufacturing agreement or is otherwise in breach of any provision of the manufacturing agreement, ITI has the right, without penalty, to engage third parties to manufacture some or all of its products. In addition, if ITI elects to utilize a third-party manufacturer to supplement the manufacturing being completed by ADM, ITI has the right to require ADM to accept delivery of its products from these third-party manufacturers, finalize the manufacture of the products to the extent necessary and ensure that the design, testing, control, documentation and other quality assurance procedures during all aspects of the manufacturing process have been met.
 
As reported in its filings with the SEC, on February 12, 2010, ITI sold substantially all of its assets pursuant to the terms of an asset purchase agreement and ITI expects to be dissolved as soon as practicable thereafter. As a result, our future fiscal periods will not include material purchase orders from ITI, and may not include material purchase orders from the purchaser of its assets. As a result of ITI’s asset sale and expected dissolution, we will be required to seek new customers in order to replace such revenue.
 
Pursuant to the manufacturing agreement, sales of finished goods to ITI during the year ended March 31, 2010 were approximately $62,000. Sales and manufacturing charges for the year ended March 31, 2009 were approximately $547,000. After the assets were purchased from ITI to IHS on February 12, 2010, sales to IHS were approximately $12,000.
 
 
 

 
 
Activity with ITI can be summarized as follows:
 
             
   
2010
   
2009
 
             
Balance, beginning of period
  $ (104,320 )   $ (241,828 )
                 
Advances from ITI
    (4,069 )     (159,448 )
Transfer of inventory to ITI
    93,730       -  
ITI purchases from ADM
    62,307       546,874  
Charges from ITI
    (7,214 )     (9,617 )
Charges to ITI
    172,760       68,934  
Payments from ITI
    (223,704 )     (315,556 )
Payments to ITI
    10,510       6,321  
                 
Due (to) ITI, end of period
  $ (0 )   $ (104,320 )
 
At March 31, 2010 and 2009 ADM had a receivable balance of $0 and $6,977, respectively, from ITI.
 
NOTE 16 – NOTE PAYABLE – OTHER
 
On July 17, 2009 we purchased the assets of Antistatic Industries of Delaware, Inc. a company involved in the research, development and manufacture of water-based and proprietary electrically conductive paints, coatings and other products and accessories.   The purchase price for the assets was $66,920 of which $38,520 was paid during the fiscal year ending March 31, 2010 and the balance of $28,400 is a note payable, bearing imputed interest rate of 3.5% per annum, which will be repaid over the next 17 months.
 
The fair value assigned to the acquired assets was as follows:
Inventory
  $ 11,474  
Equipment
    10,000  
Patents and trademarks
    10,000  
Formulas
    25,446  
Customer list
    10,000  
Total
  $ 66,920  
 
NOTE 17 – NOTE PAYABLE, BANK
 
On August 21, 2008, the Company entered into a note payable with a commercial bank in the amount of $200,000.  This note bears interest at a rate of 2.98% and is secured by cash on deposit with the institution, which is classified as restricted cash.  Amounts outstanding under the note are payable on demand, and interest is payable monthly.  The principal balance of the note at March 31, 2010 was $184,000.
 
NOTE 18 - SUBSEQUENT EVENTS
 
Subsequent Events have been evaluated through June 29, 2010, the date the financial statements were filed with the Securities and Exchange Commission (“SEC”).
 
 
 

 
 
ITEM 9. CHANGES IN AND DISAGREEMENTS WITH ACCOUNTANTS ON ACCOUNTING AND FINANCIAL DISCLOSURE.
 
None.
 
ITEM 9A. CONTROLS AND PROCEDURES
 
EVALUATION OF DISCLOSURE CONTROLS AND PROCEDURES.
 
We maintain disclosure controls and procedures (as such term is defined in Rules 13a-15(e) and 15d - 15(e) under the Securities Exchange Act of 1934, as amended (the “Exchange Act”)) that are designed to ensure that information required to be disclosed in our Exchange Act reports is recorded, processed, summarized and reported within the time periods specified in the Securities and Exchange Commission’s rules and forms, and that such information is accumulated and communicated to management, including the Chief Executive Officer and Chief Financial Officer, as appropriate to allow timely decisions regarding required disclosure. Management necessarily applies its judgment in assessing the costs and benefits of such controls and procedures, which, by their nature, can provide only reasonable assurance regarding management’s control objectives.
 
As of the end of the period covered by this annual Report on Form 10-K, we carried out an evaluation, with the participation of our management, including our Chief Executive Officer and Chief Financial Officer, of the effectiveness of our disclosure controls and procedures pursuant to Securities Exchange Act Rule 13a-15. Based on that evaluation as of March 31, 2010, our principal executive officer and principal financial officer concluded that our disclosure controls and procedures (as defined in Rules 13a-15(e) and 15d-15(e) under the Securities Exchange Act of 1934) are effective.
 
MANAGEMENT’S REPORT ON INTERNAL CONTROL OVER FINANCIAL REPORTING
 
Our management is responsible for establishing and maintaining effective internal control over financial reporting (as defined in Rule 13a-15(f) under the Exchange Act) over our company.  Internal control over financial reporting is a process to provide reasonable assurance regarding the reliability of our financial reporting for external purposes in accordance with accounting principles generally accepted in the United States. Because of its inherent limitations, internal control over financial reporting is not intended to provide absolute assurance that a misstatement of our financial statements would be prevented or detected.
 
Management, including our Chief Executive Officer and Chief Financial Officer, has evaluated our internal control over financial reporting as of March 31, 2010, based on the framework in Internal Control - Integrated Framework issued by the Committee of Sponsoring Organizations (COSO) of the Treadway Commission. Based on its assessment, management has concluded that our internal control over financial reporting was effective as of March 31, 2010.
 
This annual report does not include an attestation report of our registered public accounting firm regarding internal control over financial reporting. Management’s report was not subject to attestation by our registered public accounting firm pursuant to temporary rules of the Securities and Exchange Commission that permit us to provide only management’s report in this annual report.
 
 
 

 
 
INTERNAL CONTROL OVER FINANCIAL REPORTING.
 
There were no changes in the Company’s internal control over financial reporting that occurred during the Company’s last fiscal quarter of the fiscal year to which this report relates that have materially affected, or are reasonably likely to materially affect, the Company’s internal control over financial reporting.
 
ITEM 9B. OTHER INFORMATION
 
None
 
PART III
 
ITEM 10. DIRECTORS, EXECUTIVE OFFICERS AND CORPORATE GOVERNANCE.
 
The following table sets forth the names, positions and ages of the Company’s executive officers and directors. All of the Company’s directors serve until the next annual meeting of stockholders or until their successors are elected and qualify. Officers are elected by the board of directors and their terms of offices are, except to the extent governed by employment contracts, at the discretion of the board of directors.
Name
Age
Position
     
Andre’ DiMino
54
President, Chief Executive Officer,
   
Chief Financial Officer and Director
     
Vincent DiMino
84
Director
 
Andre’ DiMino has served as President of the Company since December 2001 and a director and Chief Financial Officer of the Company since 1987. Prior thereto, Mr. DiMino served as Executive Vice President and Chief Operating Officer since 1991 and Secretary and Treasurer of the Company since 1978. Mr. DiMino also served as the Technical Director of ADM Tronics from 1982 to 1991. Mr. DiMino served as Vice Chairman, Executive Vice President and Chief Technology officer of ITI from August 2008 to February 2010.  He also served as Vice Chairman and Co-Chief Executive Officer of ITI from October 2006 to August 2008, and as Chairman and Chief Financial Officer from January 2004 until October 2006 and served as President of ITI from 1989 to January 2004.  Since February 12, 2010 Mr. DiMino has served as Vice President-Engineering, Manufacturing and Regulatory for IHS.
 
Vincent DiMino served as Vice President of Production of the Company from 1969 to 2008 and as a director of the Company since August 1987. 
 
Vincent DiMino is Andre’ DiMino’s uncle. There is no other family relationship between any of the Company’s directors or executive officers.
 
AUDIT COMMITTEE AND AUDIT COMMITTEE FINANCIAL EXPERT
 
Because of the Company’s ongoing efforts to engage qualified board members, the Company does not have a separately designated audit committee or compensation committee at this time. Accordingly, the Company’s Board of Directors also has determined that the Company does not have an audit committee financial expert. The Company continues to seek new board members in order to appoint a separately designated audit committee. The functions which would be performed by an audit committee are performed by the Board of Directors as a whole.
 
 
 

 
 
SECTION 16(A) BENEFICIAL OWNERSHIP REPORTING COMPLIANCE
 
Section 16(a) of the Exchange Act, and the rules and regulations of the Securities and Exchange Commission promulgated there under, requires the Company’s directors, executive officers and persons who own beneficially more than 10% of the Company’s common stock to file reports of ownership and changes in ownership of such stock with the Securities and Exchange Commission. Based solely upon a review of such reports, the Company believes that all of its directors, executive officers and 10% stockholders complied with all applicable Section 16(a) filing requirements during the Company’s last fiscal year.
 
CODE OF ETHICS
 
The Company has adopted a code of ethics that applies to its principal executive officer, principal financial officer, principal accounting officer or controller, or persons performing similar functions. A copy of such Code of Ethics has been filed as Exhibit 14.1 to the Annual Report on Form 10-KSB for the fiscal year ended March 31, 2005.
 
ITEM 11. EXECUTIVE COMPENSATION
 
The following table provides certain summary information for the fiscal years ended March 31, 2010 and 2009 concerning compensation paid, or accrued, by ADM to, or on behalf of, ADM’s President, Chief Executive Officer and Chief Financial Officer (the “Named Officer”). Other than ADM’s President and Chief Executive Officer, the Company does not have any executive officers of the Company whose total annual salary and bonus exceeded $100,000 during the fiscal year ended March 31, 2010.
Name & Principal
Position
 
Year
 
Salary
($)
 
Bonus
($)
 
Option
Awards ($)
 
All Other
Compensation
($)
 
Total
($)
 
Andre DiMino
 
  2010
 
99,840
 
-
 
-
 
      -
 
99,840
 
Chief Executive
 
 2009
   
142,200
 
-
   
    -
 
      -
   
142,200
 
Officer
                               
 
Option Awards
             Equity        
           
Incentive
       
    Number of      
Plan Awards:
       
      Securities  
Number of
 
Number of
       
   
Underlying
 
Securities
 
Securities
       
   
Unexercised
 
Underlying
 
Underlying
       
   
 Options
 
Unexercised
 
Unexercised
 
Option
 
Option
   
(#)
 
Options (#)
 
Unearned
 
Exercise
 
Expiration
Name
 
Exercisable
 
Unexercisable
 
Options (#)
 
Price ($)
 
Date
                     
Andre DiMino
 
1,300,000
 
-
 
-
 
0.29
 
8/30/2011
DIRECTORS’ COMPENSATION
 
 
 

 
 
The Company does not pay fees to its directors, nor does it reimburse its directors for expenses incurred.
 
ITEM 12. SECURITY OWNERSHIP OF CERTAIN BENEFICIAL OWNERS AND MANAGEMENT AND RELATED STOCKHOLDER MATTERS.
 
The following table sets forth information regarding ownership of shares of Company’s common stock, as of June 29, 2010, by (i) each person known to ADM to be the owner of 5% or more of ADM’s common stock (ii) each director and director nominee of ADM, (iii) the Named Officer, and (iv) all directors and officers of ADM as a group. Except as otherwise indicated, each person and each group shown in the table has sole voting and investment power with respect to the shares of the Company’s common stock indicated. For purposes of the table below, in accordance with Rule 13d-3 under the Securities Exchange Act of 1934, as amended, a person is deemed to be the beneficial owner, for purposes of any shares of Common Stock over which he or she has or shares, directly or indirectly, voting or investment power; or of which he or she has the right to acquire beneficial ownership at any time within 60 days after July 10, 2007. As used herein, “voting power” is the power to vote or direct the voting of shares and “investment power” includes the power to dispose or direct the disposition of shares. Common Stock beneficially owned and percentage ownership is based on 53,939,537 shares of Common Stock outstanding as of June 29, 2010. 
   
Number of Shares
       
Name and Address
 
Beneficially Owned
   
Percentage
 
             
Andre’ DiMino
   
19,880,883
(1)
   
35.8
%
c/o ADM Tronics Unlimited, Inc.
               
224 Pegasus Ave.
               
Northvale, NJ 07647
               
                 
Vincent DiMino
   
7,187,928
(2)
   
13.2
%
c/o ADM Tronics Unlimited, Inc.
               
224 Pegasus Ave.
               
Northvale, NJ 07647
               
                 
Eugene Stricker
   
4,188,700
(3)
   
7.8
%
c/o Fifth Avenue Venture Capital Partners
               
42 Barrett Road
               
Lawrence, NY 11559
               
                 
All Executive Officers and Directors
               
as a group (three persons)
   
21,968,811
(4)
   
39.2
%
 
(1) Includes 8,991,223 shares of the Company’s common stock directly owned by Andre DiMino; 1,700,000 shares of the Company’s common stock held by the Andre’ DiMino Irrevocable Trust, a Trustee and the beneficiary of which is Andre’ DiMino, who may be deemed to be a beneficial owner of such shares; 1,700,000 shares of the Company’s common stock held by the Maria Elena DiMino Trust, a Trustee of which is Andre’ DiMino, who may be deemed to be a beneficial owner of such shares by reason of his power to vote such shares; 1,700,000 shares of the Company’s common stock held by the Maurice DiMino Irrevocable Trust, a Trustee of which is Andre’ DiMino, who may be deemed to be a beneficial owner of such shares by reason of his power to vote such shares; 1,300,000 shares which may be acquired by Andre’ Dimino upon the exercise of options; 960 shares owned by Jenny DiMino, the spouse of Andre’ DiMino; 300,000 shares which may be acquired by Jenny DiMino upon the exercise of options; and 4,188,700 shares of the Company’s common stock held by Eugene Stricker, of which Andre’ DiMino may be deemed to be a beneficial owner by reason of his power to vote such shares pursuant to an agreement.
 
 
 

 
 
(2) Includes 1,287,928 shares of the Company’s common stock directly owned by Mr. Vincent DiMino, 300,000 shares of the Company’s common stock owned by the spouse of Vincent DiMino, as to which Mr. DiMino disclaims beneficial ownership; 500,000 shares which may be acquired by Vincent DiMino upon the exercise of options; and 5,100,000 shares of the Company’s common stock of which 1,700,000 shares are held by each of the Andre’ DiMino Irrevocable Trust, the Maria Elena DiMino Irrevocable Trust and the Maurice DiMino Irrevocable Trust, a Trustee of which is Vincent DiMino, who may be deemed to be a beneficial owner of the shares held by such trusts by reason of his power to vote such shares.
 
(3) Mr. Andre’ DiMino may be deemed to be a beneficial owner of such shares by reason of his power to vote such shares pursuant to an agreement. Reference is also made to Footnote No. 1.
 
(4) Reference is made to Footnote Nos. 1 and 2.
 
ITEM 13. CERTAIN RELATIONSHIPS AND RELATED TRANSACTIONS
 
From time to time prior to 2000, the Company has loaned funds to Andre’ DiMino at an interest rate of 3% per annum. The largest aggregate amount of indebtedness, including interest, outstanding at any time since the beginning of the Company’s fiscal year ended March 31, 2003 was approximately $89,900 and the amount of principal and interest outstanding as of March 31, 2010 was approximately $48,000.
 
MANAGEMENT SERVICES AGREEMENT
 
ADM entered into individual management services agreements, dated as of August 15, 2001, with ITI, SMI and Pegasus under which the Company provides such entities with management services and allocates portions of its real property facilities for use by such entities for the conduct of their respective businesses. The management services provided by the Company under the management services agreement include managerial and administrative services, marketing and sales services, clerical and communication services, the maintenance of a checking account and the writing of checks, the maintenance of accounting records and other services in the ordinary course of business. The entities pay ADM for such services on a monthly basis pursuant to an allocation determined by ADM and such entities based on a portion of its applicable costs plus any invoices it receives from third parties specific to each such entity. ADM’s subsidiaries and ITI also use office, manufacturing and storage space in a building located in Northvale, New Jersey, currently leased by the Company, pursuant to the terms of the management services agreement. ADM determines the portion of space allocated to each entity on a monthly basis, and the subsidiaries and ITI are required to reimburse the Company for their respective portions of the lease costs, real property taxes and related costs.
 
 
 

 
 
ITI had approximately $17,000 and $69,000 in management services provided to it by ADM pursuant to the management services agreement during the fiscal years ended March 31, 2010 and 2009, respectively.
 
On August 1, 2009, we entered into an agreement with ITI to provide services described below and canceled our management services agreement described above.  Under the agreement:
 
we provided ITI with engineering services, including quality control and quality assurance services along with regulatory compliance services warehouse fulfillment services and network administration services including hardware and software services;
 
we were paid at the rate of $26,000 per month by ITI for these services; and ITI agreed to terminate the four full time engineers and three part time engineers then employed by ITI.
 
On February 12, 2010 concurrent with the acquisition of ITI’s assets by IHS, we agreed to provide the above services to IHS and IHS agreed to pay us $26,000 per month for such services pursuant to a Master Services Agreement. In June 2010, it was agreed that IHS would pay $11,000 for June 2010 and $5,000 per month thereafter for reduced services performed by ADM.
 
MANUFACTURING AGREEMENT
 
ADM, ITI and SMI are parties to manufacturing agreements, dated as of August 15, 2001, and as amended in February, 2005. The manufacturing agreement with ITI was subsequently assigned to IHS on February 12, 2010. Under the terms of the agreement, the Company has agreed to serve as the exclusive manufacturer of all current and future medical and non-medical electronic and other devices or products to be sold or rented by the entities. For each product that ADM manufactures for each entity, the entity pays ADM an amount equal to 120% of the sum of (i) the actual, invoiced cost for raw materials, parts, components or other physical items that are used in the manufacture of the product and actually purchased for such entity by the Company, if any, plus (ii) a labor charge based on the Company’s standard hourly manufacturing labor rate, which the Company believes is more favorable than could be attained from unaffiliated third-parties. The Company generally purchases and provides ADM with all of the raw materials, parts and components necessary to manufacture the entities’ products. Under the terms of the agreement, if the Company is unable to perform its obligations to either entity under the manufacturing agreement or is otherwise in breach of any provision of the manufacturing agreement, such entity has the right, without penalty, to engage third parties to manufacture some or all of its products. In addition, if the entity elects to utilize a third-party manufacturer to supplement the manufacturing being completed by ADM, such entity has the right to require ADM to accept delivery of its products from these third-party manufacturers, finalize the manufacture of the products to the extent necessary and ensure that the design, testing, control, documentation and other quality assurance procedures during all aspects of the manufacturing process have been met. Reference is made to “Item 1. Description of Business--Manufacturers and Suppliers.”
 
 
 

 
 
As reported in its filings with the SEC, on February 12, 2010, ITI sold substantially all of its assets pursuant to the terms of an asset purchase agreement and ITI expects to be dissolved as soon as practicable thereafter. As a result, our future fiscal periods will not include material purchase orders from ITI, and may not include material purchase orders from the purchaser of its assets. As a result of ITI’s asset sale and expected dissolution, we will be required to seek new customers in order to replace such revenue.
 
Pursuant to the manufacturing agreement, sales of finished goods to ITI during the years ended March 31, 2010 and 2009 were approximately $68,000 and $547,000, respectively.
 
Director Independence
 
Our common stock is not listed on a national securities exchange and therefore, we are not subject to any corporate governance requirements regarding independence of board or committee members.  However, we have chosen the definition of independence contained in the rules of The American Stock Exchange, LLC as a benchmark to evaluate the independence of our directors.  Under the AMEX listing standards, an “independent director” of a company means a person who is not an officer or employee of the company or its subsidiaries and who the board of directors has affirmatively determined does not have a relationship that would interfere with the exercise of independent judgment in carrying out the responsibilities of a director.  Our Board of Directors has determined that none of our current directors or David Saloff, who served as a director during our last fiscal year, are independent directors within the meaning of the applicable AMEX listing standard.
 
ITEM 14. PRINCIPAL ACCOUNTANT FEES AND SERVICES
 
AUDIT FEES
 
The aggregate fees billed for professional services rendered by Raich Ende Malter & Co. LLP (“Raich”) for the audit of the Company’s annual consolidated financial statements for the fiscal years ended March 31, 2010 and 2009, and for the reviews of the financial statements included in the Company’s Quarterly Reports on Form 10-QSB for the fiscal years ended March 31, 2010 and 2009, were $55,290 and $71,445, respectively.
 
AUDIT-RELATED FEES
 
The aggregate fees billed in each of the fiscal years ended March 31, 2010 and 2009 for assurance and related services by Raich that are reasonably related to the performance of the audit or review of the Company’s financial statements and not reported above under “Audit Fees” were $0 and $1,183, respectively.
 
TAX FEES
 
The aggregate fees billed in each of the fiscal years ended March 31, 2010 and 2009 for professional services rendered by Raich for tax compliance, tax advice and tax planning were $12,000 and $12,500, respectively.
 
ALL OTHER FEES
 
The aggregate fees billed in each of the fiscal years ended March 31, 2010 and March 31, 2009 for products and services provided by Raich other than the services reported above under “Audit Fees”, “Audit Related Fees” and “Tax Fees” were $0 and $0 respectively.
 
 
 

 
 
AUDIT COMMITTEE ADMINISTRATION OF THE ENGAGEMENT
 
The Company does not have an audit committee.
 
PART III, ITEM 15. EXHIBITS
 
Exhibit
 
No.
Description
   
3.1
Certificate of Incorporation and amendments thereto filed on August 9, 1976 and May 15, 1978 is incorporated by reference to Exhibit 3(a) to the Company’s Registration Statement Form 10 (File No. 0-17629) (the “Form 10”).
3.2
Certificate of Amendment to Certificate of Incorporation filed December 9, 1996 is incorporated by reference to Exhibit 3(a) to the Company’s Annual Report on Form 10-KSB for the fiscal year ended March 31, 1997.
3.3
By-Laws are incorporated by reference to Exhibit 3(b) to the Form 10.
9.1
Trust Agreements of November 7, 1980 by and between Dr. Alfonso DiMino et al. are incorporated by reference to Exhibit 9 to the Company’s Annual Report on Form 10-KSB for the fiscal year ended March 31, 1993.
10.1
Memorandum of Lease by and between the Company and Cresskill Industrial Park III dated as of August 26, 1993 is hereby incorporated by reference to Exhibit 10(a) to the Company’s Annual Report on Form 10-KSB for the fiscal year March 31, 1994.
10.5
Agreement of January 17, 2003 by and between the Company and Fifth Avenue Venture Capital Partners is hereby incorporated by reference to Exhibit 10.5 to the Company’s Annual Report on Form 10-KSB for the fiscal year ended March 31, 2003.
10.6
Amended and Restated Manufacturing Agreement, dated February 10, 2005, among the Company, Ivivi Technologies, Inc. and Sonotron Medical Systems, Inc. is incorporated by reference to the Company’s Annual Report on Form 10-KSB for the fiscal year ended March 31, 2005.
10.7
Management Services Agreement, dated August 15, 2001, among the Company, Ivivi Technologies, Inc., Sonotron Medical Systems, Inc. and Pegasus Laboratories, Inc., as amended is incorporated by reference to the Company’s Annual Report on Form 10-KSB form the fiscal year ended March 31, 2005.
10.8
Master Services Agreement dated February 12, 2010 by and between ADM Tronics Unlimited Inc and Ivivi Health Sciences LLC.
 
14.1
Code of Ethics is incorporated by reference to the Company’s Annual Report on Form 10-KSB for the fiscal year ended March 31, 2005.
21.1
Subsidiaries of the Company.
31.1
Certification of the Chief Executive Officer of the Company pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
31.2
Certification of the Chief Financial Officer of the Company pursuant to Section 302 of the Sarbanes-Oxley Act of 2002.
32.1
Certification of the Chief Executive Officer and Chief Financial Officer of the Company pursuant to Section 906 of the Sarbanes-Oxley Act of 2002.
 
 
 

 
 
SIGNATURES
 
Pursuant to the requirements of Section 13 or 15(d) of the Securities Exchange Act of 1934, the Registrant has duly caused this report to be signed on its behalf by the undersigned, thereunto duly authorized this 30th day of June, 2010.
 
   
ADM TRONICS UNLIMITED, INC.
 
       
 
By:
/s/ Andre’ DiMino
 
   
Andre’ Di Mino
 
   
Chief Executive Officer
 
 
Pursuant to the requirements of the Securities Exchange Act of 1934, this report has been signed below by the following persons on behalf of the Registrant and in the capacities and on the dates indicated.
 
             Signature
                          Title
Date
       
/s/
Andre’ DiMino
Chief Executive Officer (Principal
June 29, 2010
 
Andre’ DiMino
Executive Officer, Principal
 
   
Financial Officer and Principal
 
   
Accounting Officer) and Director
 
       
/s/
Vincent DiMino
Director
June 29, 2010
 
Vincent DiMino